JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza Supercharging & Turbo Modifications Shopping list

Shopping list

Shopping list

Pages (4): Previous 1 2 3 4 Next
el_bandido
Account not Activated
2,757
22-12-2019, 04:23 PM
#21
Cheers! Will do. Drop me a PM with your number!
el_bandido
22-12-2019, 04:23 PM #21

Cheers! Will do. Drop me a PM with your number!

el_bandido
Account not Activated
2,757
23-12-2019, 05:56 AM
#22
I've been having a think about cooling, I want to use a toyota aygo automatic radiator for the air to water intercooler, as this means I should be able to use the bottom ports for cooling the engine oil or supercharger oil (normally for auto transmission fluid).

Anyone got any thoughts on this? Should be a fairly elegant solution to provide both on one mount.
Edited 02-02-2013, 04:07 PM by el_bandido.
el_bandido
23-12-2019, 05:56 AM #22

I've been having a think about cooling, I want to use a toyota aygo automatic radiator for the air to water intercooler, as this means I should be able to use the bottom ports for cooling the engine oil or supercharger oil (normally for auto transmission fluid).

Anyone got any thoughts on this? Should be a fairly elegant solution to provide both on one mount.

Rolex
Senior Member
512
23-12-2019, 12:23 PM
#23
I would strongly recommend speaking to Dave and Wayne how fitted his rotrex charger.

I remember speaking to Dave about it wayne had a major job on his hands to make it fit properly.
Rolex
23-12-2019, 12:23 PM #23

I would strongly recommend speaking to Dave and Wayne how fitted his rotrex charger.

I remember speaking to Dave about it wayne had a major job on his hands to make it fit properly.

el_bandido
Account not Activated
2,757
26-12-2019, 11:32 AM
#24
Will have a GTE head and block (with no pistons/rods) available at some point, is this of interest to anyone?

Edit: and 5 speed gearbox
Edited 05-02-2013, 09:09 PM by el_bandido.
el_bandido
26-12-2019, 11:32 AM #24

Will have a GTE head and block (with no pistons/rods) available at some point, is this of interest to anyone?

Edit: and 5 speed gearbox

Sparkystav
Administrator
14,683
26-12-2019, 11:57 AM
#25
I'll take it off you if you give it away? found a whole engine then?

OutlawJapClub Admin Team
Sparkystav
26-12-2019, 11:57 AM #25

I'll take it off you if you give it away? found a whole engine then?


OutlawJapClub Admin Team

el_bandido
Account not Activated
2,757
26-12-2019, 12:02 PM
#26
Waiting for the guy to get back to me with a shipping quote, but yes, found an early one with the air to water intercooler I want and it's low mileage, complete with a gearbox. Only problem is, it's in New Zealand.

Might try to recoup some cost on things like cambs and manifolds, but everything else is yours in exchange for mechanical/electrical assistance :p.
Edited 05-02-2013, 09:38 PM by el_bandido.
el_bandido
26-12-2019, 12:02 PM #26

Waiting for the guy to get back to me with a shipping quote, but yes, found an early one with the air to water intercooler I want and it's low mileage, complete with a gearbox. Only problem is, it's in New Zealand.

Might try to recoup some cost on things like cambs and manifolds, but everything else is yours in exchange for mechanical/electrical assistance :p.

Sparkystav
Administrator
14,683
26-12-2019, 12:17 PM
#27
Bit of a trek for it lol.

Problem is no one wants spares for the GTE, ive weighed in about 4 inlet manifolds and 2 sets of cams.

OutlawJapClub Admin Team
Sparkystav
26-12-2019, 12:17 PM #27

Bit of a trek for it lol.

Problem is no one wants spares for the GTE, ive weighed in about 4 inlet manifolds and 2 sets of cams.


OutlawJapClub Admin Team

el_bandido
Account not Activated
2,757
26-12-2019, 12:18 PM
#28
Inlet manifold I'm probably going to need. Zorst might be useful for someone. Anything I don't need you can have to be honest, saves me finding a place to put it. Might use the sump as well, though I suppose I'd have to block off the lines for the turbos (if they come from the sump).
el_bandido
26-12-2019, 12:18 PM #28

Inlet manifold I'm probably going to need. Zorst might be useful for someone. Anything I don't need you can have to be honest, saves me finding a place to put it. Might use the sump as well, though I suppose I'd have to block off the lines for the turbos (if they come from the sump).

Sparkystav
Administrator
14,683
26-12-2019, 12:37 PM
#29
nope they come from the block,
you cant use the sump as itll be a middle sump probably, not the front sump you need for the IS (the standard one).

OutlawJapClub Admin Team
Sparkystav
26-12-2019, 12:37 PM #29

nope they come from the block,
you cant use the sump as itll be a middle sump probably, not the front sump you need for the IS (the standard one).


OutlawJapClub Admin Team

el_bandido
Account not Activated
2,757
26-12-2019, 12:45 PM
#30
balls. Ok, will have to hope mine isn't damaged.

Edit: Do you want the bits I take out of the 1gfe as well?
Edited 05-02-2013, 11:15 PM by el_bandido.
el_bandido
26-12-2019, 12:45 PM #30

balls. Ok, will have to hope mine isn't damaged.

Edit: Do you want the bits I take out of the 1gfe as well?

Pages (4): Previous 1 2 3 4 Next
Recently Browsing
 5 Guest(s)
Recently Browsing
 5 Guest(s)
Related Threads…
Replies 7
Views 323
16-09-2020, 08:26 AM
Last Post by Rabster