JapCarForum Cars, Cars, Cars! Wheels & Tyres Opinions please

Opinions please

Opinions please

Chargespeed
Junior Member
33
11-04-2020, 02:39 PM
#1
I able to get set of 18 x 9.5j Rota GTR's at the right money

At the moment they are pink
I think they look kinda cool
Going put these on my white Altezza
Think it will be very different

What ye all think

[Image: null-52.jpg]
Chargespeed
11-04-2020, 02:39 PM #1

I able to get set of 18 x 9.5j Rota GTR's at the right money

At the moment they are pink
I think they look kinda cool
Going put these on my white Altezza
Think it will be very different

What ye all think

[Image: null-52.jpg]

sprinter2012
Posting Freak
2,484
11-04-2020, 03:32 PM
#2
I think you'll need a trip to a bodyshop to get 9.5s to fit on an IS200 properly, but they would look awesome.
sprinter2012
11-04-2020, 03:32 PM #2

I think you'll need a trip to a bodyshop to get 9.5s to fit on an IS200 properly, but they would look awesome.

Chargespeed
Junior Member
33
11-04-2020, 08:31 PM
#3
Was kinda thinkin that yea
Prob too big and it pull the balls out of it
Chargespeed
11-04-2020, 08:31 PM #3

Was kinda thinkin that yea
Prob too big and it pull the balls out of it

ZAIS200
Senior Member
741
11-04-2020, 10:33 PM
#4
Pink is not my favorite colour but like you said its different and Pink does go with white very well, i reckon it'll work...But Like sprinter said though not sure if a 9.5J rim will fit.
Edited 24-05-2013, 08:11 AM by ZAIS200.
ZAIS200
11-04-2020, 10:33 PM #4

Pink is not my favorite colour but like you said its different and Pink does go with white very well, i reckon it'll work...But Like sprinter said though not sure if a 9.5J rim will fit.

S
Banned
1,153
12-04-2020, 01:56 AM
#5
What are the offsets?
S
12-04-2020, 01:56 AM #5

What are the offsets?

Chargespeed
Junior Member
33
12-04-2020, 02:06 AM
#6
18in x 9.5j et26

I know I will have roll arches but will this be enough
Chargespeed
12-04-2020, 02:06 AM #6

18in x 9.5j et26

I know I will have roll arches but will this be enough

is300_dino
Posting Freak
3,556
12-04-2020, 02:11 AM
#7
the backs you should be ok with some rolling, you may need some chargespeed front wings like stavs got to get the fronts in without scraping the inside arch plastics

jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
is300_dino
12-04-2020, 02:11 AM #7

the backs you should be ok with some rolling, you may need some chargespeed front wings like stavs got to get the fronts in without scraping the inside arch plastics


jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place

S
Banned
1,153
12-04-2020, 04:44 AM
#8
I've done this for you Smile

[Image: IMAG0046.jpg]

You'll have 4"s of dish from the mounting face to the outside arch

And you'll have 5.5"s of dish from the mounting face to the inside arch, arch liner, suspension

You can get a rough idea of fit if, while the car is on the ground, put a tape measure where the wheel meets the mounting face and then see how close 4"s and 5.5"s is to fitting.you'll have to use your imagination a bit too though!

My guess is they probably won't fit, my rear is 9"s and et34/38 (i think) and it's very close.
S
12-04-2020, 04:44 AM #8

I've done this for you Smile

[Image: IMAG0046.jpg]

You'll have 4"s of dish from the mounting face to the outside arch

And you'll have 5.5"s of dish from the mounting face to the inside arch, arch liner, suspension

You can get a rough idea of fit if, while the car is on the ground, put a tape measure where the wheel meets the mounting face and then see how close 4"s and 5.5"s is to fitting.you'll have to use your imagination a bit too though!

My guess is they probably won't fit, my rear is 9"s and et34/38 (i think) and it's very close.

Chargespeed
Junior Member
33
25-04-2020, 01:40 PM
#9
Only seen this now
Cheers man
Chargespeed
25-04-2020, 01:40 PM #9

Only seen this now
Cheers man

Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 10
Views 672
24-12-2019, 09:51 AM
Last Post by el_bandido
Replies 15
Views 1,082
25-06-2019, 07:38 AM
Last Post by Mr Reman