Is 200 track car!!!

JapCarForum Cars, Cars, Cars! Project Cars Is 200 track car!!!

Is 200 track car!!!

Pages (10): Previous 1 … 6 7 8 9 10 Next

Jimbob-T-Lex
Moderator

1,674

31-12-2023, 07:32 PM

#81

great progress mate!! good interesting read. Impressed with your work look forward to seeing it all bolted on!

Jimbob-T-Lex

31-12-2023, 07:32 PM #81

great progress mate!! good interesting read. Impressed with your work look forward to seeing it all bolted on!

Malbrow
Member

28-11-2024, 11:45 AM

#82

Well here's a little update on the worlds slowest project, i blame having kids and a wife. but the engine is finally in with the gearbox attached but this doesnt come without its own problems.

With the engine in place the gearbox is touching the roof of the gearbox tunnel and if i drop the engine down it sits on the steering rack great!!! i will have to make some more mounts so the engine sits higher and point the gearbox on an angle. i will still have to adjust the tunnel but hopefully the prop angle will not be as much.

Engine going in,

[Image: A5BA2739-2FB8-410B-8364-8784F4F9C273_zpshmbubjva.jpg]

Malbrow

28-11-2024, 11:45 AM #82

Malbrow
Member

28-11-2024, 11:47 AM

#83

My beautiful engine stand ��

[Image: 10C8BFEB-3F83-4101-AA4F-54D269185581_zpspoo3gqju.jpg]

Malbrow

28-11-2024, 11:47 AM #83

My beautiful engine stand ��

Malbrow
Member

28-11-2024, 11:48 AM

#84

This is where it was tight on the steering rack

[Image: 90FE2117-EDD8-4AFA-BADA-D848A64189E1_zpsjcte3sr0.jpg]

Malbrow

28-11-2024, 11:48 AM #84

This is where it was tight on the steering rack

Malbrow
Member

28-11-2024, 11:50 AM

#85

Iv also had to do some minor adjustments to the tunnel started with a small window

[Image: 729CC424-59A9-4047-B39B-83C138D0725B_zpszuli1b1n.jpg]

Malbrow

28-11-2024, 11:50 AM #85

Iv also had to do some minor adjustments to the tunnel started with a small window

Malbrow
Member

28-11-2024, 11:50 AM

#86

Ended up like this ��

[Image: 7AB00D31-C073-4C8B-9A3F-33B68818EAE0_zpsnx5keuqn.jpg]

Malbrow

28-11-2024, 11:50 AM #86

Ended up like this ��

Sparkystav
Administrator

14,683

28-11-2024, 07:12 PM

#87

What's hitting the rack? The sump or the block itself?

Sent from my iPad using Tapatalk

Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.

OutlawJapClub Admin Team

Sparkystav

28-11-2024, 07:12 PM #87

What's hitting the rack? The sump or the block itself?

Sent from my iPad using Tapatalk

Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.

OutlawJapClub Admin Team

Malbrow
Member

29-11-2024, 04:16 AM

#88

The bottom of the engine iv picked gearbox up to clear it that's why iv stated to modify the tunnel but don't know if angle is too much for prop.

Malbrow

29-11-2024, 04:16 AM #88

The bottom of the engine iv picked gearbox up to clear it that's why iv stated to modify the tunnel but don't know if angle is too much for prop.

Malbrow
Member

20-12-2024, 06:28 PM

#89

Iv managed to pick the engine up enough to give good clearance and means the prop will not be on an angle [Image: f2fecb9d6b708874045b7478b2633fd4.jpg]

[Image: f2fecb9d6b708874045b7478b2633fd4.jpg]

Sent from my iPhone using Tapatalk

Malbrow

20-12-2024, 06:28 PM #89

Iv managed to pick the engine up enough to give good clearance and means the prop will not be on an angle [Image: f2fecb9d6b708874045b7478b2633fd4.jpg]

Sent from my iPhone using Tapatalk