JapCarForum Cars, Cars, Cars! Project Cars Nissan Almera GTi (N15)

Nissan Almera GTi (N15)

Nissan Almera GTi (N15)

Pages (14): Previous 1 2 3 4 514 Next  
Moley
Posting Freak
6,230
03-05-2017, 08:48 AM
#21
So is that darker at the rear Anees ??
Just to clear things up !!

Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Moley
03-05-2017, 08:48 AM #21

So is that darker at the rear Anees ??
Just to clear things up !!


Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice

Fozzy
Posting Freak
1,132
03-05-2017, 09:01 AM
#22
Yeah darker at the rear. The % is the amount of light it lets through, the lower the percentage, the darker the tint

2009 JAE Car Pull Runner Up
2010 JAE Car Pull Failure

My Garage
Fozzy
03-05-2017, 09:01 AM #22

Yeah darker at the rear. The % is the amount of light it lets through, the lower the percentage, the darker the tint


2009 JAE Car Pull Runner Up
2010 JAE Car Pull Failure

My Garage

Chri5
Posting Freak
1,894
03-05-2017, 09:20 AM
#23
Yeah the lower the % the darker it is.
Limo is around 8% but can get 5% iirc
Chri5
03-05-2017, 09:20 AM #23

Yeah the lower the % the darker it is.
Limo is around 8% but can get 5% iirc

N15_GTi
Senior Member
268
03-05-2017, 01:05 PM
#24
Yeh, I have thought about tinting the windows... But there are a few other bits that need to be done first. But I might look at that when I run out of things to do!

Window tints + wind deflectors might be the next stop after my spacers!

The spacers are going to be a pain in the ****, first they need making up, then I need to source longer studs for each hub... Replacing the studs in the hub will be a **** of a job I bet.

But yeh, its all on the list of things to do! Smile
N15_GTi
03-05-2017, 01:05 PM #24

Yeh, I have thought about tinting the windows... But there are a few other bits that need to be done first. But I might look at that when I run out of things to do!

Window tints + wind deflectors might be the next stop after my spacers!

The spacers are going to be a pain in the ****, first they need making up, then I need to source longer studs for each hub... Replacing the studs in the hub will be a **** of a job I bet.

But yeh, its all on the list of things to do! Smile

Fozzy
Posting Freak
1,132
04-05-2017, 12:01 AM
#25
Whats the spec of the spacers? I.e centre bore, pcd, thickness?

2009 JAE Car Pull Runner Up
2010 JAE Car Pull Failure

My Garage
Fozzy
04-05-2017, 12:01 AM #25

Whats the spec of the spacers? I.e centre bore, pcd, thickness?


2009 JAE Car Pull Runner Up
2010 JAE Car Pull Failure

My Garage

N15_GTi
Senior Member
268
04-05-2017, 02:27 AM
#26
PCD = 4x100, CentreBore = 59.1mm, Thickness = 20mm

But on the spacer itself I would ideally need a mounting spiggot to match the internal diameter of my wheels. So the wheel aligns on the spacer properly.

Cheers

Dan
Edited 15-06-2010, 12:07 PM by N15_GTi.
N15_GTi
04-05-2017, 02:27 AM #26

PCD = 4x100, CentreBore = 59.1mm, Thickness = 20mm

But on the spacer itself I would ideally need a mounting spiggot to match the internal diameter of my wheels. So the wheel aligns on the spacer properly.

Cheers

Dan

garyskisplym
Senior Member
714
05-05-2017, 01:10 PM
#27
an i right in thinking the sr20de endine are the same as the engine used in a s14/ s14a (sr20det) without a turbo??

BHP, TORQUE, UNDER STEER, OVERSTEER FOR DUMMYS
BHP- how fast you hit the wall, TORQUE- how far you push the wall
OVER STEER- Dont see the wall, UNDER STEER- You do see it
1999 Blue IS200 SportTRD kit, K&N Filter
garyskisplym
05-05-2017, 01:10 PM #27

an i right in thinking the sr20de endine are the same as the engine used in a s14/ s14a (sr20det) without a turbo??


