Drive flanges - what are they?
Drive flanges - what are they?
I've just checked with Tony and those are the right parts. I think I need everything in the bottom pic, he said the bearings come as a kit, then the hubs, discs and pads.
@Steve do you have the part numbers that are required? So is everything in that bottom pic covered by 3 part numbers?
parthiban I've just checked with Tony and those are the right parts. I think I need everything in the bottom pic, he said the bearings come as a kit, then the hubs, discs and pads.
@Steve do you have the part numbers that are required? So is everything in that bottom pic covered by 3 part numbers?
parthiban I've just checked with Tony and those are the right parts. I think I need everything in the bottom pic, he said the bearings come as a kit, then the hubs, discs and pads.
@Steve do you have the part numbers that are required? So is everything in that bottom pic covered by 3 part numbers?
SHAHZ Why dont you get some mintex discs & pads, IIRC they are cheaper than the stock ones
SHAHZ Why dont you get some mintex discs & pads, IIRC they are cheaper than the stock ones
The hub bolt is 90942-02070, if you need that.
Working backwards from the hub :
oil seal - 90311-48013
ring - 90521-77001
bearing - 90363-32035
Do you need any more ? There's a rotor, cap and nut behind the wheel bearing.
steviewevie The hub bolt is 90942-02070, if you need that.
Working backwards from the hub :
oil seal - 90311-48013
ring - 90521-77001
bearing - 90363-32035
Do you need any more ? There's a rotor, cap and nut behind the wheel bearing.
steviewevie The hub bolt is 90942-02070, if you need that.
Working backwards from the hub :
oil seal - 90311-48013
ring - 90521-77001
bearing - 90363-32035
Do you need any more ? There's a rotor, cap and nut behind the wheel bearing.
fl@nge and hub are the same mate....
ormi fl@nge and hub are the same mate....
ormi fl@nge and hub are the same mate....