JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza Painted my Callipers

Painted my Callipers

Painted my Callipers

Pages (2): 1 2 Next
dodgydave
Senior Member
472
03-05-2017, 11:11 AM
#1
Hi after some deliberation on what colour to paint my callipers I finally made up my mind and over the last two week ends have done it.

I took loads of pictures while doing this and as I had to strip my brakes down to paint the callipers I will probably do a separate thread on dismantling and re-assembling the brakes, if people think it would be of use.

So after much thought on the colour this is what I used.

[Image: 4682328743_a80f29110b_b.jpg]

I started on the back first and after stripping everything down and preparing I was presented with this.

[Image: 4682931330_b146660b47_b.jpg]

I also wanted to paint the hub in the center of the brake disk. These have been renewed some time in the recent past and I wanted to get some paint on the hubs before they got too rusty. I used black Hammerite smooth for this.

The hub before painting.

[Image: 4682279985_d3159c83a8_b.jpg]

The calliper and drum after painting.

[Image: 4682946926_0316ede33b_b.jpg]

PS. I realised after putting the wheels back on that I needed to paint further down the face of the drum so I did that the next day when I put the decals on.

While the paint was drying I decided to give the inside of wheels a clean.

before.

[Image: 4682935284_4cf33c108c_b.jpg]

and after.

[Image: 4682307691_3fa4469163_b.jpg]

I know they weren't too bad but it made me feel better knowing that I'd done them.

and finally, the next day, after putting the decals on.

[Image: 4682338157_54eeff2cb4_b.jpg]

[Image: 4682341691_4dbaa02c6c_b.jpg]

[Image: 4682972706_5f09c99c95_b.jpg]
dodgydave
03-05-2017, 11:11 AM #1

Hi after some deliberation on what colour to paint my callipers I finally made up my mind and over the last two week ends have done it.

I took loads of pictures while doing this and as I had to strip my brakes down to paint the callipers I will probably do a separate thread on dismantling and re-assembling the brakes, if people think it would be of use.

So after much thought on the colour this is what I used.

[Image: 4682328743_a80f29110b_b.jpg]

I started on the back first and after stripping everything down and preparing I was presented with this.

[Image: 4682931330_b146660b47_b.jpg]

I also wanted to paint the hub in the center of the brake disk. These have been renewed some time in the recent past and I wanted to get some paint on the hubs before they got too rusty. I used black Hammerite smooth for this.

The hub before painting.

[Image: 4682279985_d3159c83a8_b.jpg]

The calliper and drum after painting.

[Image: 4682946926_0316ede33b_b.jpg]

PS. I realised after putting the wheels back on that I needed to paint further down the face of the drum so I did that the next day when I put the decals on.

While the paint was drying I decided to give the inside of wheels a clean.

before.

[Image: 4682935284_4cf33c108c_b.jpg]

and after.

[Image: 4682307691_3fa4469163_b.jpg]

I know they weren't too bad but it made me feel better knowing that I'd done them.

and finally, the next day, after putting the decals on.

[Image: 4682338157_54eeff2cb4_b.jpg]

[Image: 4682341691_4dbaa02c6c_b.jpg]

[Image: 4682972706_5f09c99c95_b.jpg]

Sparkystav
Administrator
14,683
03-05-2017, 11:17 AM
#2
Looks good mate!

OutlawJapClub Admin Team
Sparkystav
03-05-2017, 11:17 AM #2

Looks good mate!


OutlawJapClub Admin Team

Lexusboy
Posting Freak
9,267
03-05-2017, 11:18 AM
#3
Dave that the best colour ops its because i have that colour tooSmile
Lexusboy
03-05-2017, 11:18 AM #3

Dave that the best colour ops its because i have that colour tooSmile

dodgydave
Senior Member
472
03-05-2017, 11:25 AM
#4
Right and this week end it was time to do the fronts.

[Image: 4700796490_b4d990c916_b.jpg]

To be honest these look like they've been painted before, at least the front part.

I removed everything, of cause with the fronts you can take part of the calliper off (I don't know what you call it).

