New IS200 inlet manifold
New IS200 inlet manifold
30-11-2016, 02:46 AM
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
30-11-2016, 02:46 AM #101Sounds great Dave :biggrin:
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
30-11-2016, 09:00 AM
Lexusboy Glad your happy Dave.
Just be carefull with the current weather.
Did you order your carbon bonnet?
Yep , me and Alam have orderd carbon bonnets , to be fitted by SPC in the next couple of weeks :biggrin:
Almost Finished
30-11-2016, 09:00 AM #102Lexusboy Glad your happy Dave.
Just be carefull with the current weather.
Did you order your carbon bonnet?
Yep , me and Alam have orderd carbon bonnets , to be fitted by SPC in the next couple of weeks :biggrin:
30-11-2016, 10:43 AM
We are also fitting Figs bonnets struts and fan washers.
[SIZE="1"]Lexus IS300 Navigator
Engine: ITG ProFilter, Joe-Z Intake Pipe, Custom HKS Super Drager Exhaust, TRD Oil & Rad Cap & Grounding Kit
Suspension: BC Racing Coilovers, Hotchkis ARB's, Chassis Braces & WIM Geometry
Wheels: 18" OZ Ultraleggera & Falken ZE912 Tyres
Styling: Seibon Carbon Fibre Bonnet, Figs Bonnet Struts, Sports Grill, Repositioned Horns & SS Dials
ICE: JVC KW-AVX720 HU, Hifonics ZXI 6410 Amp, MB Quart RUA 216 2-Way Components, StealthBoXz with Infinity 12" Sub & Reverse Camera[/SIZE]
alamkhan3980
30-11-2016, 10:43 AM #104The Seibon carbon fibre bonnets were ordered through Mad Motors pre xmas and took about week for them to recieve them into stock. The bonnets are being shipped to SPC for fitting in a couple weeks.
We are also fitting Figs bonnets struts and fan washers.
[SIZE="1"]Lexus IS300 Navigator
Engine: ITG ProFilter, Joe-Z Intake Pipe, Custom HKS Super Drager Exhaust, TRD Oil & Rad Cap & Grounding Kit
Suspension: BC Racing Coilovers, Hotchkis ARB's, Chassis Braces & WIM Geometry
Wheels: 18" OZ Ultraleggera & Falken ZE912 Tyres
Styling: Seibon Carbon Fibre Bonnet, Figs Bonnet Struts, Sports Grill, Repositioned Horns & SS Dials
ICE: JVC KW-AVX720 HU, Hifonics ZXI 6410 Amp, MB Quart RUA 216 2-Way Components, StealthBoXz with Infinity 12" Sub & Reverse Camera[/SIZE]
09-12-2016, 11:54 AM
alamkhan3980 The Seibon carbon fibre bonnets were ordered through Mad Motors pre xmas and took about week for them to recieve them into stock. The bonnets are being shipped to SPC for fitting in a couple weeks.
We are also fitting Figs bonnets struts and fan washers.
going to order mines soon aswell
[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]
alamkhan3980 The Seibon carbon fibre bonnets were ordered through Mad Motors pre xmas and took about week for them to recieve them into stock. The bonnets are being shipped to SPC for fitting in a couple weeks.
We are also fitting Figs bonnets struts and fan washers.
going to order mines soon aswell
[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]
07-02-2017, 12:34 PM
, i took my car for the final mapping to Ike Flack at SPC and all was going well untill we hit a fuel problem , although i have an uprated fuel pump 255 lph in the tank this is not enough , so i will need a swirl pot and a Bosch 044 fuel pump fitted in the boot A.S.A.P. Anyway she made at 1 BAR 380 BHP 310 FT/LB 7700 REVS :thumbup1: nice .
Almost Finished
07-02-2017, 12:34 PM #108Well for a moment last wednesday i was very nearly almost finished , i took my car for the final mapping to Ike Flack at SPC and all was going well untill we hit a fuel problem , although i have an uprated fuel pump 255 lph in the tank this is not enough , so i will need a swirl pot and a Bosch 044 fuel pump fitted in the boot A.S.A.P. Anyway she made at 1 BAR 380 BHP 310 FT/LB 7700 REVS :thumbup1: nice .
07-02-2017, 01:07 PM
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
07-02-2017, 01:07 PM #110Congratulations Dave ! :thumbup1:
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
Recently Browsing
3 Guest(s)
3 Guest(s)
Recently Browsing
3 Guest(s)
3 Guest(s)
Related Threads…
Replies 10
Views 878
Views 878
07-01-2017, 06:29 AM
Last Post bySparkystav
Last Post by