Fog light wiring issues!
Fog light wiring issues!
20-07-2020, 12:18 AM
Sparkystav You could just cheat and run some wires from the stalk to your own relay then directly to the headlights. That way you can get you MOT then sort it out properly.
That is what I was hoping to avoid but I think it will be the way to go. I do not know which wires I need to use from the stalk, though I may be able to figure it out if I try hard enough! I am thinking that the problem is around the steering column, so could I just run new wires from the stalk to the stock light relay under the bonnet? I need to get identifying which wires and relays I need to be working with, does anyone have a wiring diagram for the stalk or the whole light system?
Sparkystav http://www.bahamutcars.com/workshop/IS_9...=tshwl-rhd - Indicators
http://www.bahamutcars.com/workshop/IS_9...ode=hl-rhd- Headlight control
http://www.bahamutcars.com/workshop/IS_9...-11672.pdf - Connector for them both
Them two should help
This looks like very useful info, but the links are broken!
![[Image: tempsig2.jpg]](http://i121.photobucket.com/albums/o227/84stoney/tempsig2.jpg)
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:Sparkystav You could just cheat and run some wires from the stalk to your own relay then directly to the headlights. That way you can get you MOT then sort it out properly.
That is what I was hoping to avoid but I think it will be the way to go. I do not know which wires I need to use from the stalk, though I may be able to figure it out if I try hard enough! I am thinking that the problem is around the steering column, so could I just run new wires from the stalk to the stock light relay under the bonnet? I need to get identifying which wires and relays I need to be working with, does anyone have a wiring diagram for the stalk or the whole light system?
Sparkystav http://www.bahamutcars.com/workshop/IS_9...=tshwl-rhd - Indicators
http://www.bahamutcars.com/workshop/IS_9...ode=hl-rhd- Headlight control
http://www.bahamutcars.com/workshop/IS_9...-11672.pdf - Connector for them both
Them two should help
This looks like very useful info, but the links are broken!
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:
20-07-2020, 01:09 AM
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
20-07-2020, 01:09 AM #32Just fit a separate switch then, as long as its taped down then it should pass
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
20-07-2020, 02:55 AM
Takes up loads of space on my iPad now having the manual on there.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
20-07-2020, 02:55 AM #34I've no idea how old my post to them links are as I know it's been shut for ages.
Takes up loads of space on my iPad now having the manual on there.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
20-07-2020, 03:34 AM
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
The zip with all the pdfs is in the Files area on the fb IS200 group and I also have it in my dropbox if anyone needs it...
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
20-07-2020, 03:58 AM
Sparkystav I've no idea how old my post to them links are as I know it's been shut for ages.
A couple of years, I think. Just seemed to be exactly what I need.
DaveEdin The zip with all the pdfs is in the Files area on the fb IS200 group and I also have it in my dropbox if anyone needs it...
Thanks Dave, I have the pdfs, but there are over 2000 of them and I have no idea which one is the one I need, and don't really have time right now to check through every one.
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:Sparkystav I've no idea how old my post to them links are as I know it's been shut for ages.
A couple of years, I think. Just seemed to be exactly what I need.
DaveEdin The zip with all the pdfs is in the Files area on the fb IS200 group and I also have it in my dropbox if anyone needs it...
Thanks Dave, I have the pdfs, but there are over 2000 of them and I have no idea which one is the one I need, and don't really have time right now to check through every one.
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:
20-07-2020, 06:35 AM
![[Image: lights-1.jpg]](http://i121.photobucket.com/albums/o227/84stoney/lights-1.jpg)
But I think I am a little out of my depth here!
Also, confusingly the wire that is spliced into the red/blue wire on the stalk is connected to "30" on the relay. My limited knowledge of relays tells me that "30" should be the output? I may be barking up the wrong tree! I think I will swap out for another stalk just to sure it's not that before I attempt (and probably fail) to rewire the lights completely.
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:Ok so I have found this: (if you have the files it's r-05.pdf)
But I think I am a little out of my depth here!
Also, confusingly the wire that is spliced into the red/blue wire on the stalk is connected to "30" on the relay. My limited knowledge of relays tells me that "30" should be the output? I may be barking up the wrong tree! I think I will swap out for another stalk just to sure it's not that before I attempt (and probably fail) to rewire the lights completely.
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:
20-07-2020, 08:04 AM
Rabster Relays can be used as 30 as the input and 87 as the output as it still does the same job
Thanks. I figured that a little while after writing this, I guess the 85 and 86 can be swapped too!
I am now having doubts about if this relay is the problem as it seems to be linked to another relay, which is in turn linked to another two, which then go off to, I think, the Clifford alarm!
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:Rabster Relays can be used as 30 as the input and 87 as the output as it still does the same job
Thanks. I figured that a little while after writing this, I guess the 85 and 86 can be swapped too!
I am now having doubts about if this relay is the problem as it seems to be linked to another relay, which is in turn linked to another two, which then go off to, I think, the Clifford alarm!
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:
20-07-2020, 09:33 AM
Have you tried activating the various outputs on the alarm
Sounds like you may be able to turn the lights on from the remote
Recently Browsing
2 Guest(s)
2 Guest(s)
Recently Browsing
2 Guest(s)
2 Guest(s)
Related Threads…
Replies 8
Views 240
Views 240
26-12-2020, 11:25 AM
Last Post bybigdave1701
Last Post by
Replies 15
Views 776
Views 776
12-05-2018, 07:58 AM
Last Post byBOOSST
Last Post by
Replies 14
Views 418
Views 418
06-05-2018, 10:07 AM
Last Post byBOOSST
Last Post by
Replies 9
Views 537
Views 537
20-05-2017, 11:41 PM
Last Post byparthiban
Last Post by
Replies 29
Views 638
Views 638
21-03-2017, 05:16 PM
Last Post byh11exx
Last Post by