New wheels-inmotion centre open day meet
New wheels-inmotion centre open day meet
After we forged a totally new experience for those seeking Alignment/ Geometry/ Tyres using some of the best equipment, staff and knowledge in our Chesham centre, it seemed logical to expand on this experience and go bigger, longer, wider and higher..... So we have.
Wheels-inmotion and BlackBoots new centre in Milton Keynes offers the following in it's 32,000sq ft, five story building
* Geometry calibration encompassing set-ups for domestic/ modified and race cars
* Handling/ tyre wear solutions
* Impact triangulation to identify damaged components
* Pre-purchase approval.... This identifies a damaged chassis before you hand over your money
* Suspension supply and calibration
* Brake service or up-grades
* Exhaust fitting
* Fitting your own parts is not a problem
In addition
* Tyre sales that can retail at online prices
* Tyres for Fiesta to Ferrari, Zafira to Zonda, if it's not in stock we will find it wherever in the World
* In the event you find tyres cheaper than we can supply ( which i doubt ) we will still fit them for you
* Laser driven tyre fitting machines that ( cannot damage your wheel )
* Dye-less wheel balance mounting for balance perfection with a printout to prove it
* Nitrogen inflation costing you a cool £0
In addition to the addition
* Wheel sales
* Wheel welding
* Wheel re-shaping
* Wheel re-refurbishment, using a fully automated, one of a kind machine in the world able to prefect 300 wheels a day ISO9000 compliant
* Wheel diamond cutting
* Custom colour coding/ change/ paint or powder, including partial diamond cut
* Milling to correct off-sets
* Billet milling... Wheel not avalible in your size? Then we will make it
About the open day
* Starts 10am till around 2pm, probably 4pm if past meets are to go by
* Hot food/ refreshments on site... I will bung £150 to the cook for you, after that you pay
* The entire experience is a "show and tell", so enjoy a meet on us
* We will have many exotic cars on site. In house we have two Xbow's, a Radical and a works Megane.. Not the Magan actually because it had a bit of a roll at Silverstone last week?
* Our race cars from BDC/ TA/ TS/ Ma5da on track will attend subject to race commitments
* The Maxxis girls will be with us for some eye candy and a few motor mags
Location
* Atomic Wheels building
Unit 9 Northfield Drive
Milton Keynes
Buckinghamshire
MK15 0DQ
UK
Please note our signage will not be up by the 03/06/12 so you need to look for the Atomic signage
To the clubs/ forums
* Everyone is welcome, but in case i miss the thread can Admin/ mods please give me a heads up on numbers
Future club/ forum meets
* Wheels-inmotion/ BlackBoots do hold meets for individual clubs. These meets are free and follow a similar train as the open day. Those that would like a marque specific meet at Milton Keynes please contact me at [email protected]
Further reading about wheels-inmotion can be found here
* http://www.wheels-inmotion.co.uk/index.php
Past meets here
* http://www.wheels-inmotion.co.uk/simplegallery.php
Thank you for your attention and look forward to seeing you on the 03/ 06/ 12
Regards
Tony@ wim
wheels-inmotion
01-04-2019, 08:57 AM #1We take great pleasure in inviting members/ guests to the Wheels-inmotion and sister company BlackBoots grand opening of the new Milton Keynes centre.
After we forged a totally new experience for those seeking Alignment/ Geometry/ Tyres using some of the best equipment, staff and knowledge in our Chesham centre, it seemed logical to expand on this experience and go bigger, longer, wider and higher..... So we have.
Wheels-inmotion and BlackBoots new centre in Milton Keynes offers the following in it's 32,000sq ft, five story building
* Geometry calibration encompassing set-ups for domestic/ modified and race cars
* Handling/ tyre wear solutions
* Impact triangulation to identify damaged components
* Pre-purchase approval.... This identifies a damaged chassis before you hand over your money
* Suspension supply and calibration
* Brake service or up-grades
* Exhaust fitting
* Fitting your own parts is not a problem
In addition
* Tyre sales that can retail at online prices
* Tyres for Fiesta to Ferrari, Zafira to Zonda, if it's not in stock we will find it wherever in the World
* In the event you find tyres cheaper than we can supply ( which i doubt ) we will still fit them for you
* Laser driven tyre fitting machines that ( cannot damage your wheel )
* Dye-less wheel balance mounting for balance perfection with a printout to prove it
* Nitrogen inflation costing you a cool £0
In addition to the addition
* Wheel sales
* Wheel welding
* Wheel re-shaping
* Wheel re-refurbishment, using a fully automated, one of a kind machine in the world able to prefect 300 wheels a day ISO9000 compliant
* Wheel diamond cutting
* Custom colour coding/ change/ paint or powder, including partial diamond cut
* Milling to correct off-sets
* Billet milling... Wheel not avalible in your size? Then we will make it
About the open day
* Starts 10am till around 2pm, probably 4pm if past meets are to go by
* Hot food/ refreshments on site... I will bung £150 to the cook for you, after that you pay
* The entire experience is a "show and tell", so enjoy a meet on us
* We will have many exotic cars on site. In house we have two Xbow's, a Radical and a works Megane.. Not the Magan actually because it had a bit of a roll at Silverstone last week?
