GReddy emanage blue
GReddy emanage blue
I am trying to find out how they disable the standard ecu closed-loop lambda control as I've heard that its been done before with the emanage blue.
reganlives
07-05-2021, 02:45 AM #2I've heard that Tuning developments in warrington are good with this.
el_bandido
07-05-2021, 08:05 AM #3I've also heard a lot of bad things about tuning developments. In fact, there is a thread on that very subject over on driftworks.
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
07-05-2021, 09:53 AM #4You won't be able to do it with a basic piggyback like the blue, esp on the lexus
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
stav you seem to know a bit about these. can you suggest one for us that we would be able to use. on ebay they all look the same to me as I don't understand them. ive asked a lot of people and seem to get no answers. do you know anyone that can point me in the right direction if you don't know yourself bud.
I see you came over from tezza world
stav you seem to know a bit about these. can you suggest one for us that we would be able to use. on ebay they all look the same to me as I don't understand them. ive asked a lot of people and seem to get no answers. do you know anyone that can point me in the right direction if you don't know yourself bud.
In theory the ecu needs to be able to output to the standard O2 sensors signals that go to the ecu and tell the ecu everything is rosey. Whilst also take the signal from the sensor to control the fuel.
I'd have to look into it a bit deeper and see of the emanage can simulate a O2 sensor and do it's own closed loop mapping.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
08-05-2021, 06:25 AM #6Not sure how complex the tezza ecu is. With thee Lexus it constantly adjusts so can negate the piggyback over time.
In theory the ecu needs to be able to output to the standard O2 sensors signals that go to the ecu and tell the ecu everything is rosey. Whilst also take the signal from the sensor to control the fuel.
I'd have to look into it a bit deeper and see of the emanage can simulate a O2 sensor and do it's own closed loop mapping.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
08-05-2021, 07:18 AM #8There you go then!
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
jay_russell
08-05-2021, 07:41 AM #9but if you have double lambda sensors you will need to make them into one. you do this inside the ecu box. you just hot wire them as one unit
1 Guest(s)
1 Guest(s)