Larger intercooler for TTE compressor kit.
Larger intercooler for TTE compressor kit.
![[Image: u5yvujub.jpg]](http://img.tapatalk.com/d/13/03/29/u5yvujub.jpg)
As packaged.
![[Image: nu8avare.jpg]](http://img.tapatalk.com/d/13/03/29/nu8avare.jpg)
wooden board protection for postage - all 6 sides
![[Image: nytequ8y.jpg]](http://img.tapatalk.com/d/13/03/29/nytequ8y.jpg)
overview
![[Image: yne2e6e5.jpg]](http://img.tapatalk.com/d/13/03/29/yne2e6e5.jpg)
cooling fins in perfect condition
![[Image: a4ubaryg.jpg]](http://img.tapatalk.com/d/13/03/29/a4ubaryg.jpg)
top
![[Image: y8unupy7.jpg]](http://img.tapatalk.com/d/13/03/29/y8unupy7.jpg)
bottom
![[Image: u4yvuru2.jpg]](http://img.tapatalk.com/d/13/03/29/u4yvuru2.jpg)
end
![[Image: 4yvepuga.jpg]](http://img.tapatalk.com/d/13/03/29/4yvepuga.jpg)
fitting kit
![[Image: yba5apeg.jpg]](http://img.tapatalk.com/d/13/03/29/yba5apeg.jpg)
silicone adaptors
i would replace the fitting kit bars for something thicker and use the top mounting point of the cooler as the main fitting to take the weight.
This cooler went in the same position as the original cooler without cutting the crash bar etc, but you would need to use a different mounting system than original - its not plug and play, you need to do a bit of work to secure it.
size of the cooler : fin area 55 x 14 x 6.5 Length x Width x Thickness
total length 70cm.
If i can get the silicone adaptors in the same package then they will be squashed flat, if in not too happy they will be sent with a seperate small package.
sent using my fingers and voodoo magic.
As packaged.
wooden board protection for postage - all 6 sides
overview
cooling fins in perfect condition
top
bottom
end
fitting kit
silicone adaptors
i would replace the fitting kit bars for something thicker and use the top mounting point of the cooler as the main fitting to take the weight.
This cooler went in the same position as the original cooler without cutting the crash bar etc, but you would need to use a different mounting system than original - its not plug and play, you need to do a bit of work to secure it.
size of the cooler : fin area 55 x 14 x 6.5 Length x Width x Thickness
total length 70cm.
If i can get the silicone adaptors in the same package then they will be squashed flat, if in not too happy they will be sent with a seperate small package.
sent using my fingers and voodoo magic.
2 Guest(s)
2 Guest(s)
Views 184
Last Post by
Views 705
Last Post by
Views 255
Last Post by