My new toys
My new toys
Hurricane Good work there. Looks like quite a lot of hassle with all those intercooler pipes in the way. What oil filter is that you have got? We need to get hold of the shorter filter to be able to fit a sandwich plate like you have.
Hurricane Good work there. Looks like quite a lot of hassle with all those intercooler pipes in the way. What oil filter is that you have got? We need to get hold of the shorter filter to be able to fit a sandwich plate like you have.
Bobby Is that because of the Ouzo or Raki you supply :wink:
(Apologies if the spelling is wrong but I am sure you know what swallae I mean :blushing
Ok i have a few questions and i need some help. I got the oil cooler kit not only to protect the engine from the warm weather in Greece during the summer period but also because i intend to fit soon an oil temp and oil pressure gauge on my triple gauge pod. The Mocal oil cooler kit has a sandwich plate without any ports to fit the pressure and temperature sensors. Does anyone have any suggestions what i can do in this case? I have read somewhere on the web that i can fit a t-piece section between the oil line and the sandwich plate. Will this work and is it a correct method or not?
As Gord said, I have got my oil temp sensor going into the sump
Gord You don't have to use the sandwich plate mate, for the oil temp, you can but a oil sump that the sensor fits into, and you can T off the oem oil pressure sensor, or you can do what you said and fit T between sandwich plate :biggrin:
Gord You don't have to use the sandwich plate mate, for the oil temp, you can but a oil sump that the sensor fits into, and you can T off the oem oil pressure sensor, or you can do what you said and fit T between sandwich plate :biggrin: