JapCarForum General Discussions The JCF Lounge Any Plumbers in the house??

Any Plumbers in the house??

Any Plumbers in the house??

Pages (3): Previous 1 2 3
Tango
Senior Member
314
14-04-2017, 10:17 AM
#21
Here's some pics of one that I put in with soldered fittings from under a basin in a groundfloor utility room. I fitted an in-line ball valve to isolate the tap in the winter, but because of the short length of pipe exposed to the outside I've never had a problem with freezing. The tee off the cold feed is buried behind the tiles.

[Image: tapxv.jpg] [Image: photoqf.jpg]

IS 200 Sport with a few mods, Standardish IS-F. The IS250 SE-L with a few mods has gone to a new home.[SIGPIC][/SIGPIC]
Tango
14-04-2017, 10:17 AM #21

Here's some pics of one that I put in with soldered fittings from under a basin in a groundfloor utility room. I fitted an in-line ball valve to isolate the tap in the winter, but because of the short length of pipe exposed to the outside I've never had a problem with freezing. The tee off the cold feed is buried behind the tiles.

[Image: tapxv.jpg] [Image: photoqf.jpg]


IS 200 Sport with a few mods, Standardish IS-F. The IS250 SE-L with a few mods has gone to a new home.[SIGPIC][/SIGPIC]

SHAHZ
Posting Freak
2,142
14-04-2017, 10:27 AM
#22
That is pretty much all i would need outside so cant see it having problems freezing.....so do all of those inline taps have valves built in?

Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
SHAHZ
14-04-2017, 10:27 AM #22

That is pretty much all i would need outside so cant see it having problems freezing.....so do all of those inline taps have valves built in?


Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R

Tango
Senior Member
314
14-04-2017, 11:19 PM
#23
The fitting shown in Marsdendean and my pics is an in-line ball valve for the option to isolate the tap from the water supply. It's turned off and on with a screwdriver.

Parts to set up my outside tap:
-1 off 15mm soldered tee
-3 off 15mm soldered elbows
-15mm copper pipe cut to suit (5 off lengths)
-1 off 15mm in-line ball valve with compression fittings for end connection
-1 off outside tap and flange mounting with 15mm compression fitting
and some PTFE tape for the two threaded connections on the tap.
Edited 27-05-2010, 08:56 AM by Tango.

IS 200 Sport with a few mods, Standardish IS-F. The IS250 SE-L with a few mods has gone to a new home.[SIGPIC][/SIGPIC]
Tango
14-04-2017, 11:19 PM #23

The fitting shown in Marsdendean and my pics is an in-line ball valve for the option to isolate the tap from the water supply. It's turned off and on with a screwdriver.

Parts to set up my outside tap:
-1 off 15mm soldered tee
-3 off 15mm soldered elbows
-15mm copper pipe cut to suit (5 off lengths)
-1 off 15mm in-line ball valve with compression fittings for end connection
-1 off outside tap and flange mounting with 15mm compression fitting
and some PTFE tape for the two threaded connections on the tap.


IS 200 Sport with a few mods, Standardish IS-F. The IS250 SE-L with a few mods has gone to a new home.[SIGPIC][/SIGPIC]

SHAHZ
Posting Freak
2,142
14-04-2017, 11:22 PM
#24
Cheers Mate, will be doing this at somepoint next week:thumbup1:

Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
SHAHZ
14-04-2017, 11:22 PM #24

Cheers Mate, will be doing this at somepoint next week:thumbup1:


Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R

valo
Member
99
15-04-2017, 11:56 AM
#25
If you wanted you could always go a bit excessive (like me) and have a hot water outside as well.
[Image: d05fbde3.jpg]
[Image: 20c574a6.jpg]

Although I did re-do all the plumbing while I was at it.

Mitsubishi Lancer Evolution X GSR SST FQ-300 (White Pearlescent)
[Image: sm78015.jpg]
valo
15-04-2017, 11:56 AM #25

If you wanted you could always go a bit excessive (like me) and have a hot water outside as well.
[Image: d05fbde3.jpg]
[Image: 20c574a6.jpg]

Although I did re-do all the plumbing while I was at it.


Mitsubishi Lancer Evolution X GSR SST FQ-300 (White Pearlescent)
[Image: sm78015.jpg]

SHAHZ
Posting Freak
2,142
03-05-2017, 01:50 AM
#26
Thanks for the input guys, done this last weekend, used copper in the end with an inline ball valve, 'T' and a few bends......had to have more pipe outside then i first thought as it would have been awkward to have run the pipe from inside behind the cupboards so just went straight out and round!

Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
SHAHZ
03-05-2017, 01:50 AM #26

Thanks for the input guys, done this last weekend, used copper in the end with an inline ball valve, 'T' and a few bends......had to have more pipe outside then i first thought as it would have been awkward to have run the pipe from inside behind the cupboards so just went straight out and round!


Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R

parthiban
Posting Freak
4,925
03-05-2017, 12:11 PM
#27
Nice job mate, where's the pics and the walkthrough? :w00t:

2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]
parthiban
03-05-2017, 12:11 PM #27

Nice job mate, where's the pics and the walkthrough? :w00t:


2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]

SHAHZ
Posting Freak
2,142
03-05-2017, 10:54 PM
#28
oopps, didnt do one:Fish:.....can post a pic up of a tap on the wall if you like:lol:

Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
SHAHZ
03-05-2017, 10:54 PM #28

oopps, didnt do one:Fish:.....can post a pic up of a tap on the wall if you like:lol:


Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R

Pages (3): Previous 1 2 3
Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 0
Views 152
13-03-2019, 04:12 AM
Last Post by JonPowellDJ
Replies 7
Views 283
10-02-2019, 05:47 AM
Last Post by Sparkystav
Replies 47
Views 1,933
29-01-2019, 02:43 PM
Last Post by DaveEdin
Replies 23
Views 967
19-07-2018, 03:40 AM
Last Post by Carpediem
Replies 9
Views 390
11-07-2018, 03:16 AM
Last Post by JonPowellDJ
Replies 21
Views 848
01-06-2018, 01:11 AM
Last Post by parthiban
Replies 50
Views 2,662
13-01-2018, 09:26 AM
Last Post by Moley