JapCarForum Club Sponsor Invisible Touch Detailing Ford Focus ST3

Ford Focus ST3

Ford Focus ST3

Pages (2): 1 2 Next
Invisible Touch Detailing
Senior Member
Website Find
423
06-05-2017, 01:00 AM
#1
Hi guys,

A rather proud owner of this ST3 contacted me and asked what could be done with the swirl marks he had noticed in sunlight, the graphics were also quite faded, swirled and covered in water marks. Which together was generally letting the vehicle down.

So we agreed on a stage 1 paint correction and engine bay treatment. The idea of this service is not full paint correction but to vastly improve the appearance of light scratches and swirl marks as well as getting a fresh, vibrant finish to the paintwork.

The journey to the owner began and this was the car on arrival...

[Image: P1050385.jpg]

[Image: P1050386.jpg]

[Image: P1050387.jpg]

[Image: P1050388.jpg]

[Image: P1050389.jpg]

[Image: P1050390.jpg]

[Image: P1050391.jpg]

[Image: P1050392.jpg]

[Image: P1050393.jpg]

[Image: P1050395.jpg]

[Image: P1050396.jpg]

[Image: P1050397.jpg]

[Image: P1050398.jpg]

[Image: P1050399.jpg]

[Image: P1050400.jpg]

[Image: P1050401.jpg]

[Image: P1050402.jpg]

[Image: P1050403.jpg]

[Image: P1050404.jpg]

[Image: P1050405.jpg]
Reply
Reply
Invisible Touch Detailing
06-05-2017, 01:00 AM #1

Hi guys,

A rather proud owner of this ST3 contacted me and asked what could be done with the swirl marks he had noticed in sunlight, the graphics were also quite faded, swirled and covered in water marks. Which together was generally letting the vehicle down.

So we agreed on a stage 1 paint correction and engine bay treatment. The idea of this service is not full paint correction but to vastly improve the appearance of light scratches and swirl marks as well as getting a fresh, vibrant finish to the paintwork.

The journey to the owner began and this was the car on arrival...

[Image: P1050385.jpg]

[Image: P1050386.jpg]

[Image: P1050387.jpg]

[Image: P1050388.jpg]

[Image: P1050389.jpg]

[Image: P1050390.jpg]

[Image: P1050391.jpg]

[Image: P1050392.jpg]

[Image: P1050393.jpg]

[Image: P1050395.jpg]

[Image: P1050396.jpg]

[Image: P1050397.jpg]

[Image: P1050398.jpg]

[Image: P1050399.jpg]

[Image: P1050400.jpg]

[Image: P1050401.jpg]

[Image: P1050402.jpg]

[Image: P1050403.jpg]

[Image: P1050404.jpg]

[Image: P1050405.jpg]

Reply
Reply
Invisible Touch Detailing
Senior Member
Website Find
423
06-05-2017, 01:00 AM
#2
[Image: P1050406.jpg]

First off the wheels were jet washed off, sprayed with bilberry and aggitated with a selection of brushes

[Image: P1050407.jpg]

[Image: P1050408.jpg]

The engine bay was rinsed down, sprayed with APC and everywhere was degreased. This was to be dressed later on

[Image: P1050423.jpg]

[Image: P1050424.jpg]

[Image: P1050425.jpg]

[Image: P1050426.jpg]

[Image: P1050427.jpg]

[Image: P1050428.jpg]

[Image: P1050429.jpg]

[Image: P1050431.jpg]

The vehicle was then snowfoamed

[Image: P1050409.jpg]

[Image: P1050410.jpg]

It was then washed using the 2 bucket method and shampoo plus solution. Fine brushes were used to clean the harder to reach areas

[Image: P1050411.jpg]

[Image: P1050412.jpg]

[Image: P1050413.jpg]

[Image: P1050414.jpg]

[Image: P1050415.jpg]

[Image: P1050417.jpg]

[Image: P1050416.jpg]
Reply
Reply
Invisible Touch Detailing
06-05-2017, 01:00 AM #2

[Image: P1050406.jpg]

First off the wheels were jet washed off, sprayed with bilberry and aggitated with a selection of brushes

[Image: P1050407.jpg]

[Image: P1050408.jpg]

The engine bay was rinsed down, sprayed with APC and everywhere was degreased. This was to be dressed later on

[Image: P1050423.jpg]

[Image: P1050424.jpg]

[Image: P1050425.jpg]

[Image: P1050426.jpg]

[Image: P1050427.jpg]

[Image: P1050428.jpg]

[Image: P1050429.jpg]

[Image: P1050431.jpg]

The vehicle was then snowfoamed

[Image: P1050409.jpg]

[Image: P1050410.jpg]

It was then washed using the 2 bucket method and shampoo plus solution. Fine brushes were used to clean the harder to reach areas

[Image: P1050411.jpg]

[Image: P1050412.jpg]

[Image: P1050413.jpg]

[Image: P1050414.jpg]

[Image: P1050415.jpg]

[Image: P1050417.jpg]

[Image: P1050416.jpg]