[Image: 4700814020_c193d32ba1_b.jpg]

and after cleaning up.

[Image: 4700828272_b8f70e67e3_b.jpg]

and then painting

[Image: 4700829422_a77d65a20f_b.jpg]

[Image: 4700834868_379679f82b_b.jpg]

after putting everything back together

[Image: 4700791502_97c012eea8_b.jpg]

and finally after applying the decals

[Image: 4700848586_bce9ec7f8b_b.jpg]

[Image: 4700221401_b2de4569b8_b.jpg]

All in all not looking too bad.

As I said at the beginning I did take a lot of pictures during stipping down and re-assembling the brakes so I might do a walk-through if it would be of interest.

Dave :wink:
dodgydave
03-05-2017, 11:25 AM #4

Right and this week end it was time to do the fronts.

[Image: 4700796490_b4d990c916_b.jpg]

To be honest these look like they've been painted before, at least the front part.

I removed everything, of cause with the fronts you can take part of the calliper off (I don't know what you call it).

[Image: 4700814020_c193d32ba1_b.jpg]

and after cleaning up.

[Image: 4700828272_b8f70e67e3_b.jpg]

and then painting

[Image: 4700829422_a77d65a20f_b.jpg]

[Image: 4700834868_379679f82b_b.jpg]

after putting everything back together

[Image: 4700791502_97c012eea8_b.jpg]

and finally after applying the decals

[Image: 4700848586_bce9ec7f8b_b.jpg]

[Image: 4700221401_b2de4569b8_b.jpg]

All in all not looking too bad.

As I said at the beginning I did take a lot of pictures during stipping down and re-assembling the brakes so I might do a walk-through if it would be of interest.

Dave :wink:

DaveEdin
Posting Freak
5,657
03-05-2017, 11:29 AM
#5
Looks great Dave... I'll look forward to the walkthrough for one! :thumbup:
DaveEdin
03-05-2017, 11:29 AM #5

Looks great Dave... I'll look forward to the walkthrough for one! :thumbup:

spikes
Posting Freak
1,153
03-05-2017, 11:39 AM
#6
looks good dave,just need to keep them clean now:lol: :biggrin:

spikes
spikes
03-05-2017, 11:39 AM #6

looks good dave,just need to keep them clean now:lol: :biggrin:


spikes

James S
Posting Freak
1,240
03-05-2017, 11:50 AM
#7
Thats wicked mate, :w00t:
Proper quality job!
James S
03-05-2017, 11:50 AM #7

Thats wicked mate, :w00t:
Proper quality job!

Lexusboy
Posting Freak
9,267
03-05-2017, 11:56 AM
#8
Mine still look good after two years and your done a better job than i so you're should last longer:wink:

Dave we like your walk through's
Lexusboy
03-05-2017, 11:56 AM #8

Mine still look good after two years and your done a better job than i so you're should last longer:wink:

Dave we like your walk through's

Lexuspat
Administrator
6,827
03-05-2017, 12:34 PM
#9
looks good

[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team
Lexuspat
03-05-2017, 12:34 PM #9

looks good


[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team

valo
Member
99
03-05-2017, 12:48 PM
#10
looking good, I like these DIY mods, and looks so effective.

Mitsubishi Lancer Evolution X GSR SST FQ-300 (White Pearlescent)
[Image: sm78015.jpg]
valo
03-05-2017, 12:48 PM #10

looking good, I like these DIY mods, and looks so effective.


Mitsubishi Lancer Evolution X GSR SST FQ-300 (White Pearlescent)
[Image: sm78015.jpg]

Pages (2): 1 2 Next
Recently Browsing
 2 Guest(s)
Recently Browsing
 2 Guest(s)
Related Threads…
Replies 7
Views 471
30-04-2018, 10:17 AM
Last Post by nathjh
Replies 3
Views 368
26-11-2017, 01:06 PM
Last Post by dimis
Replies 20
Views 926
11-12-2016, 12:47 PM
Last Post by Rabster