Subaru Impreza WR1

JapCarForum Club Sponsor Invisible Touch Detailing Subaru Impreza WR1

Subaru Impreza WR1

Pages (2): 1 2 Next

Invisible Touch Detailing
Senior Member

423

24-02-2017, 11:39 AM

Invisible Touch Detailing

24-02-2017, 11:39 AM #1

Hi,

A Stage 1 Paint Correction and Engine Bay treatment on this lovely WR1.

These were the photos of the vehicle on arrival. Lots of baked on brake dust and the paintwork in typical condition for this time of year.

[Image: P1040451.jpg]

[Image: P1040452.jpg]

[Image: P1040453.jpg]

[Image: P1040454.jpg]

[Image: P1040455.jpg]

[Image: P1040456.jpg]

[Image: P1040457.jpg]

[Image: P1040458.jpg]

[Image: P1040459.jpg]

[Image: P1040460.jpg]

[Image: P1040461.jpg]

[Image: P1040462.jpg]

[Image: P1040463.jpg]

[Image: P1040464.jpg]

[Image: P1040465.jpg]

[Image: P1040466.jpg]

[Image: P1040467.jpg]

Invisible Touch Detailing
Senior Member

423

24-02-2017, 11:40 AM

The engine bay on arrival.

[Image: P1040468.jpg]

I was asked by the client to remove the WRX, Impreza and STI badges from the boot lid and refit a chrome WR1 badge which he supplied.

I softened the badges with hot water and removed them using fishing line. Leaving this.

[Image: P1040472.jpg]

As the sun came out briefly, 1 last picture and current reflection shot before the wash process.

[Image: P1040474.jpg]

The vehicle was jet washed down and then snow foamed to loosen any dirt before washing with a wash mitt, to avoid inflicting any further paint defects.

[Image: P1040477.jpg]

The tyres, arches, door and boot shuts were sprayed with Meguiars APC and left to dwell before being agitated with brushes.

[Image: P1040479.jpg]

The wheels were left to soak in Bilberry for 5 mins before being jet washed and then washed with a wash mitt and wheel brush in a hot, Shampoo Plus solution. Some areas of baked on brake dust were also clayed where required.

[Image: P1040480.jpg]

Moving onto the engine bay.

[Image: P1040486.jpg]

Invisible Touch Detailing

24-02-2017, 11:40 AM #2

The engine bay on arrival.

[Image: P1040468.jpg]

[Image: P1040469.jpg]

[Image: P1040470.jpg]

[Image: P1040471.jpg]

I was asked by the client to remove the WRX, Impreza and STI badges from the boot lid and refit a chrome WR1 badge which he supplied.

I softened the badges with hot water and removed them using fishing line. Leaving this.

[Image: P1040472.jpg]

[Image: P1040473.jpg]

As the sun came out briefly, 1 last picture and current reflection shot before the wash process.

[Image: P1040474.jpg]

[Image: P1040475.jpg]

[Image: P1040476.jpg]

The vehicle was jet washed down and then snow foamed to loosen any dirt before washing with a wash mitt, to avoid inflicting any further paint defects.

[Image: P1040477.jpg]

[Image: P1040478.jpg]

The tyres, arches, door and boot shuts were sprayed with Meguiars APC and left to dwell before being agitated with brushes.

[Image: P1040479.jpg]

[Image: P1040482.jpg]

The wheels were left to soak in Bilberry for 5 mins before being jet washed and then washed with a wash mitt and wheel brush in a hot, Shampoo Plus solution. Some areas of baked on brake dust were also clayed where required.

[Image: P1040480.jpg]

[Image: P1040481.jpg]

[Image: P1040483.jpg]

[Image: P1040484.jpg]

[Image: P1040485.jpg]

Moving onto the engine bay.

[Image: P1040486.jpg]

[Image: P1040487.jpg]

Invisible Touch Detailing
Senior Member

423

24-02-2017, 11:41 AM

I covered any major electrical parts with clingfilm. It was then washed with a hot Shampoo Plus solution, rinsed and then left to dwell for 5 mins in Meguiars APC.

[Image: P1040488.jpg]

It was then scrubbed using a toothbrush.

[Image: P1040493.jpg]

And finally, rinsed off.

[Image: P1040494.jpg]

The vehicle was then washed using the 2 bucket method and Shampoo Plus.

[Image: P1040496.jpg]

It was then tucked away for the night.

[Image: P1040499.jpg]

Next morning, i had to stop and say good morning to the littl'un on the way past Smile

The vehicle was dusted down using Meguiars Last Touch.

[Image: P1040502.jpg]

As the sun was out it was showing a few paint defects in the light.