Reply
Reply
Invisible Touch Detailing
Senior Member
Website Find
423
06-05-2017, 01:02 AM
#3
After this the ST was clayed. The owner had briefly done some claying before on another vehicle but was not comfortable doing so and therefore stopped. This seemed a perfect time to give a quick lesson in claying and the owner happily clayed half the bonnet. Although the vehicle was very clean from contamination due to its very low mileage, this will hopefully give him the confidence to tackle this task in the future should he need to

[Image: P1050418.jpg]

It was then washed again and jetwashed off. We were now left with this

[Image: P1050419.jpg]

[Image: P1050420.jpg]

[Image: P1050421.jpg]

[Image: P1050422.jpg]

At this point the sun was coming down so we moved into the garage to continue the session

[Image: P1050432.jpg]

The vehicle was machine polished with a makita rotary, 3m polishing pads and menzerna 106fa. Starting on the drivers door. The paint was inspected under led and halogen lighting

[Image: P1050433.jpg]

[Image: P1050434.jpg]

[Image: P1050435.jpg]

[Image: P1050436.jpg]

[Image: P1050437.jpg]

[Image: P1050438.jpg]

[Image: P1050439.jpg]

[Image: P1050441.jpg]

[Image: P1050443.jpg]

Some left side bonnet shots before polishing

[Image: P1050444.jpg]

[Image: P1050447.jpg]

And the right hand side after correction

[Image: P1050448.jpg]

[Image: P1050454.jpg]

[Image: P1050450.jpg]
Reply
Reply
Invisible Touch Detailing
06-05-2017, 01:02 AM #3

After this the ST was clayed. The owner had briefly done some claying before on another vehicle but was not comfortable doing so and therefore stopped. This seemed a perfect time to give a quick lesson in claying and the owner happily clayed half the bonnet. Although the vehicle was very clean from contamination due to its very low mileage, this will hopefully give him the confidence to tackle this task in the future should he need to

[Image: P1050418.jpg]

It was then washed again and jetwashed off. We were now left with this

[Image: P1050419.jpg]

[Image: P1050420.jpg]

[Image: P1050421.jpg]

[Image: P1050422.jpg]

At this point the sun was coming down so we moved into the garage to continue the session

[Image: P1050432.jpg]

The vehicle was machine polished with a makita rotary, 3m polishing pads and menzerna 106fa. Starting on the drivers door. The paint was inspected under led and halogen lighting

[Image: P1050433.jpg]

[Image: P1050434.jpg]

[Image: P1050435.jpg]

[Image: P1050436.jpg]

[Image: P1050437.jpg]

[Image: P1050438.jpg]

[Image: P1050439.jpg]

[Image: P1050441.jpg]

[Image: P1050443.jpg]

Some left side bonnet shots before polishing

[Image: P1050444.jpg]

[Image: P1050447.jpg]

And the right hand side after correction

[Image: P1050448.jpg]

[Image: P1050454.jpg]

[Image: P1050450.jpg]

Reply
Reply
Invisible Touch Detailing
Senior Member
Website Find
423
06-05-2017, 01:02 AM
#4
[Image: P1050452.jpg]

[Image: P1050451.jpg]

[Image: P1050453.jpg]

Working down the vehicle

[Image: P1050456.jpg]

[Image: P1050459.jpg]

Moving round to the boot, switching to a 3m polishing spot pad. This was the difference in the stripes after polishing

[Image: P1050460.jpg]

[Image: P1050461.jpg]

Due to the small garage size, the vehicle was turned round and i continued on the rear wing

[Image: P1050464.jpg]

[Image: P1050465.jpg]

The arch had not yet been done in this pic

[Image: P1050467.jpg]

[Image: P1050468.jpg]

The stripes on the bonnet were treated with the same process

[Image: P1050469.jpg]

[Image: P1050470.jpg]

And continuing down the side of the vehicle

[Image: P1050471.jpg]

[Image: P1050473.jpg]

[Image: P1050475.jpg]

All shuts were dusted down and all rubbers and plastics in the engine bay were treated with aerospace 303

[Image: P1050476.jpg]

[Image: P1050477.jpg]

[Image: P1050478.jpg]

[Image: P1050479.jpg]
Reply
Reply
Invisible Touch Detailing
06-05-2017, 01:02 AM #4

[Image: P1050452.jpg]

[Image: P1050451.jpg]

[Image: P1050453.jpg]

Working down the vehicle

[Image: P1050456.jpg]

[Image: P1050459.jpg]

Moving round to the boot, switching to a 3m polishing spot pad. This was the difference in the stripes after polishing

[Image: P1050460.jpg]

[Image: P1050461.jpg]

Due to the small garage size, the vehicle was turned round and i continued on the rear wing

[Image: P1050464.jpg]

[Image: P1050465.jpg]

The arch had not yet been done in this pic

[Image: P1050467.jpg]

[Image: P1050468.jpg]

The stripes on the bonnet were treated with the same process

[Image: P1050469.jpg]

[Image: P1050470.jpg]

And continuing down the side of the vehicle

[Image: P1050471.jpg]

[Image: P1050473.jpg]

[Image: P1050475.jpg]

All shuts were dusted down and all rubbers and plastics in the engine bay were treated with aerospace 303

