My new toys
My new toys
12-10-2016, 11:08 AM
Marsdendean What things are you using to polish things.
Im going to get the mrs to get me some stuff so i can start polishing the main block of my engine, just unsure what i need
Well mate, i got a polishing kit, which included two braces. The first brace is used to grain the metal (it looks like it is made of stiff plastic threads) and the second (made of cloth) is used to do a finishing polish. The kit also inncluded two types of waxes. The first one is used with the first brace and the second with the polishing brace. I will take some photos tomorrow if you want.
LEXUS IS200 - The most fun car to go sideways
Marsdendean What things are you using to polish things.
Im going to get the mrs to get me some stuff so i can start polishing the main block of my engine, just unsure what i need
Well mate, i got a polishing kit, which included two braces. The first brace is used to grain the metal (it looks like it is made of stiff plastic threads) and the second (made of cloth) is used to do a finishing polish. The kit also inncluded two types of waxes. The first one is used with the first brace and the second with the polishing brace. I will take some photos tomorrow if you want.
LEXUS IS200 - The most fun car to go sideways
12-10-2016, 11:30 AM
![[Image: is200-rebuild-9-small-300x222.jpg]](http://tdi-plc.com/blog/wp-content/uploads/2008/09/is200-rebuild-9-small-300x222.jpg)
the block is the big black bit!
Edited 23-11-2009, 09:17 PM by ormi.
![[Image: ormiedit1-2.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/ormiedit1-2.jpg)
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
polishing your engine block???you sure?lot of stripping to do that!most people just paint coz its cast iron,doesn't come up too well also gets very hot so it won't stay shiney for long(if you can get it shiney).
the block is the big black bit!
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
12-10-2016, 11:40 AM
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
12-10-2016, 11:40 AM #195You could try cleaning up the cylinder head Dean, the bit that's on the top underneath the engine covers. That's aluminium, but just cleaning it would make it look better. Trouble is, it's quite messy under there, and doesn't look that elegant with the covers off.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
12-10-2016, 11:44 AM
On the charger mate give it a good rub over with a green brillo pad (like you use to do the dishes?) if you have one first, as it'll get rid of a lot of the oxidisation on it and give it a good base for the polishing :thumbup1:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
Very nice Dimis, you'll soon have the polishing bug
On the charger mate give it a good rub over with a green brillo pad (like you use to do the dishes?) if you have one first, as it'll get rid of a lot of the oxidisation on it and give it a good base for the polishing :thumbup1:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
12-10-2016, 11:47 AM
Bandit Very nice Dimis, you'll soon have the polishing bug
On the charger mate give it a good rub over with a green brillo pad (like you use to do the dishes?) if you have one first, as it'll get rid of a lot of the oxidisation on it and give it a good base for the polishing :thumbup1:
Thanks for the tip mate. :thumbup1:
LEXUS IS200 - The most fun car to go sideways
Bandit Very nice Dimis, you'll soon have the polishing bug
On the charger mate give it a good rub over with a green brillo pad (like you use to do the dishes?) if you have one first, as it'll get rid of a lot of the oxidisation on it and give it a good base for the polishing :thumbup1:
Thanks for the tip mate. :thumbup1:
LEXUS IS200 - The most fun car to go sideways
12-10-2016, 11:50 AM
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
i made a shiney engine cover for mine(bandits template) as has been said its not nice with out the covers.when you fit the induction kit you loose the big air box which is a cover as well.so fitting a induction kit makes it sound better but make the engine bay look messy.
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
12-10-2016, 12:00 PM
Bandit Very nice Dimis, you'll soon have the polishing bug
On the charger mate give it a good rub over with a green brillo pad (like you use to do the dishes?) if you have one first, as it'll get rid of a lot of the oxidisation on it and give it a good base for the polishing :thumbup1:
Just to clarify, I think you mean one of those green nylon scouring pads, right ? Not a metal brillo pad ?
ormi i made a shiney engine cover for mine(bandits template) as has been said its not nice with out the covers.when you fit the induction kit you loose the big air box which is a cover as well.so fitting a induction kit makes it sound better but make the engine bay look messy.
Yep, very nice solution :thumbup1:
Actually that would be a pretty easy thing to get made Dean, you just need to make a cardboard template and get it to the exact right size/bolt-holes etc, and then take it to a metal fabricator to cut out of some nice shiny steel
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
12-10-2016, 12:00 PM #199Bandit Very nice Dimis, you'll soon have the polishing bug
On the charger mate give it a good rub over with a green brillo pad (like you use to do the dishes?) if you have one first, as it'll get rid of a lot of the oxidisation on it and give it a good base for the polishing :thumbup1:
Just to clarify, I think you mean one of those green nylon scouring pads, right ? Not a metal brillo pad ?
ormi i made a shiney engine cover for mine(bandits template) as has been said its not nice with out the covers.when you fit the induction kit you loose the big air box which is a cover as well.so fitting a induction kit makes it sound better but make the engine bay look messy.
Yep, very nice solution :thumbup1:
Actually that would be a pretty easy thing to get made Dean, you just need to make a cardboard template and get it to the exact right size/bolt-holes etc, and then take it to a metal fabricator to cut out of some nice shiny steel
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
12-10-2016, 12:01 PM
steviewevie Just to clarify, I think you mean one of those green nylon scouring pads, right ? Not a metal brillo pad ?
Yep, very nice solution :thumbup1:
Actually that would be a pretty easy thing to get made Dean, you just need to make a cardboard template and get it to the exact right size/bolt-holes etc, and then take it to a metal fabricator to cut out of some nice shiny steel
You could also try carbon fiber instead of steel
LEXUS IS200 - The most fun car to go sideways
steviewevie Just to clarify, I think you mean one of those green nylon scouring pads, right ? Not a metal brillo pad ?
Yep, very nice solution :thumbup1:
Actually that would be a pretty easy thing to get made Dean, you just need to make a cardboard template and get it to the exact right size/bolt-holes etc, and then take it to a metal fabricator to cut out of some nice shiny steel
You could also try carbon fiber instead of steel
LEXUS IS200 - The most fun car to go sideways
Recently Browsing
7 Guest(s)
7 Guest(s)
Recently Browsing
7 Guest(s)
7 Guest(s)