[Image: P1040504.jpg]

Now onto the claying. The front wing.

[Image: P1040508.jpg]

The lower halfs of the doors, as expected, were terrible and shows just how important the claying procedure is when looking for an exquisite finish.

[Image: P1040511.jpg]

The side skirts also not great. Small chip in the clearcoat noted before machine polishing.

[Image: P1040512.jpg]

Invisible Touch Detailing

24-02-2017, 11:41 AM #3

I covered any major electrical parts with clingfilm. It was then washed with a hot Shampoo Plus solution, rinsed and then left to dwell for 5 mins in Meguiars APC.

[Image: P1040488.jpg]

[Image: P1040489.jpg]

[Image: P1040490.jpg]

[Image: P1040491.jpg]

[Image: P1040492.jpg]

It was then scrubbed using a toothbrush.

[Image: P1040493.jpg]

And finally, rinsed off.

[Image: P1040494.jpg]

The vehicle was then washed using the 2 bucket method and Shampoo Plus.

[Image: P1040496.jpg]

[Image: P1040497.jpg]

[Image: P1040498.jpg]

It was then tucked away for the night.

[Image: P1040499.jpg]

Next morning, i had to stop and say good morning to the littl'un on the way past Smile

[Image: P1040501.jpg]

The vehicle was dusted down using Meguiars Last Touch.

[Image: P1040502.jpg]

As the sun was out it was showing a few paint defects in the light.

[Image: P1040504.jpg]

[Image: P1040505.jpg]

[Image: P1040507.jpg]

Now onto the claying. The front wing.

[Image: P1040508.jpg]

The lower halfs of the doors, as expected, were terrible and shows just how important the claying procedure is when looking for an exquisite finish.

[Image: P1040511.jpg]

The side skirts also not great. Small chip in the clearcoat noted before machine polishing.

[Image: P1040512.jpg]

Invisible Touch Detailing
Senior Member

423

24-02-2017, 11:41 AM

The lights were also clayed.

[Image: P1040513.jpg]

It was then taken outside and washed again using the 2 bucket method.

[Image: P1040515.jpg]

The vehicle was then taped up ready for machine polishing, including any stickers. The side repeaters were also removed to aid the process.

[Image: P1040527.jpg]

Under the halogen lights the paint condition was now much clearer to see.

[Image: P1040534.jpg]

I used the Makita rotary, Menzerna 106FA and a 3M 150mm Polishing Pad, with 80mm spot pads for tighter areas. Front passenger wing corrected.

[Image: P1040536.jpg]

Invisible Touch Detailing

24-02-2017, 11:41 AM #4

The lights were also clayed.

[Image: P1040513.jpg]

It was then taken outside and washed again using the 2 bucket method.

[Image: P1040515.jpg]

[Image: P1040516.jpg]

[Image: P1040517.jpg]

[Image: P1040518.jpg]

[Image: P1040519.jpg]

[Image: P1040521.jpg]

[Image: P1040523.jpg]

[Image: P1040524.jpg]

[Image: P1040525.jpg]

The vehicle was then taped up ready for machine polishing, including any stickers. The side repeaters were also removed to aid the process.

[Image: P1040527.jpg]

[Image: P1040528.jpg]

[Image: P1040529.jpg]

[Image: P1040530.jpg]

Under the halogen lights the paint condition was now much clearer to see.

[Image: P1040534.jpg]

[Image: P1040535.jpg]

I used the Makita rotary, Menzerna 106FA and a 3M 150mm Polishing Pad, with 80mm spot pads for tighter areas. Front passenger wing corrected.

[Image: P1040536.jpg]

[Image: P1040540.jpg]

[Image: P1040542.jpg]

Invisible Touch Detailing
Senior Member

423

24-02-2017, 11:42 AM

Bonnet corrected.

[Image: P1040532.jpg]

The vehicle was then dusted down using Menzerna Top Inspection to remove any polishing oils.

[Image: P1040560.jpg]

Dodo Juice Lime Prime lite was the chosen glaze / pre wax cleanser. This was applied by hand per panel and buffed straight off.

[Image: P1040561.jpg]

Aerospace 303 was applied to the mud flaps as well as the plastics and rubbers in the engine bay.

[Image: P1040562.jpg]

2 Coats of Meguiars Endurance Tyre Gel was applied to the tyres.

[Image: P1040569.jpg]

The exhaust was polished using Meguiars NXT Metal Polish.

[Image: P1040570.jpg]

The wheels were treated with 2 coats of Poorboys Wheel Sealant.

[Image: P1040571.jpg]

Exterior plastics and door rubbers were treated with Autoglym Bumper Care.

