Sat Nav Wireing
Sat Nav Wireing
Does that help mate?
need to know what is the wiring connection for the housing auto open/close when the ignition key is on/off. only left the pcb board on the sat nav housing but the rest has been remove.
many thanks
does this means the yellow wiring connected to the housing will be power constant feed to the pcb board so it "remember" it's position setting like the stereo frequency memory setting?
thanks Rabster for the reply btw
Hi Guys, I have just bought a 7" Sar Nav screen for my IS, I have connected the power wires up and the open/close and tilt is working great.
My question is, does the pin out on the back of the screen have a video output signal which i could wire on a RCA to connect to my Clarion headunit. Or is my gut feeling right that I have got to strip out the standard screen and replace it with another 7" screen with video connections. Just want to ask before I strip down the screen and replace it.
I see a post on LOC where stav was selling a 7" sat nav screen, im wondering if he had to replace the screen in that one?
http://www.lexusownersclub.co.uk/forum/t...installed/
Yes mate, unfortunately you've got to fit an aftermarket screen in there.