Backing plate
Backing plate
09-03-2018, 04:29 AM
MODS- Geomtry Done(WIM Settings) -Arm Rest -TRD Front skirt -18"Sport Alloy's(Thanks Widnes is200)- Lowered 40mm -Sports Grille(repositoned horns)- Hid's 6000k Dipped -Xenon 6500k Main- LED Tower Sidelights -LED boot light -36 LED Dome Light- Polished Stainless Gearknob- Chrome Tail Pipe -Stainless A/C Rings & Clock Panel - JDM dash tray -Clear Door Lenses with Blue LED's- 6" Altezza Aerial- TOM's Ram II Air Filter- Fog/Brake Conversion -Fan Washer Jets- Stainless Dials.
Would it cause any problems if i removed the backing plate from the brake disc's ? No matter how much i bend it back it still makes this rubbing/droning noise :confused1:
MODS- Geomtry Done(WIM Settings) -Arm Rest -TRD Front skirt -18"Sport Alloy's(Thanks Widnes is200)- Lowered 40mm -Sports Grille(repositoned horns)- Hid's 6000k Dipped -Xenon 6500k Main- LED Tower Sidelights -LED boot light -36 LED Dome Light- Polished Stainless Gearknob- Chrome Tail Pipe -Stainless A/C Rings & Clock Panel - JDM dash tray -Clear Door Lenses with Blue LED's- 6" Altezza Aerial- TOM's Ram II Air Filter- Fog/Brake Conversion -Fan Washer Jets- Stainless Dials.
09-03-2018, 05:40 AM
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
09-03-2018, 05:40 AM #2It's just there to contain the dust. I'm not quite clear if it's to stop the brake dust getting into somewhere specific (like the wheel hub), or just a general thing to keep things a bit cleaner.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
09-03-2018, 06:38 AM
MODS- Geomtry Done(WIM Settings) -Arm Rest -TRD Front skirt -18"Sport Alloy's(Thanks Widnes is200)- Lowered 40mm -Sports Grille(repositoned horns)- Hid's 6000k Dipped -Xenon 6500k Main- LED Tower Sidelights -LED boot light -36 LED Dome Light- Polished Stainless Gearknob- Chrome Tail Pipe -Stainless A/C Rings & Clock Panel - JDM dash tray -Clear Door Lenses with Blue LED's- 6" Altezza Aerial- TOM's Ram II Air Filter- Fog/Brake Conversion -Fan Washer Jets- Stainless Dials.
Thanks Stevie.
MODS- Geomtry Done(WIM Settings) -Arm Rest -TRD Front skirt -18"Sport Alloy's(Thanks Widnes is200)- Lowered 40mm -Sports Grille(repositoned horns)- Hid's 6000k Dipped -Xenon 6500k Main- LED Tower Sidelights -LED boot light -36 LED Dome Light- Polished Stainless Gearknob- Chrome Tail Pipe -Stainless A/C Rings & Clock Panel - JDM dash tray -Clear Door Lenses with Blue LED's- 6" Altezza Aerial- TOM's Ram II Air Filter- Fog/Brake Conversion -Fan Washer Jets- Stainless Dials.
09-03-2018, 11:24 AM
I would reshape it and leave it in place.
1990 Eunos Roadster in Mariner DU blue
Cobalt cat back, Decat pipe, 15in Red Rota GT3 alloys, Toyo tyres, Lowered on Coil overs, Red anti roll bars, 14degree timing mod, white dash kit, illuminated side marker lights,
Halo ring headlights, OEM windblocker, Bluetooth streaming HU, Blue leather handbrake and gear lever gaitor, Centre brake/tail light mod, Blue velour door cards, Polished cam cover, Polished front strut bar, 4xheadrest speakers, JDM floor mats, Suede semi dish steering wheel,
The back plate is also there to channel cooling air to the rear face of the brake disc, to stop water getting on to the disc as well,
I would reshape it and leave it in place.
1990 Eunos Roadster in Mariner DU blue
Cobalt cat back, Decat pipe, 15in Red Rota GT3 alloys, Toyo tyres, Lowered on Coil overs, Red anti roll bars, 14degree timing mod, white dash kit, illuminated side marker lights,
Halo ring headlights, OEM windblocker, Bluetooth streaming HU, Blue leather handbrake and gear lever gaitor, Centre brake/tail light mod, Blue velour door cards, Polished cam cover, Polished front strut bar, 4xheadrest speakers, JDM floor mats, Suede semi dish steering wheel,
09-03-2018, 12:34 PM
Latest Meets
[COLOR="Red"]Jap Show Finale 10,
Ace Cafe 16/10/10,
Miss Banzai Tunnel Run 16/10/10 -Car No: 368 -Tunnels Completed: 100%[/COLOR]
It might be the break pads? Dean had a similar problem with his, but it was because his brake disk was slightly warn, leaving a lip on the edge of the disk. This then cought on the brake disks.... its common i though? (As it made the same noise without changing the pads)
Latest Meets
[COLOR="Red"]Jap Show Finale 10,
Ace Cafe 16/10/10,
Miss Banzai Tunnel Run 16/10/10 -Car No: 368 -Tunnels Completed: 100%[/COLOR]
Recently Browsing
1 Guest(s)
1 Guest(s)
Recently Browsing
1 Guest(s)
1 Guest(s)
Related Threads…
Replies 2
Views 361
Views 361
31-05-2021, 06:26 AM
Last Post byreganlives
Last Post by
Replies 24
Views 2,383
Views 2,383
07-07-2019, 01:53 PM
Last Post byjomo
Last Post by
Replies 9
Views 846
Views 846
18-03-2019, 01:44 PM
Last Post bydanielson
Last Post by
Replies 19
Views 1,737
Views 1,737
25-01-2019, 09:17 PM
Last Post byis300_dino
Last Post by
Replies 44
Views 2,739
Views 2,739
24-09-2018, 07:35 PM
Last Post byis300_dino
Last Post by