JapCarForum General Discussions The JCF Lounge My Turn

My Turn

My Turn

Pages (7): 1 2 3 4 57 Next  
Fry-Up
Posting Freak
891
24-06-2017, 01:32 PM
#1
Fluffed it today

[Image: IMG00015-20100805-2021.jpg]

the only actual part I need to replace appears to be the bonnet,

the bumper and grille survived with only scratches, long and short of it was the guy stopped sharper than I did, cos I wasn't looking when he braked, I was only doin about 15, prob 10 or less when I connected tho

damage to other car was scratches only so hoping to just pay his repair and avoid insurance, i've had a really good year so far so somethin was bound to give, but the guy seemed really good about it and i'm gonna pop round 2moro as he's local and we're both off work 2moro

Never mind tho, could have been much worse but thats what happens when u break concentration for only a second

Lesson Learned
Fry-Up
24-06-2017, 01:32 PM #1

Fluffed it today

[Image: IMG00015-20100805-2021.jpg]

the only actual part I need to replace appears to be the bonnet,

the bumper and grille survived with only scratches, long and short of it was the guy stopped sharper than I did, cos I wasn't looking when he braked, I was only doin about 15, prob 10 or less when I connected tho

damage to other car was scratches only so hoping to just pay his repair and avoid insurance, i've had a really good year so far so somethin was bound to give, but the guy seemed really good about it and i'm gonna pop round 2moro as he's local and we're both off work 2moro

Never mind tho, could have been much worse but thats what happens when u break concentration for only a second

Lesson Learned

Fozzy
Posting Freak
1,132
24-06-2017, 01:35 PM
#2
Ahh no way mate, thats just bad luck. Never like to see a damaged car, specially not a scarletti red IS.

As for damage it will have pushed the slam panel back as well. I would say the headlight brackets have snapped, but they can be araldited back for a quick fix. Slam panel should pull out hopefully.

2009 JAE Car Pull Runner Up
2010 JAE Car Pull Failure

My Garage
Fozzy
24-06-2017, 01:35 PM #2

Ahh no way mate, thats just bad luck. Never like to see a damaged car, specially not a scarletti red IS.

As for damage it will have pushed the slam panel back as well. I would say the headlight brackets have snapped, but they can be araldited back for a quick fix. Slam panel should pull out hopefully.


2009 JAE Car Pull Runner Up
2010 JAE Car Pull Failure

My Garage

SHAHZ
Posting Freak
2,142
24-06-2017, 01:38 PM
#3
gutted for you mate, as Pete says i would have expected a few brackets to have broken, hope you manage to get it all sorted quickly and easily

Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
SHAHZ
24-06-2017, 01:38 PM #3

gutted for you mate, as Pete says i would have expected a few brackets to have broken, hope you manage to get it all sorted quickly and easily


Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R

Fry-Up
Posting Freak
891
24-06-2017, 01:38 PM
#4
i'll have a proper look 2moro, but the bumper and headlights still fit perfectly flush with the wings, the bonnet won't release at the moment tho
Fry-Up
24-06-2017, 01:38 PM #4

i'll have a proper look 2moro, but the bumper and headlights still fit perfectly flush with the wings, the bonnet won't release at the moment tho

DaveEdin
Posting Freak
5,657
24-06-2017, 01:38 PM
#5
Sad Bummer Rory, that sucks big time!

Hope you get everything sorted ASAP, cos a bumped IS just looks sore...
DaveEdin
24-06-2017, 01:38 PM #5

Sad Bummer Rory, that sucks big time!

Hope you get everything sorted ASAP, cos a bumped IS just looks sore...

Moley
Posting Freak
6,230
24-06-2017, 01:38 PM
#6
thats bad luck mate, lets hope you can find a cheap bonnet

Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Moley
24-06-2017, 01:38 PM #6

thats bad luck mate, lets hope you can find a cheap bonnet


Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice

Fry-Up
Posting Freak
891
24-06-2017, 01:39 PM
#7
my priority lies with sortin the other guys bumper, just paid out tax and insurance so i'm just gonna slap a straight bonnet on mine til I got the funds to do a proper job, lol
Fry-Up
24-06-2017, 01:39 PM #7

my priority lies with sortin the other guys bumper, just paid out tax and insurance so i'm just gonna slap a straight bonnet on mine til I got the funds to do a proper job, lol

Moley
Posting Freak
6,230
24-06-2017, 01:40 PM
#8
there is one on ebay for £50 but it has a bit of a dent in it

Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Moley
24-06-2017, 01:40 PM #8

there is one on ebay for £50 but it has a bit of a dent in it


Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice

Lexusboy
Posting Freak
9,267
24-06-2017, 01:48 PM
#9
Sorry to see the damage to your car.

Hope your not done any more damage other than the bonnet
Lexusboy
24-06-2017, 01:48 PM #9

Sorry to see the damage to your car.

Hope your not done any more damage other than the bonnet

Sparkystav
Administrator
14,683
24-06-2017, 02:07 PM
#10
Gutted for you mate, hope its sorted ASAP

OutlawJapClub Admin Team
Sparkystav
24-06-2017, 02:07 PM #10

Gutted for you mate, hope its sorted ASAP


OutlawJapClub Admin Team

Pages (7): 1 2 3 4 57 Next  
Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 37
Views 1,604
11-06-2018, 05:35 AM
Last Post by Stoney
Replies 18
Views 730
02-09-2017, 05:31 AM
Last Post by garyskisplym
Replies 4
Views 283
04-06-2016, 05:43 AM
Last Post by steviewevie