JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza MOT the Morn

MOT the Morn

MOT the Morn

Pages (10): Previous 14 5 6 7 810 Next  
P.Lindblom
Posting Freak
821
11-10-2016, 08:02 AM
#51
Moley, Moley I might have a solution for you :w00t:

I haven't read the whole thread, but as far as I understand only your CO was over the limit? If so, it should be a piece of cake if you just want to pass your MOT.

In Sweden a super common solution to lower the CO dramatically is to just pop down to the nearest petrol station and give the car like 20-30% E85 (bio ethanol fuel), that more or less eliminates the CO emissions completely.

Do you have E85 fuel in Britain?
P.Lindblom
11-10-2016, 08:02 AM #51

Moley, Moley I might have a solution for you :w00t:

I haven't read the whole thread, but as far as I understand only your CO was over the limit? If so, it should be a piece of cake if you just want to pass your MOT.

In Sweden a super common solution to lower the CO dramatically is to just pop down to the nearest petrol station and give the car like 20-30% E85 (bio ethanol fuel), that more or less eliminates the CO emissions completely.

Do you have E85 fuel in Britain?

Moley
Posting Freak
6,230
11-10-2016, 08:14 AM
#52
P.Lindblom Moley, Moley I might have a solution for you :w00t:

I haven't read the whole thread, but as far as I understand only your CO was over the limit? If so, it should be a piece of cake if you just want to pass your MOT.

In Sweden a super common solution to lower the CO dramatically is to just pop down to the nearest petrol station and give the car like 20-30% E85 (bio ethanol fuel), that more or less eliminates the CO emissions completely.

Do you have E85 fuel in Britain?

Dont know mate about Britain but definitely not up with me in the NE of Scotland but thanks anyway

Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Moley
11-10-2016, 08:14 AM #52

P.Lindblom Moley, Moley I might have a solution for you :w00t:

I haven't read the whole thread, but as far as I understand only your CO was over the limit? If so, it should be a piece of cake if you just want to pass your MOT.

In Sweden a super common solution to lower the CO dramatically is to just pop down to the nearest petrol station and give the car like 20-30% E85 (bio ethanol fuel), that more or less eliminates the CO emissions completely.

Do you have E85 fuel in Britain?

Dont know mate about Britain but definitely not up with me in the NE of Scotland but thanks anyway


Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice

dandydons
Member
167
11-10-2016, 11:35 AM
#53
I have an original airbox and filter if you want to borrow to try that . Would need picking up though?
dandydons
11-10-2016, 11:35 AM #53

I have an original airbox and filter if you want to borrow to try that . Would need picking up though?

Moley
Posting Freak
6,230
11-10-2016, 11:43 AM
#54
Thanks for the offer mate but I cant see that helping, I would have thought the induction kit would give you better air flow

Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Moley
11-10-2016, 11:43 AM #54

Thanks for the offer mate but I cant see that helping, I would have thought the induction kit would give you better air flow


Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice

Sparkystav
Administrator
14,683
11-10-2016, 11:50 AM
#55
we do in some places mate, though i think theres only about 5 or 6 places in the country

OutlawJapClub Admin Team
Sparkystav
11-10-2016, 11:50 AM #55

we do in some places mate, though i think theres only about 5 or 6 places in the country


OutlawJapClub Admin Team

dandydons
Member
167
11-10-2016, 11:51 AM
#56
Moley Thanks for the offer mate but I cant see that helping, I would have thought the induction kit would give you better air flow

Not sure if it would help either but it's here if you want to try. I always had the same problem with starlet running a decat until I found out that imports did not get standard emissions test since there was not a uk equivalent.. Was very happy to point that out to my local MOT guy.

Try all mentioned above - Vpower, clean filter, rag it a bit.

Do you usually just run standard fuel ?

I have been using vpower all the time until very recently - switched to esso 97ron and seems to like that better.
dandydons
11-10-2016, 11:51 AM #56

Moley Thanks for the offer mate but I cant see that helping, I would have thought the induction kit would give you better air flow

Not sure if it would help either but it's here if you want to try. I always had the same problem with starlet running a decat until I found out that imports did not get standard emissions test since there was not a uk equivalent.. Was very happy to point that out to my local MOT guy.

Try all mentioned above - Vpower, clean filter, rag it a bit.

Do you usually just run standard fuel ?

I have been using vpower all the time until very recently - switched to esso 97ron and seems to like that better.

ormi
Posting Freak
3,006
11-10-2016, 12:21 PM
#57
when is your retest??

[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
ormi
11-10-2016, 12:21 PM #57

when is your retest??


[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more

Moley
Posting Freak
6,230
11-10-2016, 12:24 PM
#58
Going to try and get it done this week not sure when though

Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Moley
11-10-2016, 12:24 PM #58

Going to try and get it done this week not sure when though


Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice

ormi
Posting Freak
3,006
11-10-2016, 01:04 PM
#59
pm me your address mate i'll sort you out...Wink :thumbup1:

[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
ormi
11-10-2016, 01:04 PM #59

pm me your address mate i'll sort you out...Wink :thumbup1:


[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more

steviewevie
Posting Freak
7,993
11-10-2016, 01:23 PM
#60
There are a few Morrisons that do E85. Given that Morrisons are Scottish, there might be one not a million miles away from you Moley ? Could be worth calling them and asking.

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
11-10-2016, 01:23 PM #60

There are a few Morrisons that do E85. Given that Morrisons are Scottish, there might be one not a million miles away from you Moley ? Could be worth calling them and asking.


[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

Pages (10): Previous 14 5 6 7 810 Next  
Recently Browsing
 3 Guest(s)
Recently Browsing
 3 Guest(s)