Few pictures of a stripped down TTE Superscharger.

Pages (3): 1 2 3 Next

rob
Senior Member

720

10-01-2017, 11:40 AM

This all started after hearing some strange sounds when driving slowly around the city - I would hear a grating sound, I thought it might be the Kompressor so after a bit of investigation I found that the bolts for the Kompressor drive were missing so the modified magnetic clutch plate drive was not driving which means no boost pressure... After a closer look I saw the drive bolts on the Kompressor pulley had sheared and I also found that the pulley bearing had some play so I decided to strip and replace all the bearings I could in the Kompressor

some photos for you....

Photo's removed by owners request, if anyone wonting to look at these photo's please send Rob a pm .... Gord

Edited 31-12-2010, 07:09 PM by GH.

rob

10-01-2017, 11:40 AM #1

dimis
Posting Freak

3,795

10-01-2017, 11:42 AM

Nice review Rob, do you have the part number or the dimensions of the oil seal?

LEXUS IS200 - The most fun car to go sideways

dimis

10-01-2017, 11:42 AM #2

Nice review Rob, do you have the part number or the dimensions of the oil seal?

LEXUS IS200 - The most fun car to go sideways

Asi
Posting Freak

2,510

10-01-2017, 11:42 AM

looking very nice. should have got cermaic coating would have helped?

[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]

Asi

10-01-2017, 11:42 AM #3

looking very nice. should have got cermaic coating would have helped?

[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]

rob
Senior Member

720

10-01-2017, 11:45 AM

dimis Nice review Rob, do you have the part number or the dimensions of the oil seal?

Sorry Dimis, i dont anymore, It was a common size and I had no problems finding it.. thats all i can really say.. But didnt you buy a new unit a while ago???

rob

10-01-2017, 11:45 AM #4

dimis Nice review Rob, do you have the part number or the dimensions of the oil seal?

Sorry Dimis, i dont anymore, It was a common size and I had no problems finding it.. thats all i can really say.. But didnt you buy a new unit a while ago???

dimis
Posting Freak

3,795

10-01-2017, 11:49 AM

Yes I did, i was just curious bucause i never managed to find this part

LEXUS IS200 - The most fun car to go sideways

dimis

10-01-2017, 11:49 AM #5

Yes I did, i was just curious bucause i never managed to find this part

LEXUS IS200 - The most fun car to go sideways

rob
Senior Member

720

10-01-2017, 11:50 AM

no probs..... i will take it down at some stage and update it as i found some new pics which i have to upload at some stage.

i have taken it down from LOC to do the same and then will re post it.

rob

10-01-2017, 11:50 AM #6

no probs..... i will take it down at some stage and update it as i found some new pics which i have to upload at some stage.

i have taken it down from LOC to do the same and then will re post it.

rob
Senior Member

720

10-01-2017, 11:51 AM

dimis Yes I did, i was just curious bucause i never managed to find this part

i looked everywhere and couldnt find it either - in the end i removed the original and just measured it - i paid less than 1 euro it i remember

rob

10-01-2017, 11:51 AM #7

dimis Yes I did, i was just curious bucause i never managed to find this part

i looked everywhere and couldnt find it either - in the end i removed the original and just measured it - i paid less than 1 euro it i remember

dimis
Posting Freak

3,795

10-01-2017, 11:53 AM

I was going to do the same, but i found and bought the new SC so i never ended up dismantling the sc.

LEXUS IS200 - The most fun car to go sideways

dimis

10-01-2017, 11:53 AM #8

I was going to do the same, but i found and bought the new SC so i never ended up dismantling the sc.

LEXUS IS200 - The most fun car to go sideways

dimis
Posting Freak

3,795

10-01-2017, 12:14 PM

You can get the needle bearings from ebay.

http://cgi.ebay.com/ebaymotors/Eaton-M62...ccessories

These are the ones i bought to service my first eaton sc.

LEXUS IS200 - The most fun car to go sideways

dimis

10-01-2017, 12:14 PM #9

You can get the needle bearings from ebay.

http://cgi.ebay.com/ebaymotors/Eaton-M62...ccessories

These are the ones i bought to service my first eaton sc.

LEXUS IS200 - The most fun car to go sideways

rob
Senior Member

720

10-01-2017, 12:16 PM

#10

the rear bearings are easy to get there is a guy on US ebay drassolic or something like that is his user name.

FORGET the front bearings as they are a really odd sie and the seals are even stranger.

The main bearing took a bit of finding but i found alternatives and its used in aircon pulley clutches, but they can be found easier now than before..

EDIT: Dimis beat me to it.

rob

10-01-2017, 12:16 PM #10

Pages (3): 1 2 3 Next

Recently Browsing
2 Guest(s)