Blowing my V8!
Blowing my V8!
Dear old Dyna my V8 soarer is in the process of having an Eaton M112 supercharger fitted, im not rushing it as i have lots of other stuff going on but a day here and there is working fine
Plenum chamber off
Lower manifold off
New manifold in place
Supercharger in place
Throttle body adapter with throttle body attached and idle speed control valve too
New 320cc injectors test fitted to new manifold and new billet all fuel rails, injectors have all been cleaned and flow tested with paperwork and all new seals delivered for only £56 all the way from Vancouver!
Yesterday i fitted new contacts and plunger to the starter solenoid (they wasn't an issue but i don't fancy having to take it all apart in two months time) hoovered out the V and fitted the new manifold, then played about with the fuel rails and fuel pipes ate the front and rear of the rails, the originals aren't going to fit so i have ordered some an fittings and good quality hose!
Theres lots to do, well loads to be honest but it all fits and lines up with what it should line up with so im very VERY happy
This is going to be awesome!
Was great catching up with you at ace... Love your build... Giving me ideas.
Bit of an update, its done, finished, back on the road and working well
https://www.youtube.com/watch?v=uG6tOqVKZmc
Well done you
Amazing!