new guy
new guy
Twas a MK3 not a MK1 - they were still using that HCS engine in them in 1995!
scottcrx94
12-12-2019, 07:17 AM #33Haha sane colour, that's mad I didn't know they used that engine for so long !
Well ill put my custom skills to work and chop a bit out if the spoiler and shave a bit off here and there should be no problem I got a skyline r33 facelift lip to fit the front bumper on a friends Crx, ill update this thread if it goes well.
scottcrx94
14-12-2019, 04:06 AM #35Ah cheers mate, typical I just bought one in white too :laugh:
Well ill put my custom skills to work and chop a bit out if the spoiler and shave a bit off here and there should be no problem I got a skyline r33 facelift lip to fit the front bumper on a friends Crx, ill update this thread if it goes well.
![[Image: IMG_20130124_102847.jpg]](https://lh6.googleusercontent.com/-43pv1YtsBD8/UQENWRyGynI/AAAAAAAAChU/H2uJCLkW49A/s801/IMG_20130124_102847.jpg)
![[Image: IMG_20130124_102858.jpg]](https://lh4.googleusercontent.com/-e3jOdbZ8exc/UQENlLXtgZI/AAAAAAAAChg/W_GgjsFFchU/s902/IMG_20130124_102858.jpg)
![[Image: IMG_20130124_102913.jpg]](https://lh3.googleusercontent.com/-NqZZHq-W8cQ/UQENyq2-XOI/AAAAAAAAChs/vGDCH2tjvjY/s902/IMG_20130124_102913.jpg)
scottcrx94
14-12-2019, 04:17 AM #37Ah that's great thanks mate, I got a rough idea of what I can do with it now :thumbup:
You would have to completely remodel the triangular end mount bits to make it fit just onto the bootlid.
I think you could maybe mount it just on the middle of the bootlid using the middle leg, it would then overhang the lid onto the rear 1/4 on each side which is the only place you could have those triangular sections on the end as they protrude too far forwards. But then you would have to lose the rear wiper, and it would wobble about like crazy when the bootlid was open.
You would have to completely remodel the triangular end mount bits to make it fit just onto the bootlid.
scottcrx94
14-12-2019, 04:26 AM #39Yeah could do that, ill have a look when mine gets here, I'm thinking chop it in half and take a small section out of it and ill take a small section off the triangular ends ill then get the measurements and make a little cardboard mould to use with the GRP and re-shape it. It sounds like a headache but I've done things like this before so ill see what I can do hopefully all goes well !
![[Image: 6055190007_large.jpg]](http://memimage.cardomain.com/ride_images/1/2423/381/6055190007_large.jpg)
11 Guest(s)
11 Guest(s)