New comer from South Africa
New comer from South Africa
Lexus RS200T
04-06-2022, 06:09 PM #1Hi all I am from South Africa. I have a Lexus IS200 with a 3SGTE ST215 engine in.
Sent from my iPhone using Tapatalk
is200turbo
04-06-2022, 09:50 PM #2Welcome , have you got any pics of you putting the engine in?
Sent from my iPhone using Tapatalk
Lexus RS200T
04-06-2022, 10:02 PM #3Yes I do have a few photos where is is test fitted and where the mountings has already being made.
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
05-06-2022, 12:55 AM #4Welcome!
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sent from my iPhone using Tapatalk
is200turbo
05-06-2022, 10:52 PM #7Great I have a Rev 3 mr2 sat on my drive doing nothing I Wight just use the engine in the lexus.
Sent from my iPhone using Tapatalk
Lexus RS200T
06-06-2022, 12:51 AM #8Hi is200turbo. Is a awesome car to have a 3sgte in, but its a lot of work.
is200turbo
06-06-2022, 04:53 AM #9What did u have to do to get it in?
Sent from my iPhone using Tapatalk
Manufacture new engine mountings
Modify oil sump for oil pickup and to clear cross member,
Exhaust is now on the other side of the car, do need to modify the routing of the fuel and brake lines,
New 10mm fuel line and use the existing fuel line at the return line,
New oil coolers,
New power steering coolers
Transmission:
Get hold of a Altezza RS200 bell-housing or transmission,
New transmission mountings,
Had to cut the transmission tunnel because could not get the engine to sit further back due to water ports,
Longer propshaft,
New Intake and exhaust manifolds,
ECU:
New ECU,
Only cut the engine out of the original ecu so that can still work for the whole car and the new ecu only works for the engine,
The rest of the modifications is to your discretion for more power, brake power eye candy etc.
Lexus RS200T
06-06-2022, 05:25 PM #10Engine:
Manufacture new engine mountings
Modify oil sump for oil pickup and to clear cross member,
Exhaust is now on the other side of the car, do need to modify the routing of the fuel and brake lines,
New 10mm fuel line and use the existing fuel line at the return line,
New oil coolers,
New power steering coolers
Transmission:
Get hold of a Altezza RS200 bell-housing or transmission,
New transmission mountings,
Had to cut the transmission tunnel because could not get the engine to sit further back due to water ports,
Longer propshaft,
New Intake and exhaust manifolds,
ECU:
New ECU,
Only cut the engine out of the original ecu so that can still work for the whole car and the new ecu only works for the engine,
The rest of the modifications is to your discretion for more power, brake power eye candy etc.
1 Guest(s)
1 Guest(s)
Views 147
Last Post by
Views 199
Last Post by
Views 101
Last Post by
Views 645
Last Post by
Views 635
Last Post by
Views 321
Last Post by
Views 899
Last Post by