What now
What now
Almost Finished
28-02-2017, 10:13 AM #1Ive cleaned , polished and waxed the car , but what do i do now/next ? say the car is dirty , do i wash the car with just water or use a car shampoo , and do i have to keep waxing or is there another product to use ?
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
All you need to do is wash it with warm water and car shampoo, then rinse off with a hose without the nozzle and dry. Stand back and admire :thumbup1:
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
What the guys have said is correct, always use a car shampoo and warm water when re-washing the vehicle, water alone will not wash it correctly. If you are wanting to you can of course add another layer of wax to help with protection, but you wont want to do this every week. Depending what wax you are using, once a month will be fine if its a stage you really enjoy
What you can use after washing is some kind of quick detailer. After washing and drying, this will help remove any water marks that might remain and give the wax a touch more gloss. Meguiars Last Touch is great for this if you want to buy in bulk or Halfords sell a quick detailer spray bottle if that easier for you to get.
Personally, i would look into a product called Zaino Z8. It is a spray bottle, not cheap but does last. It can be used for those washes that are inbetween waxes. Simply spray a very small amount on a panel, the least you use the better with this product, wipe it using a clean microfibre evenly across the entire panel, turn over the cloth and buff off, then move onto the next panel. once the whole car is done, give the car a quick once over with a fresh microfibre incase any smears have appeared. This product seriously enhances the gloss, depth and slickness to a well prepped surface due to its optical clarifying polymers.
Its a kind of special occasion product
If you want to use this just after waxing, make sure you have left a good curing time for a wax to fully gas out.
Z8 will not last as long as most waxes, depednign on vehicle usage and weather conditions i would say a few weeks max, but it does certainly add that 'little something' and leaves a very glassy finish.
Christian
Invisible Touch Detailing
01-03-2017, 06:36 AM #4Hi Almost Finished,
What the guys have said is correct, always use a car shampoo and warm water when re-washing the vehicle, water alone will not wash it correctly. If you are wanting to you can of course add another layer of wax to help with protection, but you wont want to do this every week. Depending what wax you are using, once a month will be fine if its a stage you really enjoy
What you can use after washing is some kind of quick detailer. After washing and drying, this will help remove any water marks that might remain and give the wax a touch more gloss. Meguiars Last Touch is great for this if you want to buy in bulk or Halfords sell a quick detailer spray bottle if that easier for you to get.
Personally, i would look into a product called Zaino Z8. It is a spray bottle, not cheap but does last. It can be used for those washes that are inbetween waxes. Simply spray a very small amount on a panel, the least you use the better with this product, wipe it using a clean microfibre evenly across the entire panel, turn over the cloth and buff off, then move onto the next panel. once the whole car is done, give the car a quick once over with a fresh microfibre incase any smears have appeared. This product seriously enhances the gloss, depth and slickness to a well prepped surface due to its optical clarifying polymers.
Its a kind of special occasion product
If you want to use this just after waxing, make sure you have left a good curing time for a wax to fully gas out.
Z8 will not last as long as most waxes, depednign on vehicle usage and weather conditions i would say a few weeks max, but it does certainly add that 'little something' and leaves a very glassy finish.
Christian
http://www.advancedcarproducts.com/prodd...?prod=10Z8
Here the product that Christian is talking about but shop around..
http://www.advancedcarproducts.com/prodd...?prod=10Z8
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
01-03-2017, 11:13 AM #7It's worth getting some waffle drying cloths, as Lexusboy mentioned. Don't use a chamois or one of those blade thingies. Halford sell the waffle cloths now, as well as them being available from most online detailing suppliers, eBay etc.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
Invisible Touch Detailing
01-03-2017, 12:08 PM #8Aye, chuck your chamois, and the blade things yeah, just dont
Lexusboy I converted Rabster to the waffle drying cloth now.:thumbup1:
:thumbup:
For anyone who doesn't know what we're talking about, it's one of these (lots of similar ones available, e.g. Halfords) - see how the weave on the towel is in squares, i.e. like a waffle :
![[Image: derWunder1.jpg]](http://www.cleanyourcar.co.uk/images/uploads/derWunder1.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
01-03-2017, 10:00 PM #10Lexusboy I converted Rabster to the waffle drying cloth now.:thumbup1:
:thumbup:
For anyone who doesn't know what we're talking about, it's one of these (lots of similar ones available, e.g. Halfords) - see how the weave on the towel is in squares, i.e. like a waffle :
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
5 Guest(s)
5 Guest(s)