Stainless Steel Outlaw Plaque?
Stainless Steel Outlaw Plaque?
Well after seing the post about possible outlaw stickers and Bobby wanting to do something with his engine cover i had a thought.
Would there be any interest in some sort of Stainless Steel 'Outlaw' plaque maybe something for engine dress up/ice install etc.
If there is enough interest then it may be worth while, the more people there are the cheaper each one becomes! They would all need to be the same though, if they are all diferent then the price goes up, a LOT!!!! its not me that sets the prices its the company i use to do the etching process, i have looked about and they are at least 3 times cheaper than the competition.
Those in RED have now paid........
1. Kam05 - Lexus
2. MarsdenDean - kanji
3. Cameron - Lexus
4. DaveEdin - Kanji
5. Moley - kanji
6. Lexusboy Lexus
7. Dark Samurai - Kanji
8. Phil01 - Kanji
9. Wozza - Lexus
10. Bobby - Kanji
11. Asi - Lexus
[COLOR="Red"]12. Rabster - Lexus
13. Rabster - kanji[/COLOR]
[COLOR="Red"]14. Hurricane - Kanji
15. Bandit - Kanji[/COLOR]
16. alamkhan3980 - Lexus
17. steviewevie - Kanji
18. Ormi - kanji
19. lexuspat - lexus
20. Y2KANJAR - Lexus
21. Gord - kanji
22. IS300 Dino -kanji
23. icemahn - kanji
24. Mikey is200/s13 - Lexus
25. warpspeed - kanji
Jason
Hi All,
Well after seing the post about possible outlaw stickers and Bobby wanting to do something with his engine cover i had a thought.
Would there be any interest in some sort of Stainless Steel 'Outlaw' plaque maybe something for engine dress up/ice install etc.
If there is enough interest then it may be worth while, the more people there are the cheaper each one becomes! They would all need to be the same though, if they are all diferent then the price goes up, a LOT!!!! its not me that sets the prices its the company i use to do the etching process, i have looked about and they are at least 3 times cheaper than the competition.
Those in RED have now paid........
1. Kam05 - Lexus
2. MarsdenDean - kanji
3. Cameron - Lexus
4. DaveEdin - Kanji
5. Moley - kanji
6. Lexusboy Lexus
7. Dark Samurai - Kanji
8. Phil01 - Kanji
9. Wozza - Lexus
10. Bobby - Kanji
11. Asi - Lexus
[COLOR="Red"]12. Rabster - Lexus
13. Rabster - kanji[/COLOR]
[COLOR="Red"]14. Hurricane - Kanji
15. Bandit - Kanji[/COLOR]
16. alamkhan3980 - Lexus
17. steviewevie - Kanji
18. Ormi - kanji
19. lexuspat - lexus
20. Y2KANJAR - Lexus
21. Gord - kanji
22. IS300 Dino -kanji
23. icemahn - kanji
24. Mikey is200/s13 - Lexus
25. warpspeed - kanji
Jason
I had a lexus one made a while back for the inside of my bootlid, will go and get a picture of it, it was a one off and cost me about £38 (beacuse it was a one off) but was a trial piece.
Jason
I can do the Japanese lettering/symbol for outlaw. They price on size of job, not what is etched nto the plaques so we need to decide size and design before i can get a accurate quote!
I had a lexus one made a while back for the inside of my bootlid, will go and get a picture of it, it was a one off and cost me about £38 (beacuse it was a one off) but was a trial piece.
Jason
![[Image: DSC01168.jpg]](http://i920.photobucket.com/albums/ad42/demon_buggy/DSC01168.jpg)
![[Image: DSC01169.jpg]](http://i920.photobucket.com/albums/ad42/demon_buggy/DSC01169.jpg)
I can supply the stainless Hex head bolts with the plaque also as we have 1000's at work
This is the one on the inside of my bootlid, maybe something similar with the Outlaw symbol???
I can supply the stainless Hex head bolts with the plaque also as we have 1000's at work
Demon
That looks good. I'd be interested in one of those if you were to start making them.
[SIGPIC][/SIGPIC]
Mods:...WIM geometry setup & fine tune, K&N Air filter, Stainless steel A/C rings, Brodit phone kit, Stainless steel clock surround, B&M Shortshifter & LED Domelight, Maplight & Sun Visors, OEM Chrome exhaust tip, OEM rubber bootliner, Fan type windscreen washer jets, LS430 Side repeaters, OEM LE grille, OEM cargo net, Front OEM armrest
Demon
That looks good. I'd be interested in one of those if you were to start making them.
[SIGPIC][/SIGPIC]
Mods:...WIM geometry setup & fine tune, K&N Air filter, Stainless steel A/C rings, Brodit phone kit, Stainless steel clock surround, B&M Shortshifter & LED Domelight, Maplight & Sun Visors, OEM Chrome exhaust tip, OEM rubber bootliner, Fan type windscreen washer jets, LS430 Side repeaters, OEM LE grille, OEM cargo net, Front OEM armrest
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
That looks good and would like it with "Outlaw" in Kanji symbols as Bobby suggested , also would be interested in buying some of the S/S hex bolts from you for the engine bay if they were the correct thread
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Marsdendean I would be interested in Kanji symbols. What are the chances of having scuff plates with them on??
I wouldn't be able to get scuff plates made using the same process, they have a sheet width of 300mm. The scuff plates would need laser cutting!
Is it worth starting a list for these???
Jason
Marsdendean I would be interested in Kanji symbols. What are the chances of having scuff plates with them on??
I wouldn't be able to get scuff plates made using the same process, they have a sheet width of 300mm. The scuff plates would need laser cutting!
Is it worth starting a list for these???
Jason
5 Guest(s)
5 Guest(s)
Views 137
Last Post by
Views 1,534
Last Post by
Views 204
Last Post by
Views 254
Last Post by
Views 5,953
Last Post by
Views 6,687
Last Post by
Views 1,492
Last Post by
Views 536
Last Post by
Views 1,101
Last Post by
Views 2,035
Last Post by