JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza Boot release not working :(

Boot release not working :(

Boot release not working :(

Pages (2): 1 2 Next
Dan_Turism0
Posting Freak
2,825
18-01-2017, 06:08 AM
#1
Ok guys suddenly my boot release has stopped working from the lever in the car, i can open the boot by key but the lever doesn't do anything.
Is the lever on a cable release? or any ideas?

My Garage
Supra Build Thread

' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.
Dan_Turism0
18-01-2017, 06:08 AM #1

Ok guys suddenly my boot release has stopped working from the lever in the car, i can open the boot by key but the lever doesn't do anything.
Is the lever on a cable release? or any ideas?


My Garage
Supra Build Thread

' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.

Bandit
Posting Freak
6,464
18-01-2017, 06:12 AM
#2
Dan have you turned the lock round on the boot? if its in a certain position it wont work with the interior release? its part of the valet setup on the car itself?

Lexus IS200 Sport Navigator (Now being stripped again) :blink:


Now Don't Forget The REP!!!
Bandit
18-01-2017, 06:12 AM #2

Dan have you turned the lock round on the boot? if its in a certain position it wont work with the interior release? its part of the valet setup on the car itself?


Lexus IS200 Sport Navigator (Now being stripped again) :blink:


Now Don't Forget The REP!!!

aaronabbott
Posting Freak
804
18-01-2017, 06:13 AM
#3
Bandit Dan have you turned the lock round on the boot? if its in a certain position it wont work with the interior release? its part of the valet setup on the car itself?

never knew that

ICE-JVC kw-avx820,JL 300/4,JL 500/1,JL HO210R-W3V2,mb quart rua-216 components,2x veba headrest screens
TRD front lip,hid 8000k,ik 20's,front armrest,18'' black rims with chrome polished lip,k&n filter,hks superdragger,chrome a/c rings,rear view camera,bc coilovers
aaronabbott
18-01-2017, 06:13 AM #3

Bandit Dan have you turned the lock round on the boot? if its in a certain position it wont work with the interior release? its part of the valet setup on the car itself?

never knew that


ICE-JVC kw-avx820,JL 300/4,JL 500/1,JL HO210R-W3V2,mb quart rua-216 components,2x veba headrest screens
TRD front lip,hid 8000k,ik 20's,front armrest,18'' black rims with chrome polished lip,k&n filter,hks superdragger,chrome a/c rings,rear view camera,bc coilovers

Sparkystav
Administrator
14,683
18-01-2017, 06:16 AM
#4
agree with Bandit you'll have locked the boot

OutlawJapClub Admin Team
Sparkystav
18-01-2017, 06:16 AM #4

agree with Bandit you'll have locked the boot


OutlawJapClub Admin Team

Bandit
Posting Freak
6,464
18-01-2017, 06:17 AM
#5
aaronabbott never knew that

Yes mate, if you turn the lock round to a certain position it wont open with a 2 button key (iirc) same as the glove box, you can lock it with the 3 button but the 2 button one wont unlock it or something like that? stops people going in your boot if its in for a service etc :thumbup:

Lexus IS200 Sport Navigator (Now being stripped again) :blink:


Now Don't Forget The REP!!!
Bandit
18-01-2017, 06:17 AM #5

aaronabbott never knew that

Yes mate, if you turn the lock round to a certain position it wont open with a 2 button key (iirc) same as the glove box, you can lock it with the 3 button but the 2 button one wont unlock it or something like that? stops people going in your boot if its in for a service etc :thumbup:


Lexus IS200 Sport Navigator (Now being stripped again) :blink:


Now Don't Forget The REP!!!

aaronabbott
Posting Freak
804
18-01-2017, 06:18 AM
#6
Bandit Yes mate, if you turn the lock round to a certain position it wont open with a 2 button key (iirc) same as the glove box, you can lock it with the 3 button but the 2 button one wont unlock it or something like that? stops people going in your boot if its in for a service etc :thumbup:


or keep people from getting outWink

ICE-JVC kw-avx820,JL 300/4,JL 500/1,JL HO210R-W3V2,mb quart rua-216 components,2x veba headrest screens
TRD front lip,hid 8000k,ik 20's,front armrest,18'' black rims with chrome polished lip,k&n filter,hks superdragger,chrome a/c rings,rear view camera,bc coilovers
aaronabbott
18-01-2017, 06:18 AM #6

Bandit Yes mate, if you turn the lock round to a certain position it wont open with a 2 button key (iirc) same as the glove box, you can lock it with the 3 button but the 2 button one wont unlock it or something like that? stops people going in your boot if its in for a service etc :thumbup:


or keep people from getting outWink


ICE-JVC kw-avx820,JL 300/4,JL 500/1,JL HO210R-W3V2,mb quart rua-216 components,2x veba headrest screens
TRD front lip,hid 8000k,ik 20's,front armrest,18'' black rims with chrome polished lip,k&n filter,hks superdragger,chrome a/c rings,rear view camera,bc coilovers

