JapCarForum Trade Area Selling Stainless Dial Conversions

Stainless Dial Conversions

Stainless Dial Conversions

Pages (15): Previous 16 7 8 9 1015 Next  
DaveEdin
Posting Freak
5,657
26-02-2017, 01:07 PM
#71
Dials arrived just fine Jason,thanks very muchly...

I'll be messing about with the cluster tomorrow then! Big Grin
DaveEdin
26-02-2017, 01:07 PM #71

Dials arrived just fine Jason,thanks very muchly...

I'll be messing about with the cluster tomorrow then! Big Grin

is300_dino
Posting Freak
3,556
26-02-2017, 01:11 PM
#72
have fun and be careful not to scratch your needles
is300_dino
26-02-2017, 01:11 PM #72

have fun and be careful not to scratch your needles

DaveEdin
Posting Freak
5,657
26-02-2017, 01:14 PM
#73
I'm terrified Confusedcared:

Currently wondering if I can bribe Ormi to pop by my place and do it for me..... :lol:
DaveEdin
26-02-2017, 01:14 PM #73

I'm terrified Confusedcared:

Currently wondering if I can bribe Ormi to pop by my place and do it for me..... :lol:

P.Lindblom
Posting Freak
821
26-02-2017, 01:19 PM
#74
Demon Here's Patrik's pics.............. Big Grin

[Image: dsc2401fixframerj4.jpg]

[Image: dsc2451fixframefe1.jpg]

Jason Big Grin
Cheers, mate. I was about to post my pics but you beat me to it :biggrin:

Here's another picture:
[Image: dsc8007fixframe.jpg]

Do you think I should start a group buy over at the Swedish Lexus forums, mate?
P.Lindblom
26-02-2017, 01:19 PM #74

Demon Here's Patrik's pics.............. Big Grin

[Image: dsc2401fixframerj4.jpg]

[Image: dsc2451fixframefe1.jpg]

Jason Big Grin
Cheers, mate. I was about to post my pics but you beat me to it :biggrin:

Here's another picture:
[Image: dsc8007fixframe.jpg]

Do you think I should start a group buy over at the Swedish Lexus forums, mate?

SHAHZ
Posting Freak
2,142
26-02-2017, 01:20 PM
#75
Demon To be honest a lot of people are not sure and for some reason i usually get alot of interest after meets when people see them up close. The pictures don't do them justice, in fact i have Patrik's pictures somewhere, they look the best................give me a minute or so.Smile

Cheers mate they do look quite good in that angled picture!

Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
SHAHZ
26-02-2017, 01:20 PM #75

Demon To be honest a lot of people are not sure and for some reason i usually get alot of interest after meets when people see them up close. The pictures don't do them justice, in fact i have Patrik's pictures somewhere, they look the best................give me a minute or so.Smile

Cheers mate they do look quite good in that angled picture!


Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R

is300_dino
Posting Freak
3,556
26-02-2017, 01:21 PM
#76
just make sure you wrap them in thin paper and go round a few times if the paper is too thick it makes it abit trickier but wouldn't trust a single wrap round just in case it catches and slices. but im sure ormi knows this already Smile
is300_dino
26-02-2017, 01:21 PM #76

just make sure you wrap them in thin paper and go round a few times if the paper is too thick it makes it abit trickier but wouldn't trust a single wrap round just in case it catches and slices. but im sure ormi knows this already Smile

Moley
Posting Freak
6,230
26-02-2017, 11:45 PM
#77
is300_dino just make sure you wrap them in thin paper and go round a few times if the paper is too thick it makes it abit trickier but wouldn't trust a single wrap round just in case it catches and slices. but im sure ormi knows this already Smile

Why not just pull the needles off, Jason replaced my needles for me because they were damaged(even though I did not see anything wrong with them :blushingSmile I am sure you could do it this way, but you could ask Jason just to make sure !!!!!!!!!!!!!!

Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Moley
26-02-2017, 11:45 PM #77

is300_dino just make sure you wrap them in thin paper and go round a few times if the paper is too thick it makes it abit trickier but wouldn't trust a single wrap round just in case it catches and slices. but im sure ormi knows this already Smile

Why not just pull the needles off, Jason replaced my needles for me because they were damaged(even though I did not see anything wrong with them :blushingSmile I am sure you could do it this way, but you could ask Jason just to make sure !!!!!!!!!!!!!!


Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice

is300_dino
Posting Freak
3,556
27-02-2017, 12:08 AM
#78
Moley Why not just pull the needles off, Jason replaced my needles for me because they were damaged(even though I did not see anything wrong with them :blushingSmile I am sure you could do it this way, but you could ask Jason just to make sure !!!!!!!!!!!!!!

not every one has replacement needles to hand mate
is300_dino
27-02-2017, 12:08 AM #78

Moley Why not just pull the needles off, Jason replaced my needles for me because they were damaged(even though I did not see anything wrong with them :blushingSmile I am sure you could do it this way, but you could ask Jason just to make sure !!!!!!!!!!!!!!

not every one has replacement needles to hand mate

Dark Samurai
Posting Freak
4,957
27-02-2017, 12:14 AM
#79
dont know mate, sounds stupid but lexus may still do them, then ebay may have some, plus scratching the red bit off means the needle goes white? therefore making it look modern which i like.

Lexus IS300 Sportcross in Platinum Ice.
Click here for garage.

PSN ID: O3107 
Dark Samurai
27-02-2017, 12:14 AM #79

dont know mate, sounds stupid but lexus may still do them, then ebay may have some, plus scratching the red bit off means the needle goes white? therefore making it look modern which i like.


Lexus IS300 Sportcross in Platinum Ice.
Click here for garage.

PSN ID: O3107 

Moley
Posting Freak
6,230
27-02-2017, 12:18 AM
#80
is300_dino not every one has replacement needles to hand mate

What I meant is pull off your needles fit the dials then put your original ones back on :Fish::Fish:

Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Moley
27-02-2017, 12:18 AM #80

is300_dino not every one has replacement needles to hand mate

What I meant is pull off your needles fit the dials then put your original ones back on :Fish::Fish:


Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice

Pages (15): Previous 16 7 8 9 1015 Next  
Recently Browsing
 2 Guest(s)
Recently Browsing
 2 Guest(s)
Related Threads…
Replies 0
Views 124
21-05-2022, 06:39 AM
Last Post by DaveEdin
Replies 3
Views 180
19-06-2021, 12:28 PM
Last Post by Rabster
Replies 110
Views 5,385
05-05-2019, 10:49 PM
Last Post by gazzi123
Replies 13
Views 1,402
10-04-2019, 11:58 AM
Last Post by jay_russell
Replies 13
Views 1,023
24-07-2018, 12:06 AM
Last Post by Fry-Up
Replies 353
Views 12,146
18-04-2017, 12:20 PM
Last Post by SHAHZ