New IS200 inlet manifold
New IS200 inlet manifold
06-11-2016, 01:59 PM
Almost Finished Well i picked my car up from SPC today :w00t: , under the bonnet is just fantastic now that Wayne has worked his magic , she is only half run in at the moment ,so she has only been mapped to .7 bar by Ike and Dave untill fully run in , but when i watched her on the rollers today she made 330 bhp :biggrin: , also i have never ever heard an engine as quite as this engine , it purrs , ive just got to put a couple more hundred miles on her then its back for the "Full Monty" map .:thumbup1::biggrin::thumbup::tongue_smilie:
If you consider the big number you had before was at 1.2 bar we are only around 40 HP away from that now at half the boost :thumbup1:
Glad you are happy with her Dave , Again thank.s to both mapper.s for their input and IKE Engineering for a lot of the developement that has gone into the entire Lexus project.s , Personally i think a lot of Question.s have been answered all part.s that supposedly could not be made have been made :thumbup1:
supratruck
06-11-2016, 01:59 PM #81Almost Finished Well i picked my car up from SPC today :w00t: , under the bonnet is just fantastic now that Wayne has worked his magic , she is only half run in at the moment ,so she has only been mapped to .7 bar by Ike and Dave untill fully run in , but when i watched her on the rollers today she made 330 bhp :biggrin: , also i have never ever heard an engine as quite as this engine , it purrs , ive just got to put a couple more hundred miles on her then its back for the "Full Monty" map .
If you consider the big number you had before was at 1.2 bar we are only around 40 HP away from that now at half the boost :thumbup1:
Glad you are happy with her Dave , Again thank.s to both mapper.s for their input and IKE Engineering for a lot of the developement that has gone into the entire Lexus project.s , Personally i think a lot of Question.s have been answered all part.s that supposedly could not be made have been made :thumbup1:
06-11-2016, 02:08 PM
Here is a small video by wobbly cam
Edited 18-12-2009, 11:46 PM by supratruck.
supratruck
06-11-2016, 02:08 PM #82http://www.youtube.com/watch?v=mBXiaFJ6i6Q
Here is a small video by wobbly cam
06-11-2016, 02:36 PM
supratruck http://www.youtube.com/watch?v=mBXiaFJ6i6Q
Here is a small video by wobbly cam
Fantastic sound . Awesome looks :thumbup:
Almost Finished
06-11-2016, 02:36 PM #83supratruck http://www.youtube.com/watch?v=mBXiaFJ6i6Q
Here is a small video by wobbly cam
Fantastic sound . Awesome looks :thumbup:
07-11-2016, 01:22 AM
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
07-11-2016, 01:22 AM #85So very very good.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
07-11-2016, 04:04 AM
Pistons
Rods
Oversized valves
Fabricated inlet manifold
Block girdle plate
High capacity sump
Reprofiled camshafts
Edited 19-12-2009, 01:48 PM by SPChorsham.com.
SPChorsham.com
07-11-2016, 04:04 AM #86This engine has the full catalogue of parts we do at the moment!!
Pistons
Rods
Oversized valves
Fabricated inlet manifold
Block girdle plate
High capacity sump
Reprofiled camshafts
07-11-2016, 04:22 AM
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
07-11-2016, 04:22 AM #87The plan is (I am reliably told) is to run it in with a relatively low tune, then crank it up once everything is settled in. It is going to be a monster.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
07-11-2016, 04:30 AM
SPChorsham.com This engine has the full catalogue of parts we do at the moment!!
Pistons
Rods
Oversized valves
Fabricated inlet manifold
Block girdle plate
High capacity sump
Reprofiled camshafts
And more
ported cyl head
Arp main stud bolts
Arp cylinder head bolts
550 cc injectors
HKS V Pro management
Uprated oil pump
Edited 19-12-2009, 02:26 PM by supratruck.
supratruck
07-11-2016, 04:30 AM #88SPChorsham.com This engine has the full catalogue of parts we do at the moment!!
Pistons
Rods
Oversized valves
Fabricated inlet manifold
Block girdle plate
High capacity sump
Reprofiled camshafts
And more
ported cyl head
Arp main stud bolts
Arp cylinder head bolts
550 cc injectors
HKS V Pro management
Uprated oil pump
07-11-2016, 04:33 AM
cared:
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
07-11-2016, 04:33 AM #89don't forget the wipe clean seat coverscared:
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
07-11-2016, 04:45 AM
2tongues don't forget the wipe clean seat covers
There is a box of Huggies Pull up's in the boot one size fit's all :wink:
supratruck
07-11-2016, 04:45 AM #902tongues don't forget the wipe clean seat covers
There is a box of Huggies Pull up's in the boot one size fit's all :wink:
Recently Browsing
2 Guest(s)
2 Guest(s)
Recently Browsing
2 Guest(s)
2 Guest(s)
Related Threads…
Replies 10
Views 837
Views 837
07-01-2017, 06:29 AM
Last Post bySparkystav
Last Post by