Dan_Turism0
Posting Freak
2,825
18-01-2017, 06:26 AM
#7
ahh I shall have a look at this chris Big Grin I have 2 3button keys so not tried with a 2 button, shall report back later

My Garage
Supra Build Thread

' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.
Dan_Turism0
18-01-2017, 06:26 AM #7

ahh I shall have a look at this chris Big Grin I have 2 3button keys so not tried with a 2 button, shall report back later


My Garage
Supra Build Thread

' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.

FirebirdPhil
Posting Freak
7,101
18-01-2017, 06:26 AM
#8
My cable slipped on the inside of the boot, causing the release to stop working (interior handle went floppy). It is worth removing the carpet cover and taking a look, its black and on the right had side as your looking at the back of the car. Solved with 2 tie wraps.

I used a claw hammer (the claw bit) to remove the plastic retainers of the carpet.

"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
18-01-2017, 06:26 AM #8

My cable slipped on the inside of the boot, causing the release to stop working (interior handle went floppy). It is worth removing the carpet cover and taking a look, its black and on the right had side as your looking at the back of the car. Solved with 2 tie wraps.

I used a claw hammer (the claw bit) to remove the plastic retainers of the carpet.


"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"

Saraj
Posting Freak
2,791
18-01-2017, 06:27 AM
#9
aaronabbott or keep people from getting outWink

all part of the image of Lexus ! Big Grin

No wonder Spooks have Lexuses

[COLOR="Gray"]December 2008: Crashed Lexus IS200 - Cat B Write Off
August 2009: Crashed Vauxhall Astra - Minor Damage DIY Repair
November 2009: Crashed Vauxhall Astra - Scratches To Bumper No Repair Required
February 2010: Other Party Crashed Into Astra - Extensive Damage To Rear -Settled With Third Party's Insurance
Anyone dare To Predict The Future?[/COLOR]
Saraj
18-01-2017, 06:27 AM #9

aaronabbott or keep people from getting outWink

all part of the image of Lexus ! Big Grin

No wonder Spooks have Lexuses


[COLOR="Gray"]December 2008: Crashed Lexus IS200 - Cat B Write Off
August 2009: Crashed Vauxhall Astra - Minor Damage DIY Repair
November 2009: Crashed Vauxhall Astra - Scratches To Bumper No Repair Required
February 2010: Other Party Crashed Into Astra - Extensive Damage To Rear -Settled With Third Party's Insurance
Anyone dare To Predict The Future?[/COLOR]

Dan_Turism0
Posting Freak
2,825
18-01-2017, 06:31 AM
#10
2tongues My cable slipped on the inside of the boot, causing the release to stop working (interior handle went floppy). It is worth removing the carpet cover and taking a look, its black and on the right had side as your looking at the back of the car. Solved with 2 tie wraps.

I used a claw hammer (the claw bit) to remove the plastic retainers of the carpet.

can you remember if yours worked via remote Phil?

My Garage
Supra Build Thread

' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.
Dan_Turism0
18-01-2017, 06:31 AM #10

2tongues My cable slipped on the inside of the boot, causing the release to stop working (interior handle went floppy). It is worth removing the carpet cover and taking a look, its black and on the right had side as your looking at the back of the car. Solved with 2 tie wraps.

I used a claw hammer (the claw bit) to remove the plastic retainers of the carpet.

can you remember if yours worked via remote Phil?


My Garage
Supra Build Thread

' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.

Pages (2): 1 2 Next
Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 4
Views 355
27-03-2022, 11:16 PM
Last Post by Sparkystav
Replies 2
Views 192
23-03-2020, 11:52 AM
Last Post by Sparkystav
Replies 6
Views 354
28-06-2019, 10:43 AM
Last Post by purplewitch
Replies 11
Views 666
28-09-2018, 11:44 AM
Last Post by rob
Replies 9
Views 522
23-05-2018, 10:09 AM
Last Post by Dinho
Replies 10
Views 711
01-04-2018, 10:32 AM
Last Post by jasons
Replies 9
Views 501
18-03-2018, 07:56 AM
Last Post by danielson
Replies 15
Views 1,054
13-01-2018, 04:17 PM
Last Post by hawk77ojc
Replies 43
Views 1,818
21-06-2017, 02:34 AM
Last Post by Fozzy
Replies 8
Views 375
06-05-2017, 01:04 PM
Last Post by parthiban