[Image: P1040573.jpg]

Due to the time of year, the chosen wax was Collinite 476s. Its lovely to use, produces fantastic results and has an even better durability, perfect.

[Image: P1040568.jpg]

Lastly i fitted the 3 chrome badges to the boot lid. Here are the final pics.

[Image: P1040575.jpg]

Invisible Touch Detailing

24-02-2017, 11:42 AM #5

Bonnet corrected.

[Image: P1040532.jpg]

[Image: P1040538.jpg]

[Image: P1040548.jpg]

The vehicle was then dusted down using Menzerna Top Inspection to remove any polishing oils.

[Image: P1040560.jpg]

[Image: P1040555.jpg]

[Image: P1040558.jpg]

Dodo Juice Lime Prime lite was the chosen glaze / pre wax cleanser. This was applied by hand per panel and buffed straight off.

[Image: P1040561.jpg]

Aerospace 303 was applied to the mud flaps as well as the plastics and rubbers in the engine bay.

[Image: P1040562.jpg]

[Image: P1040563.jpg]

[Image: P1040565.jpg]

[Image: P1040566.jpg]

2 Coats of Meguiars Endurance Tyre Gel was applied to the tyres.

[Image: P1040569.jpg]

The exhaust was polished using Meguiars NXT Metal Polish.

[Image: P1040570.jpg]

The wheels were treated with 2 coats of Poorboys Wheel Sealant.

[Image: P1040571.jpg]

Exterior plastics and door rubbers were treated with Autoglym Bumper Care.

[Image: P1040573.jpg]

Due to the time of year, the chosen wax was Collinite 476s. Its lovely to use, produces fantastic results and has an even better durability, perfect.

[Image: P1040568.jpg]

Lastly i fitted the 3 chrome badges to the boot lid. Here are the final pics.

[Image: P1040575.jpg]

[Image: P1040576.jpg]

[Image: P1040580.jpg]

[Image: P1040581.jpg]

Invisible Touch Detailing
Senior Member

423

24-02-2017, 11:42 AM

And finally, the Invisible Touch Detailing Service Book was prepared for the client. This contains a record of the processes carried out.

[Image: P1040603.jpg]

Overall, a thoroughly enjoyable vehicle to work on although it could have been warmer at times Smile

Christian

Invisible Touch Detailing

24-02-2017, 11:42 AM #6

[Image: P1040583.jpg]

[Image: P1040585.jpg]

[Image: P1040586.jpg]

[Image: P1040590.jpg]

[Image: P1040592.jpg]

[Image: P1040594.jpg]

[Image: P1040596.jpg]

[Image: P1040598.jpg]

[Image: P1040600.jpg]

[Image: P1040601.jpg]

And finally, the Invisible Touch Detailing Service Book was prepared for the client. This contains a record of the processes carried out.

[Image: P1040603.jpg]

[Image: P1040604.jpg]

Overall, a thoroughly enjoyable vehicle to work on although it could have been warmer at times Smile

Christian

Sparkystav
Administrator

14,683

24-02-2017, 11:55 AM

looks good mate,

see a car thats not an exotic type (like the GT3 and csl) makes me want to get mine done

Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.

OutlawJapClub Admin Team

Sparkystav

24-02-2017, 11:55 AM #7

looks good mate,

see a car thats not an exotic type (like the GT3 and csl) makes me want to get mine done

Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.

OutlawJapClub Admin Team

Bandit
Posting Freak

6,464

24-02-2017, 01:38 PM

Again mate, stunning finish :thumbup1:

Lexus IS200 Sport Navigator (Now being stripped again) :blink:

Now Don't Forget The REP!!!

Bandit

24-02-2017, 01:38 PM #8

Again mate, stunning finish :thumbup1:

Lexus IS200 Sport Navigator (Now being stripped again) :blink:

Now Don't Forget The REP!!!

Asi
Posting Freak

2,510

24-02-2017, 04:15 PM

nice stuff mate.

[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]

Asi

24-02-2017, 04:15 PM #9

nice stuff mate.

[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]

Lexusboy
Posting Freak

9,267

25-02-2017, 05:53 AM

#10

That is simply stunning work, when i saw the first picture i thought to myself this is not a great colour to detail, but was i wrong its looks great.

Love the way the badges came off without damaging the paint work.

Lexusboy

25-02-2017, 05:53 AM #10

Pages (2): 1 2 Next

Recently Browsing
2 Guest(s)

Related Threads…

Impreza WR1
by Invisible Touch Detailing

Replies 15
Views 800

01-03-2018, 10:52 AM
Last Post by Lexuspat