[Image: P1050476.jpg]

[Image: P1050477.jpg]

[Image: P1050478.jpg]

[Image: P1050479.jpg]

Reply
Reply
Invisible Touch Detailing
Senior Member
Website Find
423
06-05-2017, 01:02 AM
#5
[Image: P1050480.jpg]

Any external plastics and trim were treated with bumper care

[Image: P1050483.jpg]

[Image: P1050490.jpg]

The wheels were sealed with poorboys wheel sealant and tyres dressed with endurance tyre gel.
The headlights and windows were polished by hand.
The interior was hoovered and dash wiped down with natural look.
The exhausts were polished with nxt.
After machine polishing, the paintwork was treated with lime prime lite pre wax cleanser and 1 application of victoria concourse wax.
The Invisible Touch Detailing service book was filled out to become part of the owners records.

These were the final pictures kindly provided by the owner the following day

[Image: DSC_0135.jpg]

[Image: DSC_0144.jpg]

[Image: DSC_0146.jpg]

[Image: DSC_0154.jpg]

[Image: DSC_0155.jpg]

[Image: DSC_0157.jpg]

[Image: DSC_0160.jpg]

[Image: DSC_0161.jpg]

[Image: DSC_0163.jpg]

[Image: DSC_0164.jpg]

[Image: DSC_0175.jpg]

[Image: DSC_0176.jpg]

[Image: DSC_0181.jpg]

[Image: DSC_0190.jpg]

Thanks for looking Smile

Christian
Reply
Reply
Invisible Touch Detailing
06-05-2017, 01:02 AM #5

[Image: P1050480.jpg]

Any external plastics and trim were treated with bumper care

[Image: P1050483.jpg]

[Image: P1050490.jpg]

The wheels were sealed with poorboys wheel sealant and tyres dressed with endurance tyre gel.
The headlights and windows were polished by hand.
The interior was hoovered and dash wiped down with natural look.
The exhausts were polished with nxt.
After machine polishing, the paintwork was treated with lime prime lite pre wax cleanser and 1 application of victoria concourse wax.
The Invisible Touch Detailing service book was filled out to become part of the owners records.

These were the final pictures kindly provided by the owner the following day

[Image: DSC_0135.jpg]

[Image: DSC_0144.jpg]

[Image: DSC_0146.jpg]

[Image: DSC_0154.jpg]

[Image: DSC_0155.jpg]

[Image: DSC_0157.jpg]

[Image: DSC_0160.jpg]

[Image: DSC_0161.jpg]

[Image: DSC_0163.jpg]

[Image: DSC_0164.jpg]

[Image: DSC_0175.jpg]

[Image: DSC_0176.jpg]

[Image: DSC_0181.jpg]

[Image: DSC_0190.jpg]

Thanks for looking Smile

Christian

Reply
Reply
SHAHZ
Posting Freak
Find
2,142
06-05-2017, 01:13 AM
#6
Very nice work, so this was a mobile job then!:thumbup1:
Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
Reply
Reply
SHAHZ
06-05-2017, 01:13 AM #6

Very nice work, so this was a mobile job then!:thumbup1:

Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R

Reply
Reply
Invisible Touch Detailing
Senior Member
Website Find
423
06-05-2017, 01:15 AM
#7
Thanks Gord Smile no orange ones yet no, only done 1 other of these and that was also white.


I'm sure with quite a few extras you could make full use of the speedo lol Smile

Yes Shahz, trip do Didcot for this one
Reply
Reply
Invisible Touch Detailing
06-05-2017, 01:15 AM #7

Thanks Gord Smile no orange ones yet no, only done 1 other of these and that was also white.


I'm sure with quite a few extras you could make full use of the speedo lol Smile

Yes Shahz, trip do Didcot for this one

Reply
Reply
Lexusboy
Posting Freak
Website Find
9,267
06-05-2017, 01:20 AM
#8
Another nice Job Christian..

What product do you use to de grease the engine bay?
Reply
Reply
Lexusboy
06-05-2017, 01:20 AM #8

Another nice Job Christian..

What product do you use to de grease the engine bay?

Reply
Reply
SHAHZ
Posting Freak
Find
2,142
06-05-2017, 01:23 AM
#9
Lexusboy Another nice Job Christian..

What product do you use to de grease the engine bay?

id like to know too, and what needs to be covered when rinsing??
Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
Reply
Reply
SHAHZ
06-05-2017, 01:23 AM #9

Lexusboy Another nice Job Christian..

What product do you use to de grease the engine bay?

id like to know too, and what needs to be covered when rinsing??

Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R

Reply
Reply
Asi
Posting Freak
Find
2,510
06-05-2017, 01:28 AM
#10
looks very nice mate
[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]
Reply
Reply
Asi
06-05-2017, 01:28 AM #10

looks very nice mate

[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]

Reply
Reply
Pages (2): 1 2 Next
Recently Browsing
 8 Guest(s)
Recently Browsing
 8 Guest(s)
Related Threads…
Ford Focus RS
by Invisible Touch Detailing
Replies 2
Views 184
05-11-2019, 04:59 AM
Last Post by Bassline