Jimbobs Lexus IS200 Turbo!

Sparkystav
Administrator

14,683

17-11-2023, 02:48 AM

#1,301

so the gearbox fits the trans tunnel?

Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.

OutlawJapClub Admin Team

Jimbob-T-Lex
Moderator

1,674

17-11-2023, 03:38 AM

#1,302

Yeah mate from what I can tell at present. Need to mount it and I'll check all clearances. May need to modify slightly for slave cylinder.

Sent from my iPhone using Tapatalk

OutlawJapClub Admin Team

Wayne
Senior Member

607

17-11-2023, 03:56 AM

#1,303

Is that a TRD yellow bar I see?

Jimbob-T-Lex
Moderator

1,674

17-11-2023, 06:54 AM

#1,304

Yeah mate front and rear

Sent from my iPhone using Tapatalk

OutlawJapClub Admin Team

Wayne
Senior Member

607

17-11-2023, 08:39 AM

#1,305

Let me have em...

Jimbob-T-Lex
Moderator

1,674

17-11-2023, 10:27 AM

#1,306

Lol not a chance hahaha

Sent from my iPhone using Tapatalk

OutlawJapClub Admin Team

Wayne
Senior Member

607

18-11-2023, 03:31 AM

#1,307

ad:

Only place I can seem to find em is on Jauce... been looking at Hotchkis, but I hear they are very stiff.

dimis
Posting Freak

3,795

23-11-2023, 11:37 AM

#1,308

Wayne ad:

Only place I can seem to find em is on Jauce... been looking at Hotchkis, but I hear they are very stiff.

Hotckis are adjustable and so stiff as you may think.

LEXUS IS200 - The most fun car to go sideways

Jimbob-T-Lex
Moderator

1,674

28-11-2023, 11:29 AM

#1,309

Well started today by sorting out my shifter location. Using an arm off of a BMW 1 series but still had to cut down. Try and get this welded up this week.

[Image: 1d42b692bbffbbaa9efd133727f50a1f.jpg]

[Image: 1d42b692bbffbbaa9efd133727f50a1f.jpg]

Also cut the shifter link I'll weld that tomorrow if I get home from work decent time.

[Image: 7cc3d07ed48cf37ffacc7c5b429b0e0b.jpg]

Mounted my forge power steering reservoir

[Image: 6a5abaf0d9eba731a1abddefe1f82cf8.jpg]

FPR mounted at the back on bulkhead

[Image: 47a8a8ec0572e796e4dc843979ce8011.jpg]

Intercooler put in place just need to mount to crash bar as just sitting at present. Think I'm going to cut some holes through it also as it does cover a fair portion.

[Image: 8cde2678112c5aa865bbfa28cd8ddcd7.jpg]

[Image: 8cde2678112c5aa865bbfa28cd8ddcd7.jpg]

Still need to get throttle cable bracket from a non drive by wire 1JZ

[Image: a88578aa581c6789c74339d324ae5f5c.jpg]

Main things still to do is gearbox support and propshaft but slowly getting there now.

I'll order my silicone bits so I begin to plumb it all in.

Still got to finish wiring in the Ecu but want to get some plugs so engine harness is not hard wired.

Hopefully I'll make some good progress and update again soon.

Sent from my iPhone using Tapatalk

OutlawJapClub Admin Team

dimis
Posting Freak

3,795

28-11-2023, 01:07 PM

#1,310

How big is the intercooler mate? What HP rated? What HP are you aiming? From the pics I think it is small. I would say no more than 350hp.

LEXUS IS200 - The most fun car to go sideways

Recently Browsing
12 Guest(s)