My new toys
My new toys
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
It just screws into the sump plug, you take out the plug and replace it with the new one
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Moley It just screws into the sump plug, you take out the plug and replace it with the new one
I got the message mate, thanks
. So i solved the problem with the oil temp :thumbup1:. So to add also the oil pressure i must use a T-section then. :glare:
LEXUS IS200 - The most fun car to go sideways
Moley It just screws into the sump plug, you take out the plug and replace it with the new one
I got the message mate, thanks
. So i solved the problem with the oil temp :thumbup1:. So to add also the oil pressure i must use a T-section then. :glare:
LEXUS IS200 - The most fun car to go sideways
neaky2:![[Image: 5lz0pi.jpg]](http://i41.tinypic.com/5lz0pi.jpg)
![[Image: ouci1i.jpg]](http://i40.tinypic.com/ouci1i.jpg)
First Option:
![[Image: vq4ho3.jpg]](http://i44.tinypic.com/vq4ho3.jpg)
Second Option:
![[Image: 1448leo.jpg]](http://i40.tinypic.com/1448leo.jpg)
Today I also received the TTE replica bumper (Fiber glass bumper). As you may see from the pics the bumper does not look bad. I even tried to match it on my car and it seems to fit well. ie it is not bigger than the OEM bumper like the Legana Asi purchased a couple of weeks ago. The only cons is that the bumper came with the now holes and clips in order to attach the bumper on the car. Also there are no holes for the fog lights. So this means more work for the paint shop. Furthermore there is a small crack at the bottom side of the bumper (probably happened during transportation) due to not good packaging. There were no bubble wraps or other means of protection in the carton box. Anyway there is not much i can do know. The shop is quite a few thousans miles away from home. So i have arranged on Monday to take the car at Toyota (where my mate works) and have it fitted and painted of course. I will also paing the bonnet since there a few chips from the stones on the road.
![[Image: mtv14.jpg]](http://i42.tinypic.com/mtv14.jpg)
![[Image: 2eykuxf.jpg]](http://i44.tinypic.com/2eykuxf.jpg)
![[Image: a14cxy.jpg]](http://i40.tinypic.com/a14cxy.jpg)
LEXUS IS200 - The most fun car to go sideways
Today some more parts arrived. As you may know i had ordered from USA black arm rests for all my door panels. Well here is how they look. I am not sure if the wood kit matches with black arm rests. What do you think? My other option is to use the normal switch door switches. I might even cover them with 3M carbon fiber film.
First Option:
Second Option:
Today I also received the TTE replica bumper (Fiber glass bumper). As you may see from the pics the bumper does not look bad. I even tried to match it on my car and it seems to fit well. ie it is not bigger than the OEM bumper like the Legana Asi purchased a couple of weeks ago. The only cons is that the bumper came with the now holes and clips in order to attach the bumper on the car. Also there are no holes for the fog lights. So this means more work for the paint shop. Furthermore there is a small crack at the bottom side of the bumper (probably happened during transportation) due to not good packaging. There were no bubble wraps or other means of protection in the carton box. Anyway there is not much i can do know. The shop is quite a few thousans miles away from home. So i have arranged on Monday to take the car at Toyota (where my mate works) and have it fitted and painted of course. I will also paing the bonnet since there a few chips from the stones on the road.
LEXUS IS200 - The most fun car to go sideways
[SIGPIC][/SIGPIC]
Mods:...WIM geometry setup & fine tune, K&N Air filter, Stainless steel A/C rings, Brodit phone kit, Stainless steel clock surround, B&M Shortshifter & LED Domelight, Maplight & Sun Visors, OEM Chrome exhaust tip, OEM rubber bootliner, Fan type windscreen washer jets, LS430 Side repeaters, OEM LE grille, OEM cargo net, Front OEM armrest
Loose the wood- i'd go for the carbon fibre or OEM.
[SIGPIC][/SIGPIC]
Mods:...WIM geometry setup & fine tune, K&N Air filter, Stainless steel A/C rings, Brodit phone kit, Stainless steel clock surround, B&M Shortshifter & LED Domelight, Maplight & Sun Visors, OEM Chrome exhaust tip, OEM rubber bootliner, Fan type windscreen washer jets, LS430 Side repeaters, OEM LE grille, OEM cargo net, Front OEM armrest
russelllinn
03-03-2017, 02:15 PM #528I agree with the above, I think I would go OEM though so there is not too much of a mixture of materials. Bumper looks a good replica mate, hope it fits well.
14 Guest(s)
14 Guest(s)