Brembo Front Calipers and Discs from 350Z
Brembo Front Calipers and Discs from 350Z
16-06-2021, 03:29 AM
You'll see that the discs are covered in rust, but this is only surface rust so should clean up ok. There is only a slight lip on the discs, so they have plenty of life left.
Selling these for £300 for the lot. They're very heavy, so collection would be ideal, though if necessary we can sort out a courier at additional cost.
![[Image: IMG_6175.jpg]](http://s5.photobucket.com/user/SteveHammatt/media/IMG_6175.jpg.html)
![[Image: IMG_6172.jpg]](http://s5.photobucket.com/user/SteveHammatt/media/IMG_6172.jpg.html)
![[Image: IMG_6171.jpg]](http://s5.photobucket.com/user/SteveHammatt/media/IMG_6171.jpg.html)
![[Image: IMG_6170.jpg]](http://s5.photobucket.com/user/SteveHammatt/media/IMG_6170.jpg.html)
![[Image: IMG_6168.jpg]](http://s5.photobucket.com/user/SteveHammatt/media/IMG_6168.jpg.html)
![[Image: IMG_6169.jpg]](http://s5.photobucket.com/user/SteveHammatt/media/IMG_6169.jpg.html)
![[Image: IMG_6177.jpg]](http://s5.photobucket.com/user/SteveHammatt/media/IMG_6177.jpg.html)
![[Image: IMG_6176.jpg]](http://s5.photobucket.com/user/SteveHammatt/media/IMG_6176.jpg.html)
![[Image: IMG_6167.jpg]](http://s5.photobucket.com/user/SteveHammatt/media/IMG_6167.jpg.html)
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
16-06-2021, 03:29 AM #1I'm having a bit of a clear-out. Here are some Brembo front brake calipers (with Red Stuff pads) and discs, from a Nissan 350Z Track edition. I was going to use these for a project but changed my mind, so they've been just stuck in my garage for ages. Ideal big-brake upgrade, since these are four-pot calipers.
You'll see that the discs are covered in rust, but this is only surface rust so should clean up ok. There is only a slight lip on the discs, so they have plenty of life left.
Selling these for £300 for the lot. They're very heavy, so collection would be ideal, though if necessary we can sort out a courier at additional cost.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
16-06-2021, 03:36 AM
any one who is interested these are the same brakes as on Almost finished Is200 Turbo
long time no see hope these go to a good home
any one who is interested these are the same brakes as on Almost finished Is200 Turbo
16-06-2021, 03:45 AM
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
16-06-2021, 03:45 AM #3*waves*
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
16-06-2021, 04:52 AM
thanks
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
16-06-2021, 04:52 AM #4Stevie, can you measure between the mounting bolts please, centre to centre
thanks
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
16-06-2021, 04:53 AM
Sparkystav Stevie, can you measure between the mounting bolts please, centre to centre
Sure, that's those two big bolts sticking out of the bottom, right? If so, that's 10cm.
Edited 28-07-2014, 02:34 PM by steviewevie.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
16-06-2021, 04:53 AM #5Sparkystav Stevie, can you measure between the mounting bolts please, centre to centre
Sure, that's those two big bolts sticking out of the bottom, right? If so, that's 10cm.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
16-06-2021, 06:41 AM
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
16-06-2021, 06:41 AM #6Thank you
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
22-06-2021, 09:50 AM
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
22-06-2021, 09:50 AM #7I'll be putting these on eBay soon.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
26-06-2021, 07:10 AM
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
26-06-2021, 07:10 AM #8Reduced to £270.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
27-06-2021, 01:05 PM
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
27-06-2021, 01:05 PM #9Now sold, via eBay.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
Recently Browsing
2 Guest(s)
2 Guest(s)
Recently Browsing
2 Guest(s)
2 Guest(s)
Related Threads…
Replies 13
Views 362
Views 362
28-12-2023, 01:57 PM
Last Post bySparkystav
Last Post by
Replies 20
Views 561
Views 561
23-01-2023, 08:38 AM
Last Post bycjoseph
Last Post by
Replies 10
Views 431
Views 431
26-10-2020, 12:31 PM
Last Post byMoley
Last Post by
Replies 9
Views 750
Views 750
20-04-2020, 03:19 AM
Last Post bysprinter2012
Last Post by