* Our race cars from BDC/ TA/ TS/ Ma5da on track will attend subject to race commitments
* The Maxxis girls will be with us for some eye candy and a few motor mags
Location
* Atomic Wheels building
Unit 9 Northfield Drive
Milton Keynes
Buckinghamshire
MK15 0DQ
UK
Please note our signage will not be up by the 03/06/12 so you need to look for the Atomic signage
To the clubs/ forums
* Everyone is welcome, but in case i miss the thread can Admin/ mods please give me a heads up on numbers
Future club/ forum meets
* Wheels-inmotion/ BlackBoots do hold meets for individual clubs. These meets are free and follow a similar train as the open day. Those that would like a marque specific meet at Milton Keynes please contact me at [email protected]
Further reading about wheels-inmotion can be found here
* http://www.wheels-inmotion.co.uk/index.php
Past meets here
* http://www.wheels-inmotion.co.uk/simplegallery.php
Thank you for your attention and look forward to seeing you on the 03/ 06/ 12
Regards
Tony@ wim
el_bandido
01-04-2019, 09:01 AM #2That's fantastic, I can get my wheel alignment done even closer now 
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
I'm needing a full alignment as well... Handy, since I'm now working near enough... :biggrin:
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
wheels-inmotion
01-04-2019, 09:19 AM #4Team up and come to the open day.... Loads of car porn on site, and totty to enjoy, plus £150 of my money behind the burger bar.... What could be better?
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
01-04-2019, 10:23 AM #5Be rude not to come down.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
I will be there tony I'm sure the outlaws won't dissapoint in numbers lets me know if the club can do anything to help on the day we have marquees we can bring along of you fancy
el_bandido
01-04-2019, 11:02 AM #7Oh hells yeah, I am there don't worry about that. Need to get that rear bushing sorted beforehand... don't want to spend moneys on the alignment and then have to do it all over again
sprinter2012
01-04-2019, 12:04 PM #8I'll definitely be paying a visit, I'll be wanting a geo check after I fit my coilies
wheels-inmotion Team up and come to the open day.... Loads of car porn on site, and totty to enjoy, plus £150 of my money behind the burger bar.... What could be better?
It's a grand idea but on that date I'll be a few hundred miles away from Milton Keynes :lol: I'll aim for a visit shortly after opening day (I'm only "local"to the area during the working week you see)
:thumbup:
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
wheels-inmotion Team up and come to the open day.... Loads of car porn on site, and totty to enjoy, plus £150 of my money behind the burger bar.... What could be better?
It's a grand idea but on that date I'll be a few hundred miles away from Milton Keynes :lol: I'll aim for a visit shortly after opening day (I'm only "local"to the area during the working week you see)
:thumbup:
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
* Free set of wheels
* Free set of tyres
* Free wheel refurbishment
* Free Geometry calibration
* Free Willy
Forget about the "Free Willy" that just fell in :biggrin:
To be confirmed but i cannot see a problem.... So enjoy.
wheels-inmotion
01-04-2019, 11:18 PM #10I'm working a few raffles for the day....
* Free set of wheels
* Free set of tyres
* Free wheel refurbishment
* Free Geometry calibration
* Free Willy
Forget about the "Free Willy" that just fell in :biggrin:
To be confirmed but i cannot see a problem.... So enjoy.
1 Guest(s)
1 Guest(s)
Views 13,648
Last Post by
Views 346
Last Post by
Views 1,772
Last Post by
Views 192
Last Post by
Views 175
Last Post by
Views 548
Last Post by
Views 250
Last Post by
Views 464
Last Post by