Mikalor hose clamps
Mikalor hose clamps
who have got Mikalor hose clamps fitted to their silicon hoses could tell me the sizes of their clamps. I have just fitted some to my car for the 50mm I/D hoses.
And I used the 59 - 63 mm clamps, but was wanting to know if I could get away with the next sizes down. :tongue_smilie:
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
I was just wondering if anyone who has their car Turboed or Supercharged ,
who have got Mikalor hose clamps fitted to their silicon hoses could tell me the sizes of their clamps. I have just fitted some to my car for the 50mm I/D hoses.
And I used the 59 - 63 mm clamps, but was wanting to know if I could get away with the next sizes down. :tongue_smilie:
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
Do you know the outside diameter of the hoses matey? think the next one down is a 55-59mm clamp, and most hoses have a 5-6mm hose wall? I have a 55-59 clamp here at the moment and it just about expands to 60mm on the last couple of threads?
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
When I took of my old upgraded ones just now they are $hit compared to the Mikalor hose clamps
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Ok Chris I just took of a hose to check and its 60mm O/D so I'll have to go with the 59 - 63 mm ones again.
When I took of my old upgraded ones just now they are $hit compared to the Mikalor hose clamps
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
It didnt go down too well :LOCMOD: :laugh:
You wouldnt believe what i have around my house, i even have an original set of 1980's blue velour mini seats up in the loft :blink:
Anyway Moley was just looking at a hose and looks like it might be a bit tight to get the next size down on, unless you use some fairy liquid and force them onto the joints? the hose i have is about 60mm O/D but with a 50mm I/D?
Edit : you know allready
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
Told my other half that i'm going to sell the house, and just buy a big garage with a room above to live in, :w00t:
It didnt go down too well :LOCMOD: :laugh:
You wouldnt believe what i have around my house, i even have an original set of 1980's blue velour mini seats up in the loft :blink:
Anyway Moley was just looking at a hose and looks like it might be a bit tight to get the next size down on, unless you use some fairy liquid and force them onto the joints? the hose i have is about 60mm O/D but with a 50mm I/D?
Edit : you know allready
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
Bobby Bandit....you dont ahve a s/c for an RX-8 in that aircraft hanger do you :wink:
Moley I might need to take a wee run up to P/H to inspect the latest mods next week !
Any time mate, just give us a shout
:Mobile:
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Bobby Bandit....you dont ahve a s/c for an RX-8 in that aircraft hanger do you :wink:
Moley I might need to take a wee run up to P/H to inspect the latest mods next week !
Any time mate, just give us a shout
:Mobile:
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Bobby :thumbup: Will do, guess we are the UK Scotland chapter, as there is a UK North, UK Midlands & UK South chapters.
Sorry starting to take this topic of thread :blushing:
So there is not a UK Scotland chapter :confused::confused:
Wait till I see the management :Bazza::Bazza::Bazza::Bazza::Bazza::Bazza::Bazza:
:Bazza::Bazza::Bazza::Bazza::Bazza::Bazza::Bazza:
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Bobby :thumbup: Will do, guess we are the UK Scotland chapter, as there is a UK North, UK Midlands & UK South chapters.
Sorry starting to take this topic of thread :blushing:
So there is not a UK Scotland chapter :confused::confused:
Wait till I see the management :Bazza::Bazza::Bazza::Bazza::Bazza::Bazza::Bazza:
:Bazza::Bazza::Bazza::Bazza::Bazza::Bazza::Bazza:
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
![[Image: scotlanda.gif]](http://img514.imageshack.us/img514/5757/scotlanda.gif)
3 Guest(s)
3 Guest(s)