BHP, TORQUE, UNDER STEER, OVERSTEER FOR DUMMYS
BHP- how fast you hit the wall, TORQUE- how far you push the wall
OVER STEER- Dont see the wall, UNDER STEER- You do see it
1999 Blue IS200 SportTRD kit, K&N Filter

N15_GTi
Senior Member
268
05-05-2017, 11:17 PM
#28
Sort of... Same block and a few other bits but the SR20DET, the 'T' doesn't just mean they have added a turbo... There are a few differences such as, lower compression pistons, variable cam intake timing, oil squirters, bigger injectors....

And in the 200sx, its mounted longertudinally...

That said, there are a fair few variants that I don't know much about - 'Black Top', 'Red Top' 'Silver Top' etc.... I think they are dependant on year of release, each with a different tweak here or there.

SR20DET is also in the Pulsar GTi-R. One of the popular conversions is dropping the Pulsar lump in, or Pulsar parts onto the standard engine - Like the turbo and manifold etc... As its all interchangeable...

But the SR20DE is a sounds engine, bombproof! Its no RB26 but it still does the job Smile
Edited 17-06-2010, 08:53 AM by N15_GTi.
N15_GTi
05-05-2017, 11:17 PM #28

Sort of... Same block and a few other bits but the SR20DET, the 'T' doesn't just mean they have added a turbo... There are a few differences such as, lower compression pistons, variable cam intake timing, oil squirters, bigger injectors....

And in the 200sx, its mounted longertudinally...

That said, there are a fair few variants that I don't know much about - 'Black Top', 'Red Top' 'Silver Top' etc.... I think they are dependant on year of release, each with a different tweak here or there.

SR20DET is also in the Pulsar GTi-R. One of the popular conversions is dropping the Pulsar lump in, or Pulsar parts onto the standard engine - Like the turbo and manifold etc... As its all interchangeable...

But the SR20DE is a sounds engine, bombproof! Its no RB26 but it still does the job Smile

Mikey
Senior Member
714
06-05-2017, 12:23 AM
#29
RB :thumbdown: JZ :thumbup:
Mikey
06-05-2017, 12:23 AM #29

RB :thumbdown: JZ :thumbup:

N15_GTi
Senior Member
268
06-05-2017, 12:49 AM
#30
A thumbs down to an RB, that's a first... Smile

Well anyway, both of them are straight 6 Jap engines.... So you can't go wrong :lol:
N15_GTi
06-05-2017, 12:49 AM #30

A thumbs down to an RB, that's a first... Smile

Well anyway, both of them are straight 6 Jap engines.... So you can't go wrong :lol:

Pages (14): Previous 1 2 3 4 514 Next  
Recently Browsing
 5 Guest(s)
Recently Browsing
 5 Guest(s)
Related Threads…
Replies 6
Views 799
24-04-2023, 02:24 PM
Last Post by Lexuspat
Replies 15
Views 999
30-03-2023, 10:38 AM
Last Post by FOSSIL FUELS
Replies 10
Views 867
18-03-2023, 01:09 PM
Last Post by FOSSIL FUELS
Replies 15
Views 924
09-03-2023, 05:45 AM
Last Post by Rabster
Replies 8
Views 804
02-01-2023, 11:48 AM
Last Post by Lexuspat
Replies 10
Views 987
25-11-2022, 01:49 PM
Last Post by Lexuspat
Replies 3
Views 690
02-03-2022, 03:47 PM
Last Post by Rabster
Replies 25
Views 2,640
21-07-2021, 11:48 PM
Last Post by Rabster
Replies 19
Views 1,231
10-10-2020, 11:18 PM
Last Post by sexttoitami
Replies 102
Views 6,276
10-06-2020, 10:48 AM
Last Post by Sparkystav