Anyone after some of these?
Anyone after some of these?
20-05-2016, 12:03 PM
[COLOR="Gray"]December 2008: Crashed Lexus IS200 - Cat B Write Off
August 2009: Crashed Vauxhall Astra - Minor Damage DIY Repair
November 2009: Crashed Vauxhall Astra - Scratches To Bumper No Repair Required
February 2010: Other Party Crashed Into Astra - Extensive Damage To Rear -Settled With Third Party's Insurance
Anyone dare To Predict The Future?[/COLOR]
thanks for the info, will come in later in life, its easier then that glue silocone style i used to stick my side skirts on my old astra
[COLOR="Gray"]December 2008: Crashed Lexus IS200 - Cat B Write Off
August 2009: Crashed Vauxhall Astra - Minor Damage DIY Repair
November 2009: Crashed Vauxhall Astra - Scratches To Bumper No Repair Required
February 2010: Other Party Crashed Into Astra - Extensive Damage To Rear -Settled With Third Party's Insurance
Anyone dare To Predict The Future?[/COLOR]
20-05-2016, 12:04 PM
DJ Wozza £50 sounds a bargain do you need a fitting kit or not ?no mate all you need is the tape to stick the side skirt to the sill and the screws either x2 front wing and x1 on the rear arch.
this is how i've done mine and they are stuck solid!!!!:thumbup::thumbup:
![[Image: ormiedit1-2.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/ormiedit1-2.jpg)
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
DJ Wozza £50 sounds a bargain do you need a fitting kit or not ?no mate all you need is the tape to stick the side skirt to the sill and the screws either x2 front wing and x1 on the rear arch.
this is how i've done mine and they are stuck solid!!!!:thumbup::thumbup:
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
20-05-2016, 12:07 PM
i fitted the skirts on mine with it, they never moved and were a right sod to get off 
cared:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
23-05-2016, 12:47 AM
Lexusboy That is really cheap for the skirts normally around the £80 - £120 mark
I need some tape for my number plate but i not paying £28 for it.
Why do you need tape for your number plates ? I just used the number plate sticky pads from Halfords, they're pretty strong (and don't cost much).
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
23-05-2016, 12:47 AM #15Lexusboy That is really cheap for the skirts normally around the £80 - £120 mark
I need some tape for my number plate but i not paying £28 for it.
Why do you need tape for your number plates ? I just used the number plate sticky pads from Halfords, they're pretty strong (and don't cost much).
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
23-05-2016, 02:06 AM
Lexusboy Steve i have tried these and other double side tape.:thumbdown:
My number plate is curved around the car body so the two ends start to pull alway after a few weeks...
I show you what i mean on Saturday
Ah ok, if it's curved then I can see you'd need something pretty strong.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
23-05-2016, 02:06 AM #17Lexusboy Steve i have tried these and other double side tape.:thumbdown:
My number plate is curved around the car body so the two ends start to pull alway after a few weeks...
I show you what i mean on Saturday
Ah ok, if it's curved then I can see you'd need something pretty strong.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
23-05-2016, 04:59 AM
Lexusboy Steve i have tried these and other double side tape.:thumbdown:
My number plate is curved around the car body so the two ends start to pull alway after a few weeks...
I show you what i mean on Saturday
Velcro thats what i've used
comes handy in london :tongue_smilie:
Lexusboy Steve i have tried these and other double side tape.:thumbdown:
My number plate is curved around the car body so the two ends start to pull alway after a few weeks...
I show you what i mean on Saturday
Velcro thats what i've used
comes handy in london :tongue_smilie:
23-05-2016, 10:46 PM
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
23-05-2016, 10:46 PM #20Isn't the problem with the velcro that you still need to stick the velcro to the number plate and to the car ? So you'd have a similar problem if the glue isn't strong enough ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
Recently Browsing
4 Guest(s)
4 Guest(s)
Recently Browsing
4 Guest(s)
4 Guest(s)