JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza More Problems.....

More Problems.....

More Problems.....

Pages (4): Previous 1 2 3 4 Next
Sparkystav
Administrator
14,683
07-09-2016, 01:02 PM
#11
not with the thermostat but with the cooling system, as it boils at a lower temp when under pressure so will be steam not liquid going around the system

OutlawJapClub Admin Team
Sparkystav
07-09-2016, 01:02 PM #11

not with the thermostat but with the cooling system, as it boils at a lower temp when under pressure so will be steam not liquid going around the system


OutlawJapClub Admin Team

ibby
Member
163
07-09-2016, 01:15 PM
#12
ok, But I dont think the water is at boiling point as the top hose is just warm.

does it sound like I have air in the system or faulty... thermostat ?
ibby
07-09-2016, 01:15 PM #12

ok, But I dont think the water is at boiling point as the top hose is just warm.

does it sound like I have air in the system or faulty... thermostat ?

steviewevie
Posting Freak
7,993
07-09-2016, 10:19 PM
#13
You could do with getting the codes read with an OBDII reader to see why the engine check light is on. Could be the speed sensors, especially since you've had a front-end collision (i.e. the front sensors).

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
07-09-2016, 10:19 PM #13

You could do with getting the codes read with an OBDII reader to see why the engine check light is on. Could be the speed sensors, especially since you've had a front-end collision (i.e. the front sensors).


[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

steviewevie
Posting Freak
7,993
07-09-2016, 11:27 PM
#14
By the way, the thermostat on the IS200 is in the side of the water pump, so that's neither right at the very bottom or very top, surely ?

Diagram

Edit - ok, I guess it's at the bottom of the cooling system really, since it's taking the coolant outlet from the radiator into the water pump.
Edited 20-10-2009, 09:05 AM by steviewevie.

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
07-09-2016, 11:27 PM #14

By the way, the thermostat on the IS200 is in the side of the water pump, so that's neither right at the very bottom or very top, surely ?

Diagram

Edit - ok, I guess it's at the bottom of the cooling system really, since it's taking the coolant outlet from the radiator into the water pump.


[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

ibby
Member
163
07-09-2016, 11:34 PM
#15
steviewevie You could do with getting the codes read with an OBDII reader to see why the engine check light is on. Could be the speed sensors, especially since you've had a front-end collision (i.e. the front sensors).

When you reffer to speed sensors
Are we talking about abs ?

I actually started my car and drove it down after the collison happened!
I didnt see any lights then
ibby
07-09-2016, 11:34 PM #15

steviewevie You could do with getting the codes read with an OBDII reader to see why the engine check light is on. Could be the speed sensors, especially since you've had a front-end collision (i.e. the front sensors).

When you reffer to speed sensors
Are we talking about abs ?

I actually started my car and drove it down after the collison happened!
I didnt see any lights then

ibby
Member
163
07-09-2016, 11:38 PM
#16
steviewevie By the way, the thermostat on the IS200 is in the side of the water pump, so that's neither right at the very bottom or very top, surely ?

Diagram

Edit - ok, I guess it's at the bottom of the cooling system really, since it's taking the coolant outlet from the radiator into the water pump.

Yep, Thats what I meant, at the bottom and side of the water pump :blushing:

I havent tried the heater trick!

Iam going to go do that!
ibby
07-09-2016, 11:38 PM #16

steviewevie By the way, the thermostat on the IS200 is in the side of the water pump, so that's neither right at the very bottom or very top, surely ?

Diagram

Edit - ok, I guess it's at the bottom of the cooling system really, since it's taking the coolant outlet from the radiator into the water pump.

Yep, Thats what I meant, at the bottom and side of the water pump :blushing:

I havent tried the heater trick!

Iam going to go do that!

steviewevie
Posting Freak
7,993
07-09-2016, 11:40 PM
#17
ibby When you reffer to speed sensors
Are we talking about abs ?

I actually started my car and drove it down after the collison happened!
I didnt see any lights then

Yes, the speed sensors are used both by the ABS and TRC systems. They have quite fine cabling though, which is easily damaged. If they were ok after the collision, could they have been perhaps damaged if you've had to mess around with the front wheels/suspension ? Or maybe you haven't touched that.

Would be good to get the codes checked though, so we can tell for sure.

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
07-09-2016, 11:40 PM #17

ibby When you reffer to speed sensors
Are we talking about abs ?

I actually started my car and drove it down after the collison happened!
I didnt see any lights then

Yes, the speed sensors are used both by the ABS and TRC systems. They have quite fine cabling though, which is easily damaged. If they were ok after the collision, could they have been perhaps damaged if you've had to mess around with the front wheels/suspension ? Or maybe you haven't touched that.

Would be good to get the codes checked though, so we can tell for sure.


[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

Lexusboy
Posting Freak
9,267
07-09-2016, 11:45 PM
#18
Ibby at this stage of your rebuild i think a obd code reader some thing like this would be a worth while investement.
The one i have listed is acheap one.
http://cgi.ebay.co.uk/U380-OBD-2-II-EOBD...3ef0d29d25
Lexusboy
07-09-2016, 11:45 PM #18

Ibby at this stage of your rebuild i think a obd code reader some thing like this would be a worth while investement.
The one i have listed is acheap one.
http://cgi.ebay.co.uk/U380-OBD-2-II-EOBD...3ef0d29d25

steviewevie
Posting Freak
7,993
07-09-2016, 11:50 PM
#19
^^^^ That's exactly the same one as I've got.

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
07-09-2016, 11:50 PM #19

^^^^ That's exactly the same one as I've got.


[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

Lexusboy
Posting Freak
9,267
07-09-2016, 11:52 PM
#20
Steve what sort of feedback would you give this reader?
Lexusboy
07-09-2016, 11:52 PM #20

Steve what sort of feedback would you give this reader?

Pages (4): Previous 1 2 3 4 Next
Recently Browsing
 2 Guest(s)
Recently Browsing
 2 Guest(s)
Related Threads…
Replies 1
Views 489
29-08-2021, 09:59 AM
Last Post by Sparkystav
Replies 5
Views 228
06-01-2020, 07:01 PM
Last Post by Sparkystav
Replies 7
Views 628
27-06-2019, 10:25 AM
Last Post by Matt_C
Replies 6
Views 382
16-03-2019, 10:07 PM
Last Post by lex2oos
Replies 17
Views 994
04-11-2018, 05:02 AM
Last Post by Stoney
Replies 45
Views 2,155
28-09-2017, 11:48 PM
Last Post by steviewevie
Replies 6
Views 448
27-04-2017, 12:56 PM
Last Post by Namking998
Replies 126
Views 9,105
12-02-2017, 11:30 AM
Last Post by Andy-R.
Replies 28
Views 1,373
31-08-2016, 08:47 AM
Last Post by Sparkystav