JapCarForum General Discussions The JCF Lounge Any Plumbers in the house??

Any Plumbers in the house??

Any Plumbers in the house??

Pages (3): 1 2 3 Next
SHAHZ
Posting Freak
2,142
12-04-2017, 04:09 AM
#1
Want to fit an outdoor tap, will go on the wall behind the kitchen sink so not much pipe will be needed. Want to use plastic pipes to make it easier, just wanted to ask if its possible to tap into the current mains (cooper) with a plastic 'T'...or would it be better to solder a copper pipe (ive been told that compression joints shouldnt be used = problems if it freezes)

Cheers
Edited 24-05-2010, 01:52 PM by SHAHZ.

Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
SHAHZ
12-04-2017, 04:09 AM #1

Want to fit an outdoor tap, will go on the wall behind the kitchen sink so not much pipe will be needed. Want to use plastic pipes to make it easier, just wanted to ask if its possible to tap into the current mains (cooper) with a plastic 'T'...or would it be better to solder a copper pipe (ive been told that compression joints shouldnt be used = problems if it freezes)

Cheers


Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R

FirebirdPhil
Posting Freak
7,101
12-04-2017, 04:20 AM
#2
Dean mate will be the one for this!!

You are better off with copper though, there are some very good fast fit copper fittings available.

"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
12-04-2017, 04:20 AM #2

Dean mate will be the one for this!!

You are better off with copper though, there are some very good fast fit copper fittings available.


"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"

parthiban
Posting Freak
4,925
12-04-2017, 04:38 AM
#3
The plastic ones should be fine, a lot of new houses have the plastic pipes throughout although I'm no plumbing expert.

Only thing I know with copper is that it's hard to get a decent solder joint if a pipe is wet, so compression fittings are generally used in these instances. If compression doesn't do well in cold, then plastic might be the way to go (but they're compression too aren't they?)

2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]
parthiban
12-04-2017, 04:38 AM #3

The plastic ones should be fine, a lot of new houses have the plastic pipes throughout although I'm no plumbing expert.

Only thing I know with copper is that it's hard to get a decent solder joint if a pipe is wet, so compression fittings are generally used in these instances. If compression doesn't do well in cold, then plastic might be the way to go (but they're compression too aren't they?)


2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]

SHAHZ
Posting Freak
2,142
12-04-2017, 05:31 AM
#4
parthiban then plastic might be the way to go (but they're compression too aren't they?)

Good point mate, but i think it might be to do with the olive.....Does the plastic joints have O rings or an olive?

Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
SHAHZ
12-04-2017, 05:31 AM #4

parthiban then plastic might be the way to go (but they're compression too aren't they?)

Good point mate, but i think it might be to do with the olive.....Does the plastic joints have O rings or an olive?


Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R

parthiban
Posting Freak
4,925
13-04-2017, 12:46 AM
#5
Thinking about it couldn't you use the push fit type plastic connectors?

2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]
parthiban
13-04-2017, 12:46 AM #5

Thinking about it couldn't you use the push fit type plastic connectors?


2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]

Sparkystav
Administrator
14,683
13-04-2017, 12:57 AM
#6
Ive done the same thing already mate,
you can buy a screw on fitting, literally put it around the copper pipe and tighten, it pierces the pipe and jobs a good un, its got a tap so you can turn it off for the winter etc, then its just plastic pipe with push on fitting to the outside, screw the tap to the wall and job done

OutlawJapClub Admin Team
Sparkystav
13-04-2017, 12:57 AM #6

Ive done the same thing already mate,
you can buy a screw on fitting, literally put it around the copper pipe and tighten, it pierces the pipe and jobs a good un, its got a tap so you can turn it off for the winter etc, then its just plastic pipe with push on fitting to the outside, screw the tap to the wall and job done


OutlawJapClub Admin Team

Sparkystav
Administrator
14,683
13-04-2017, 12:58 AM
#7
this is the exact one i have:

http://www.screwfix.com/prods/10101/Plum...0Tap%20Kit

OutlawJapClub Admin Team
Sparkystav
13-04-2017, 12:58 AM #7

this is the exact one i have:

http://www.screwfix.com/prods/10101/Plum...0Tap%20Kit


OutlawJapClub Admin Team

SHAHZ
Posting Freak
2,142
13-04-2017, 12:58 AM
#8
Are they any good though, is there any loss of pressure/ less water ??

Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
SHAHZ
13-04-2017, 12:58 AM #8

Are they any good though, is there any loss of pressure/ less water ??


Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R

Tango
Senior Member
314
13-04-2017, 02:05 AM
#9
SHAHZ Are they any good though, is there any loss of pressure/ less water ??

Don't you have a gas torch? It's easy enough to do the job properly with a few pre-soldered fittings and copper pipe.

IS 200 Sport with a few mods, Standardish IS-F. The IS250 SE-L with a few mods has gone to a new home.[SIGPIC][/SIGPIC]
Tango
13-04-2017, 02:05 AM #9

SHAHZ Are they any good though, is there any loss of pressure/ less water ??

Don't you have a gas torch? It's easy enough to do the job properly with a few pre-soldered fittings and copper pipe.


IS 200 Sport with a few mods, Standardish IS-F. The IS250 SE-L with a few mods has gone to a new home.[SIGPIC][/SIGPIC]

jomo
Senior Member
709
13-04-2017, 02:26 AM
#10
Used the same tap fitting kit as Stav, works a treat imo.
Just had to drill hole through wall to the outside, job was done start to finish in 15-20mins.

Had no leaks and no loss of water pressure at all. Easiest way to do the job.

[Image: is200%20catoon.jpg] [Image: 104113415648fa201e2ecb5.gif] [Image: 91-bluescreen.gif]
jomo
13-04-2017, 02:26 AM #10

Used the same tap fitting kit as Stav, works a treat imo.
Just had to drill hole through wall to the outside, job was done start to finish in 15-20mins.

Had no leaks and no loss of water pressure at all. Easiest way to do the job.


[Image: is200%20catoon.jpg] [Image: 104113415648fa201e2ecb5.gif] [Image: 91-bluescreen.gif]

Pages (3): 1 2 3 Next
Recently Browsing
 2 Guest(s)
Recently Browsing
 2 Guest(s)
Related Threads…
Replies 0
Views 153
13-03-2019, 04:12 AM
Last Post by JonPowellDJ
Replies 7
Views 293
10-02-2019, 05:47 AM
Last Post by Sparkystav
Replies 47
Views 1,979
29-01-2019, 02:43 PM
Last Post by DaveEdin
Replies 23
Views 986
19-07-2018, 03:40 AM
Last Post by Carpediem
Replies 9
Views 398
11-07-2018, 03:16 AM
Last Post by JonPowellDJ
Replies 21
Views 876
01-06-2018, 01:11 AM
Last Post by parthiban
Replies 50
Views 2,718
13-01-2018, 09:26 AM
Last Post by Moley