My New IS V8 Build
My New IS V8 Build
[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]
went to the garage today and i took pictures of the engine bay but could not get pictures of the boot becuase we are awaiting for new fuel lines so the mechanic took the spoiler off and filled the holes and sanded the rust and put primer on it so the rust stays away. got pics of that will post up later tonight
[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]
Asi The turbo is going to be in the same place as it would require a lot of work. From what I know the turbo was overheating because it was running lean and needs a remap and it would be fine. I don't think it was close to the manifold. Would get pics up tonight
I see, no worries sounds good mate look forward to seeing the pics :thumbup1:
russelllinn
14-01-2017, 12:52 PM #133Asi The turbo is going to be in the same place as it would require a lot of work. From what I know the turbo was overheating because it was running lean and needs a remap and it would be fine. I don't think it was close to the manifold. Would get pics up tonight
I see, no worries sounds good mate look forward to seeing the pics :thumbup1:
![[Image: DSC00003.jpg]](http://i166.photobucket.com/albums/u95/asi-ebb/DSC00003.jpg)
![[Image: DSC00005.jpg]](http://i166.photobucket.com/albums/u95/asi-ebb/DSC00005.jpg)
![[Image: DSC00006.jpg]](http://i166.photobucket.com/albums/u95/asi-ebb/DSC00006.jpg)
![[Image: DSC00007.jpg]](http://i166.photobucket.com/albums/u95/asi-ebb/DSC00007.jpg)
Unregistered
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
15-01-2017, 12:27 PM #137What's with the boot ? Is that testing out for the respray ?
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
![[Image: ormiedit1-2.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/ormiedit1-2.jpg)
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
he removed the rear spoiler and had to sort rust under their too.......
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]
As Ormi said. when the spoiler was removed the mechanic (who owned a body shop back in the days but times are hard!) then sanded the rust down as didn't want it to get worse and just put primer on it to keep the rust away just in case
[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]
awaiting for a new fuel line so for the time being the coilovers are going on. also New HT leads have been ordered so they should be a week or so. Also spoke to Thor racing today and the way the work is going on the gearbox i will have it by friday so once the gearbox here and fuel line fitted then the engine going in so they manifold could be made.
[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]
Didnt get a chance to go to the garage today as was busy at work. i am deffo going tommorow around 2 so would get pics then.
awaiting for a new fuel line so for the time being the coilovers are going on. also New HT leads have been ordered so they should be a week or so. Also spoke to Thor racing today and the way the work is going on the gearbox i will have it by friday so once the gearbox here and fuel line fitted then the engine going in so they manifold could be made.
[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]
3 Guest(s)
3 Guest(s)
Views 897
Last Post by
Views 1,469
Last Post by
Views 5,961
Last Post by
Views 3,107
Last Post by
Views 1,926
Last Post by
Views 6,362
Last Post by
Views 698
Last Post by
Views 859
Last Post by
Views 1,346
Last Post by