My new toys
My new toys
At the time I am happy with the induction kit. I also managed to get some radiator silicone hoses (from Bobby :thumbup, which actually I am not sure where all of them fit. I also purchased a Tom's radiator from ******, which is fantastic! And lastly I got an Autometer triple gauge pod, which i will alter a bit to fit in the center of the dash.More upgrade parts from USA (They are still in Athens Customs!!!:angry, will be fitted on the car soon
![[Image: imgp0589l.jpg]](http://img16.imageshack.us/img16/1373/imgp0589l.jpg)
![[Image: imgp0592y.jpg]](http://img17.imageshack.us/img17/43/imgp0592y.jpg)
![[Image: imgp0591c.jpg]](http://img21.imageshack.us/img21/4944/imgp0591c.jpg)
LEXUS IS200 - The most fun car to go sideways
Here are some more toys that I will fit soon. I mamaged to get a TTE airbox in perfect condition, which I will fit sometime in the future. (Thanks Bobby :thumbup1At the time I am happy with the induction kit. I also managed to get some radiator silicone hoses (from Bobby :thumbup, which actually I am not sure where all of them fit. I also purchased a Tom's radiator from ******, which is fantastic! And lastly I got an Autometer triple gauge pod, which i will alter a bit to fit in the center of the dash.More upgrade parts from USA (They are still in Athens Customs!!!:angry, will be fitted on the car soon
LEXUS IS200 - The most fun car to go sideways
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
14-06-2016, 08:16 AM #2Nice :thumbup:
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
![[Image: fittingsc260507.jpg]](http://img13.imageshack.us/img13/5492/fittingsc260507.jpg)
In this one you can see the larger diameter upper radiator hose at the front right of the picture.
You can see the other 2 hoses to the extreme left attached to the reservoir. Ignore the one at the very back of the engine bay, the mechanic made a mistake in that one !!!:cursing:
![[Image: cimg0256d.jpg]](http://img187.imageshack.us/img187/6005/cimg0256d.jpg)
In this on you can see the two reservoir hoses at the front.
The larger diameter & longer radiator hose fits at the bottom of the rad so you dont really see this one. So you have two rads hoses, two reservoir hoses (fitted over the blue induction pipe) & I have not got a clue :confused1: about the last, think it is a "spare" reservoir hose !!
Hope this helps Dimis.
Cheers
Bobby
Shy boys don't get sweeties.
Here you go
In this one you can see the larger diameter upper radiator hose at the front right of the picture.
You can see the other 2 hoses to the extreme left attached to the reservoir. Ignore the one at the very back of the engine bay, the mechanic made a mistake in that one !!!:cursing:
In this on you can see the two reservoir hoses at the front.
The larger diameter & longer radiator hose fits at the bottom of the rad so you dont really see this one. So you have two rads hoses, two reservoir hoses (fitted over the blue induction pipe) & I have not got a clue :confused1: about the last, think it is a "spare" reservoir hose !!
Hope this helps Dimis.
Cheers
Bobby
Shy boys don't get sweeties.
Bobby The larger diameter & longer radiator hose fits at the bottom of the rad so you dont really see this one. So you have two rads hoses, two reservoir hoses (fitted over the blue induction pipe) & I have not got a clue :confused1: about the last, think it is a "spare" reservoir hose !!There are supposed to be four of the smaller diameter hoses in the kit. So as well as the two power steering hoses, are the other two perhaps for the heater hoses at the back of the engine bay (where you say one is fitted by "mistake") ?
Unless they are two more power steering hoses ? Looking at this diagram, there do seem to be four power steering hoses.
I'm only guessing here, not sure where they're supposed to fit.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
15-06-2016, 04:04 AM #9Bobby The larger diameter & longer radiator hose fits at the bottom of the rad so you dont really see this one. So you have two rads hoses, two reservoir hoses (fitted over the blue induction pipe) & I have not got a clue :confused1: about the last, think it is a "spare" reservoir hose !!There are supposed to be four of the smaller diameter hoses in the kit. So as well as the two power steering hoses, are the other two perhaps for the heater hoses at the back of the engine bay (where you say one is fitted by "mistake") ?
Unless they are two more power steering hoses ? Looking at this diagram, there do seem to be four power steering hoses.
I'm only guessing here, not sure where they're supposed to fit.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
but you are right in what you say a kit comes with six hoses & costs a lot of dosh.
Cheers
Bobby
Shy boys don't get sweeties.
This was only part of a kit / bits left over from other kits hence I sold it to Dimis at much cheapness, on the understanding that the rad hoses will fit & if he can get any luck fitting the others it was a bonus.
but you are right in what you say a kit comes with six hoses & costs a lot of dosh.
Cheers
Bobby
Shy boys don't get sweeties.
9 Guest(s)
9 Guest(s)