JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza We wish you well Phil01

We wish you well Phil01

We wish you well Phil01

Pages (4): Previous 1 2 3 4 Next
Dark Samurai
Posting Freak
4,957
18-08-2016, 06:37 AM
#21
I will mate, dont know, he may be looking on here, so he might see it himself.
We got it washed from a place.
I polished it all, i mean lights, Reg Plate, Badges, Grilles, whilst he was hoovering. So we were both helping Big Grin
Dark Samurai
18-08-2016, 06:37 AM #21

I will mate, dont know, he may be looking on here, so he might see it himself.
We got it washed from a place.
I polished it all, i mean lights, Reg Plate, Badges, Grilles, whilst he was hoovering. So we were both helping Big Grin

steviewevie
Posting Freak
7,993
18-08-2016, 07:17 AM
#22
Did they let him out today ? You said he only just had an operation yesterday, I would have thought he'd be in longer after that ?

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
18-08-2016, 07:17 AM #22

Did they let him out today ? You said he only just had an operation yesterday, I would have thought he'd be in longer after that ?


[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

Dark Samurai
Posting Freak
4,957
18-08-2016, 08:29 AM
#23
Nope let out today, he had a stent put in.
Dark Samurai
18-08-2016, 08:29 AM #23

Nope let out today, he had a stent put in.

steviewevie
Posting Freak
7,993
18-08-2016, 09:33 AM
#24
ok, that's good he's been let out, all must have gone well then, fingers crossed for an excellent recovery :thumbup:

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
18-08-2016, 09:33 AM #24

ok, that's good he's been let out, all must have gone well then, fingers crossed for an excellent recovery :thumbup:


[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

Dark Samurai
Posting Freak
4,957
19-08-2016, 08:56 AM
#25
Cheers men.
Dark Samurai
19-08-2016, 08:56 AM #25

Cheers men.

Jambo
Posting Freak
1,125
19-08-2016, 09:12 AM
#26
Glad hes out. What he needs now is a reallllly big lye down Smile. Bet hes exhausted.

Whats a stent? Guessing it just reduces the chance of another clot?

Latest Meets
[COLOR="Red"]Jap Show Finale 10,
Ace Cafe 16/10/10,
Miss Banzai Tunnel Run 16/10/10 -Car No: 368 -Tunnels Completed: 100%[/COLOR]
Jambo
19-08-2016, 09:12 AM #26

Glad hes out. What he needs now is a reallllly big lye down Smile. Bet hes exhausted.

Whats a stent? Guessing it just reduces the chance of another clot?


Latest Meets
[COLOR="Red"]Jap Show Finale 10,
Ace Cafe 16/10/10,
Miss Banzai Tunnel Run 16/10/10 -Car No: 368 -Tunnels Completed: 100%[/COLOR]

Lexusboy
Posting Freak
9,267
19-08-2016, 09:27 AM
#27
Hope dads relaxing at home now Ollie and have you polished his car yet?

Jambo here your answer to what is Stent

A stent is a wire metal mesh tube used to prop open an artery during angioplasty. The stent is collapsed to a small diameter and put over a balloon catheter. It's then moved into the area of the blockage. When the balloon is inflated, the stent expands, locks in place and forms a scaffold. This holds the artery open. The stent stays in the artery permanently, holds it open, improves blood flow to the heart muscle and relieves symptoms (usually chest pain). Within a few weeks of the time the stent was placed, the inside lining of the artery (the endothelium) grows over the metal surface of the stent.
Lexusboy
19-08-2016, 09:27 AM #27

Hope dads relaxing at home now Ollie and have you polished his car yet?

Jambo here your answer to what is Stent

A stent is a wire metal mesh tube used to prop open an artery during angioplasty. The stent is collapsed to a small diameter and put over a balloon catheter. It's then moved into the area of the blockage. When the balloon is inflated, the stent expands, locks in place and forms a scaffold. This holds the artery open. The stent stays in the artery permanently, holds it open, improves blood flow to the heart muscle and relieves symptoms (usually chest pain). Within a few weeks of the time the stent was placed, the inside lining of the artery (the endothelium) grows over the metal surface of the stent.

spikes
Posting Freak
1,153
19-08-2016, 09:47 AM
#28
glad to hear he's home,make sure he takes it easy:biggrin:
spikes
19-08-2016, 09:47 AM #28

glad to hear he's home,make sure he takes it easy:biggrin:

Dark Samurai
Posting Freak
4,957
19-08-2016, 11:19 AM
#29
Ian, i was polishing his car the day of the heart attack. its nice and shiny now, but i cant remember if it has been raining.
Stent - Bit of wikipedia there Wink
Dark Samurai
19-08-2016, 11:19 AM #29

Ian, i was polishing his car the day of the heart attack. its nice and shiny now, but i cant remember if it has been raining.
Stent - Bit of wikipedia there Wink

Jambo
Posting Freak
1,125
19-08-2016, 12:04 PM
#30
Haha. Sounds good anyway, hopefully it will work. Glad hes well and ok.

Latest Meets
[COLOR="Red"]Jap Show Finale 10,
Ace Cafe 16/10/10,
Miss Banzai Tunnel Run 16/10/10 -Car No: 368 -Tunnels Completed: 100%[/COLOR]
Jambo
19-08-2016, 12:04 PM #30

Haha. Sounds good anyway, hopefully it will work. Glad hes well and ok.


Latest Meets
[COLOR="Red"]Jap Show Finale 10,
Ace Cafe 16/10/10,
Miss Banzai Tunnel Run 16/10/10 -Car No: 368 -Tunnels Completed: 100%[/COLOR]

Pages (4): Previous 1 2 3 4 Next
Recently Browsing
 5 Guest(s)
Recently Browsing
 5 Guest(s)