IS200 Turbo HELP needing assistance
IS200 Turbo HELP needing assistance
warhead3005
06-05-2020, 04:05 PM #12Ok so I've just emailed them again with questions to the manifold and air box, will post info once I get a reply.
He says that it doesn't really connect to the stock airbox it can use a portion of it.
The manifold goes over all 6 ports and can be seen
In the picture.
He said the kit is designed for the is200 1g-fe and requires no fabrication.
warhead3005
07-05-2020, 10:21 PM #14Ok so I got a reply,
He says that it doesn't really connect to the stock airbox it can use a portion of it.
The manifold goes over all 6 ports and can be seen
In the picture.
He said the kit is designed for the is200 1g-fe and requires no fabrication.
http://www.turbokits.com/Images/Parts/xr...tslogo.png
I am pretty set on giving the kit a go. So once I get it I will Definately post up pictures and progress shots. Personally I like turbo cars so that's why I'm going down the path of turbo. If all goes well ill be changing the internals from the 1g-gte engine and getting a greddy emanage or haltech computer and change the bits and peices onces the
Whole kit is established.
warhead3005
08-05-2020, 12:25 AM #16Iceman, this is a picture of the kit from thier website
http://www.turbokits.com/Images/Parts/xr...tslogo.png
I am pretty set on giving the kit a go. So once I get it I will Definately post up pictures and progress shots. Personally I like turbo cars so that's why I'm going down the path of turbo. If all goes well ill be changing the internals from the 1g-gte engine and getting a greddy emanage or haltech computer and change the bits and peices onces the
Whole kit is established.
Sparkystav Personally id go for a modified 1/2jz manifold adapted to a 1gfe flange!
How hard would that actually be to do? The exhaust ports don't actually look that far off in terms of spacing. There are a lot of cheap 1jz twin turbo manifolds knocking about on driftworks and there is plenty of room that side of the engine bay....
el_bandido
19-07-2020, 02:17 PM #18Sparkystav Personally id go for a modified 1/2jz manifold adapted to a 1gfe flange!
How hard would that actually be to do? The exhaust ports don't actually look that far off in terms of spacing. There are a lot of cheap 1jz twin turbo manifolds knocking about on driftworks and there is plenty of room that side of the engine bay....
el_bandido How hard would that actually be to do? The exhaust ports don't actually look that far off in terms of spacing. There are a lot of cheap 1jz twin turbo manifolds knocking about on driftworks and there is plenty of room that side of the engine bay....
No particularly hard. It's working a treat on john wan's car
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
19-07-2020, 10:34 PM #19el_bandido How hard would that actually be to do? The exhaust ports don't actually look that far off in terms of spacing. There are a lot of cheap 1jz twin turbo manifolds knocking about on driftworks and there is plenty of room that side of the engine bay....
No particularly hard. It's working a treat on john wan's car
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
1 Guest(s)
1 Guest(s)
Views 1,525
Last Post by
Views 546
Last Post by
Views 771
Last Post by
Views 1,271
Last Post by
Views 596
Last Post by
Views 671
Last Post by
Views 437
Last Post by
Views 344
Last Post by
Views 467
Last Post by