JapCarForum General Discussions The JCF Lounge hids

hids

hids

Pages (2): 1 2 Next
garyskisplym
Senior Member
714
07-04-2017, 04:56 AM
#1
Can anyone please point me in the right direction for a decent hid kit.

Been hold to stay away from cheap kits but i dont really know what im looking at

Gary

BHP, TORQUE, UNDER STEER, OVERSTEER FOR DUMMYS
BHP- how fast you hit the wall, TORQUE- how far you push the wall
OVER STEER- Dont see the wall, UNDER STEER- You do see it
1999 Blue IS200 SportTRD kit, K&N Filter
garyskisplym
07-04-2017, 04:56 AM #1

Can anyone please point me in the right direction for a decent hid kit.

Been hold to stay away from cheap kits but i dont really know what im looking at

Gary


BHP, TORQUE, UNDER STEER, OVERSTEER FOR DUMMYS
BHP- how fast you hit the wall, TORQUE- how far you push the wall
OVER STEER- Dont see the wall, UNDER STEER- You do see it
1999 Blue IS200 SportTRD kit, K&N Filter

kam05
Senior Member
387
07-04-2017, 05:10 AM
#2
You want this kit: http://cgi.ebay.co.uk/Xenon-HID-Conversi...4cec249814

I got the same kit from the same seller last year- fast delivery. Go for 6000k bulbs.

[SIGPIC][/SIGPIC]

Mods:...WIM geometry setup & fine tune, K&N Air filter, Stainless steel A/C rings, Brodit phone kit, Stainless steel clock surround, B&M Shortshifter & LED Domelight, Maplight & Sun Visors, OEM Chrome exhaust tip, OEM rubber bootliner, Fan type windscreen washer jets, LS430 Side repeaters, OEM LE grille, OEM cargo net, Front OEM armrest
kam05
07-04-2017, 05:10 AM #2

You want this kit: http://cgi.ebay.co.uk/Xenon-HID-Conversi...4cec249814

I got the same kit from the same seller last year- fast delivery. Go for 6000k bulbs.


[SIGPIC][/SIGPIC]

Mods:...WIM geometry setup & fine tune, K&N Air filter, Stainless steel A/C rings, Brodit phone kit, Stainless steel clock surround, B&M Shortshifter & LED Domelight, Maplight & Sun Visors, OEM Chrome exhaust tip, OEM rubber bootliner, Fan type windscreen washer jets, LS430 Side repeaters, OEM LE grille, OEM cargo net, Front OEM armrest

SHAHZ
Posting Freak
2,142
07-04-2017, 05:18 AM
#3
A few of us have bought from here if you can wait a little for delivery, think it took under a week when i ordered. The only thing is, they come with a warrenty however would be a pain to post back if they become faulty......ive not had any problems wiith mine though....although the link Kam posted does look really good for the price, 2 years warrenty and they are the small ballasts!

Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
SHAHZ
07-04-2017, 05:18 AM #3

A few of us have bought from here if you can wait a little for delivery, think it took under a week when i ordered. The only thing is, they come with a warrenty however would be a pain to post back if they become faulty......ive not had any problems wiith mine though....although the link Kam posted does look really good for the price, 2 years warrenty and they are the small ballasts!


Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R

Dan_Turism0
Posting Freak
2,825
07-04-2017, 05:26 AM
#4
few of us got ours from HERE took under a week and mine have been running fine for well over a year now Smile Just pm the guy the colour temp and bulb fitment you want and job done

My Garage
Supra Build Thread

' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.
Dan_Turism0
07-04-2017, 05:26 AM #4

few of us got ours from HERE took under a week and mine have been running fine for well over a year now Smile Just pm the guy the colour temp and bulb fitment you want and job done


My Garage
Supra Build Thread

' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.

reganlives
Posting Freak
1,230
07-04-2017, 05:27 AM
#5
I got my HIDs from diane-shop as well and think they're great although one of my ballasts has failed but they come with an 18month warranty and when I got in touch with them about the failed ballast they told me to send both back and will replace both of them so I get 2 new ballasts now. I'm sending mine back this week. Cant wait to get the hids back in as its like driving blind with halogen bulbs in again.
reganlives
07-04-2017, 05:27 AM #5

I got my HIDs from diane-shop as well and think they're great although one of my ballasts has failed but they come with an 18month warranty and when I got in touch with them about the failed ballast they told me to send both back and will replace both of them so I get 2 new ballasts now. I'm sending mine back this week. Cant wait to get the hids back in as its like driving blind with halogen bulbs in again.

steviewevie
Posting Freak
7,993
07-04-2017, 07:22 AM
#6
When you come to fit them, you'll find that if you plug them in "normally", they won't work.

For some reason, the IS200 wiring seems to be the "wrong" way round. So when it comes to plugging the connector from the car into the ballast, plug it in upside-down, and that should fix it. You may have to trim the connector if there is a tab preventing this, or you might just be able to force it.

