the car i said i would keep standard.........
the car i said i would keep standard.........
28-02-2017, 03:02 AM
ormi cheeky buggers :lol: sats a 4 hour day i made 9 hours.... i start at 8.30....went to work at 7...... started polishing then and just worked on my car when i had a spare min... and left work at 12.45..with a very shiney car....:w00t:
From 7 to 12.45 is only 5 and 3/4 hours not 9
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
ormi cheeky buggers :lol: sats a 4 hour day i made 9 hours.... i start at 8.30....went to work at 7...... started polishing then and just worked on my car when i had a spare min... and left work at 12.45..with a very shiney car....:w00t:
From 7 to 12.45 is only 5 and 3/4 hours not 9
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
28-02-2017, 03:07 AM
eeeemmmmm thats about it.
yes moley but i clock in at 8 and clock out at 12.4 hours. i dont work on customers cars before 8 or after 12.(4 hours)
what i ment was in a 4 hour working day i made 9 hours ie if you get 2 hours for a service and you can do it in 1 then you can do 4 two hour services in 4 hours their for making 8 hours in a 4 hour day...time saved bonus...ie i'm good and fast at what i do..lol
Edited 11-04-2010, 12:46 PM by ormi.
![[Image: ormiedit1-2.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/ormiedit1-2.jpg)
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
em coilovers for a low vip look(getting this month) some green brake hoses,poss a short shift kit and poss some chassi bracing front and rear...
eeeemmmmm thats about it.
yes moley but i clock in at 8 and clock out at 12.4 hours. i dont work on customers cars before 8 or after 12.(4 hours)
what i ment was in a 4 hour working day i made 9 hours ie if you get 2 hours for a service and you can do it in 1 then you can do 4 two hour services in 4 hours their for making 8 hours in a 4 hour day...time saved bonus...ie i'm good and fast at what i do..lol
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
28-02-2017, 03:13 AM
How much would a ramp cost if someone wanted to put one in their garage :wink::wink:
Ps, did you get my pm ??
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Ok matey, you have done a good job polishing it and its a very good idea doing that on a ramp !!
How much would a ramp cost if someone wanted to put one in their garage :wink::wink:
Ps, did you get my pm ??
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
28-02-2017, 03:20 AM
i'll go check my clamps i need to get some too mate.....
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
you can get second hand ramps(2 poster ramp) for between £650-£2000 you can also buy cheap new ramps for £1200 -£3000 don't know how much for fitting though but it doesn't take them long to fit them.
i'll go check my clamps i need to get some too mate.....
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
28-02-2017, 03:22 AM
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Cheers mate, just thought I would ask, because if we move house and when I get a new garage I'll need to make it big enough for the ramp, like the one in your pic !!
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
28-02-2017, 03:28 AM
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
thats a four poster one just as cheap mate and it would come in handy for you but you would need to buy a beam jack to go with it (unless one comes with it)....so you can jack up the front or the rear of the car..
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
01-03-2017, 09:57 PM
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
01-03-2017, 09:57 PM #48You've done some great polishing work there Ormi ! :w00t:
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
19-03-2017, 02:22 PM
also got moley's cutting disks so going to give the crash bar a trimming down and open up the front bumper.
![[Image: p300410205201.jpg]](http://img534.imageshack.us/img534/4110/p300410205201.jpg)
![[Image: p3004102052.jpg]](http://img709.imageshack.us/img709/9391/p3004102052.jpg)
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
well heres my new coilovers will be getting fitted after work tomorrow!!:wink::wink::wink:
also got moley's cutting disks so going to give the crash bar a trimming down and open up the front bumper.
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
Recently Browsing
5 Guest(s)
5 Guest(s)
Recently Browsing
5 Guest(s)
5 Guest(s)