MOT the Morn
MOT the Morn
10-10-2016, 04:27 AM
toxo Getting the car really hot if it's got no CAT should make absolutely sod all difference. Getting the manifold and midpipes hot does nothing to aid combustion (and it only alters backpressure slightly through convection which is irrelevant on an FI engine) so once your engine is up to temp it should be the same after a gentle drive as a hard one. The reason for getting the CAT hot is that the platinum inside it will only react with the CO2 past a certain temperature.
On an engine with no CAT you should see minimal difference between it being warm and really hot. However if your lambda sensor is on the way out then it may make a difference as they have to be mega hot in order to function correctly as well, which is why modern ones have heaters in them!
Anyway back on topic, I hope it gets through!
Hmmmm i wonder why mine failed then went through whilst very hot? never know now because it has all changed!!
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
10-10-2016, 04:27 AM #42toxo Getting the car really hot if it's got no CAT should make absolutely sod all difference. Getting the manifold and midpipes hot does nothing to aid combustion (and it only alters backpressure slightly through convection which is irrelevant on an FI engine) so once your engine is up to temp it should be the same after a gentle drive as a hard one. The reason for getting the CAT hot is that the platinum inside it will only react with the CO2 past a certain temperature.
On an engine with no CAT you should see minimal difference between it being warm and really hot. However if your lambda sensor is on the way out then it may make a difference as they have to be mega hot in order to function correctly as well, which is why modern ones have heaters in them!
Anyway back on topic, I hope it gets through!
Hmmmm i wonder why mine failed then went through whilst very hot? never know now because it has all changed!!
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
10-10-2016, 04:27 AM
russelllinn Any news Moley? Hope you're having a bit more luck today.
Have you changed anything since last years MOT and if so could you possibly put it back to that for the time being?
Just went from a Blue Flame cat back exhaust to a HKS silent high power.
Had a look at Redx , but dont know what kind to get.
The options are injector cleaner, fuel system cleaner and octain booster
Edited 22-11-2009, 01:19 PM by Moley.
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
russelllinn Any news Moley? Hope you're having a bit more luck today.
Have you changed anything since last years MOT and if so could you possibly put it back to that for the time being?
Just went from a Blue Flame cat back exhaust to a HKS silent high power.
Had a look at Redx , but dont know what kind to get.
The options are injector cleaner, fuel system cleaner and octain booster
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
10-10-2016, 07:32 AM
![[Image: ormiedit1-2.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/ormiedit1-2.jpg)
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
tank of vpower burns hotter and has a cleaning agent in it!!theirfor dropping emmissions
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
10-10-2016, 07:36 AM
Will have to drive 20 miles to get Tesco 99 and I'll start to use that all the time from now on
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Ok I'll go for that. Even though you cant get it in Peterhead.
Will have to drive 20 miles to get Tesco 99 and I'll start to use that all the time from now on
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
10-10-2016, 08:03 AM
40mm Lowering Springs, Re-sprayed Front, 6000K HID's, Re-furbed alloys, Bandit Induction Kit (cheers Chris), Raised boot spoiler with LED, Blue calipers with silver decals, De-badged rear, Chrome Oil Filler Cap (thanks to Chris again), White LED dash bulbs, Blue a/c control bulbs, Blue door markers and interior lights, Sony head unit, Chrome Lexus tax disc holder, TRD side skirts, Original Saloon Front Bumper re-fitted instead of Sportcross
![[Image: Lf9Nl.jpg]](http://i.imgur.com/Lf9Nl.jpg)
Hope you get this sorted soon matey:biggrin:
40mm Lowering Springs, Re-sprayed Front, 6000K HID's, Re-furbed alloys, Bandit Induction Kit (cheers Chris), Raised boot spoiler with LED, Blue calipers with silver decals, De-badged rear, Chrome Oil Filler Cap (thanks to Chris again), White LED dash bulbs, Blue a/c control bulbs, Blue door markers and interior lights, Sony head unit, Chrome Lexus tax disc holder, TRD side skirts, Original Saloon Front Bumper re-fitted instead of Sportcross
10-10-2016, 08:10 AM
But how wrong was I :o:o
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
All I expected was for it to sail through and for everyone to say well done :thumbup1:
But how wrong was I :o:o
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
10-10-2016, 08:23 AM
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
10-10-2016, 08:23 AM #48Come and get your 50p Gord.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
10-10-2016, 08:24 AM
Think you could have cleaned up mate
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Ok can I have a share of the winnings :drink:
Think you could have cleaned up mate
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
11-10-2016, 05:57 AM
toxo However if your lambda sensor is on the way out then it may make a difference as they have to be mega hot in order to function correctly as well, which is why modern ones have heaters in them!
The sensors on the IS200 do have heaters in them.
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
11-10-2016, 05:57 AM #50toxo However if your lambda sensor is on the way out then it may make a difference as they have to be mega hot in order to function correctly as well, which is why modern ones have heaters in them!
The sensors on the IS200 do have heaters in them.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
Recently Browsing
7 Guest(s)
7 Guest(s)
Recently Browsing
7 Guest(s)
7 Guest(s)