Don't worry though, if you plug it in and it doesn't work, you won't break anything, it's just that the HIDs don't work.

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
07-04-2017, 07:22 AM #6

When you come to fit them, you'll find that if you plug them in "normally", they won't work.

For some reason, the IS200 wiring seems to be the "wrong" way round. So when it comes to plugging the connector from the car into the ballast, plug it in upside-down, and that should fix it. You may have to trim the connector if there is a tab preventing this, or you might just be able to force it.

Don't worry though, if you plug it in and it doesn't work, you won't break anything, it's just that the HIDs don't work.


[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

John G
Senior Member
418
07-04-2017, 08:02 AM
#7
kam05 You want this kit: http://cgi.ebay.co.uk/Xenon-HID-Conversi...4cec249814

I got the same kit from the same seller last year- fast delivery. Go for 6000k bulbs.

Mega thumbs up to this seller, ballasts are tiny and a great kit

[Image: MySig.jpg]
John G
07-04-2017, 08:02 AM #7

kam05 You want this kit: http://cgi.ebay.co.uk/Xenon-HID-Conversi...4cec249814

I got the same kit from the same seller last year- fast delivery. Go for 6000k bulbs.

Mega thumbs up to this seller, ballasts are tiny and a great kit


[Image: MySig.jpg]

dodgydave
Senior Member
472
07-04-2017, 10:58 AM
#8
reganlives I got my HIDs from diane-shop as well and think they're great although one of my ballasts has failed but they come with an 18month warranty and when I got in touch with them about the failed ballast they told me to send both back and will replace both of them so I get 2 new ballasts now. I'm sending mine back this week. Cant wait to get the hids back in as its like driving blind with halogen bulbs in again.

I got mine from diane-shop too. I had 1 ballast burn out after just over a year. I couldn't be arsed to send the ballasts back and just ordered 1 new ballast from them. I think it was about 15quid delivered.
dodgydave
07-04-2017, 10:58 AM #8

reganlives I got my HIDs from diane-shop as well and think they're great although one of my ballasts has failed but they come with an 18month warranty and when I got in touch with them about the failed ballast they told me to send both back and will replace both of them so I get 2 new ballasts now. I'm sending mine back this week. Cant wait to get the hids back in as its like driving blind with halogen bulbs in again.

I got mine from diane-shop too. I had 1 ballast burn out after just over a year. I couldn't be arsed to send the ballasts back and just ordered 1 new ballast from them. I think it was about 15quid delivered.

spikes
Posting Freak
1,153
07-04-2017, 12:30 PM
#9
bought mine off ebay,but an english seller. had no probs with them.

used 6000k.dont go too blue or you stand more chance of being pulled by the law

spikes
spikes
07-04-2017, 12:30 PM #9

bought mine off ebay,but an english seller. had no probs with them.

used 6000k.dont go too blue or you stand more chance of being pulled by the law


spikes

garyskisplym
Senior Member
714
08-04-2017, 03:50 AM
#10
steviewevie When you come to fit them, you'll find that if you plug them in "normally", they won't work.

For some reason, the IS200 wiring seems to be the "wrong" way round. So when it comes to plugging the connector from the car into the ballast, plug it in upside-down, and that should fix it. You may have to trim the connector if there is a tab preventing this, or you might just be able to force it.

Don't worry though, if you plug it in and it doesn't work, you won't break anything, it's just that the HIDs don't work.

This is a common fault on jap cars mate.

A mate of mine had the proplem on his swift gti.

What grade would people say best between colour and brightness??

BHP, TORQUE, UNDER STEER, OVERSTEER FOR DUMMYS
BHP- how fast you hit the wall, TORQUE- how far you push the wall
OVER STEER- Dont see the wall, UNDER STEER- You do see it
1999 Blue IS200 SportTRD kit, K&N Filter
garyskisplym
08-04-2017, 03:50 AM #10

steviewevie When you come to fit them, you'll find that if you plug them in "normally", they won't work.

For some reason, the IS200 wiring seems to be the "wrong" way round. So when it comes to plugging the connector from the car into the ballast, plug it in upside-down, and that should fix it. You may have to trim the connector if there is a tab preventing this, or you might just be able to force it.

Don't worry though, if you plug it in and it doesn't work, you won't break anything, it's just that the HIDs don't work.

This is a common fault on jap cars mate.

A mate of mine had the proplem on his swift gti.

What grade would people say best between colour and brightness??


BHP, TORQUE, UNDER STEER, OVERSTEER FOR DUMMYS
BHP- how fast you hit the wall, TORQUE- how far you push the wall
OVER STEER- Dont see the wall, UNDER STEER- You do see it
1999 Blue IS200 SportTRD kit, K&N Filter

Pages (2): 1 2 Next
Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 0
Views 174
28-09-2016, 12:52 PM
Last Post by ormi