Emanage ultimate help?
Emanage ultimate help?
In hindsight should of done the ultimate first then the other bits.
I've wired the ignition wires in firing order but it smelling of fuel a bit and just sounding rough.
Anyone got any ideas, cheers
argyle dan
24-02-2020, 10:31 AM #1I need some help, tried to install the ultimate today and now my car isn't running right, I've checked the wiring all seems ok,it's not telling me that its wired up wrong, checked the jumper settings all seems ok, the only thing I've done is install 550cc injectors at the same time and a bigger pulley,
In hindsight should of done the ultimate first then the other bits.
I've wired the ignition wires in firing order but it smelling of fuel a bit and just sounding rough.
Anyone got any ideas, cheers
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
24-02-2020, 10:43 AM #3Its because its over fuelling from the injectors! Have you put the old and new sizes in?
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
argyle dan
24-02-2020, 10:55 AM #4Yeah put in 210 for old ones, 550 for new ones, haven't got a base map, thought by setting the parameters it should be good enough to get us to the engine tuners.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
24-02-2020, 11:32 AM #5I assume no ecu codes?
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
argyle dan
25-02-2020, 02:41 AM #6Eml is on but it won't let me connect , it's just saying not recognised, just rechecked jumpers and wiring all as it should be. Must be something on the parameter set up.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
25-02-2020, 03:03 PM #7Need to get the codes first IMHO.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
argyle dan
26-02-2020, 01:52 AM #8Read the codes nothing important,air intake temp. The car is running just about, I wired the ignition wires in firing order, do I have to do the same for the injectors. Sounds like I've got a misfire, no more eml codes have appeared (yet).
Two things- have you soldered it rather than crimps?
Also when programming the ecu use crank position rather than tacho signal.
What position are the jumpers?
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
26-02-2020, 03:02 AM #10Seems right to me.
Two things- have you soldered it rather than crimps?
Also when programming the ecu use crank position rather than tacho signal.
What position are the jumpers?
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
1 Guest(s)
1 Guest(s)
Views 529
Last Post by
Views 311
Last Post by