ATS Racing TD06 20g + TIAL External Wastegate

toxo
Posting Freak

4,843

29-03-2017, 05:56 AM

#1

I've got a TD06 sat in a cupboard in my front room and have had for months. I need the money for an exciting new project so it's got to go. From the original for sale ad:

Greddy-Matt TD06 Turbo (ATS turbo) Less than 600 miles on it!! £600 (or £800 with the Waste gate etc)

http://www.imoc.co.uk/forums/viewtopic.php?t=120358

The ATS kit uses a larger compressor wheel and a reshaped compressor housing. They rate the kit at good for 250-500bhp on a 2.0 4pot engine.

Turbo has no shaft play and includes the wastegate, but no oil or water lines, no manifold adaptor etc. You'd need to source these all yourself (which is part of the reason I haven't used the turbo yet).

I've contacted ATS in the states and they've said they'd be happy to provide an adaptor and screamer pipe for the turbo and wastegate to bolt up to a standard MR2 turbo manifold, and all required oil and water lines for about £400, which would make the turbo plug and play. Of course this turbo could be attached to more or less anything, it is standard T3/T4 fitment and was a Mitsubishi turbo when it started life.

Obviously the turbo is still exactly as it was when bought, as it hasn't been on a car since, so no extra miles on it or anything. I paid £800 with a modified rev1 MR2 manifold & screamer pipe, which I've since sold as they were no use to me. Because I've never used the turbo on a car while it's been in my posession it would have to be sold-as-seen with no warranty.

http://www.atsracing.net/ats_racing_td06...er_kit.htm

I have seen a turbo the same on a friends MR2 producing 350bhp through a chargecooler on stock internals. They are safer to run at 1.2bar as they are a more efficient design than the Toyota CT series turbos, so they don't heat up the intake anywhere near as much.

Pics:

[Image: SDC10769.JPG]

If the painted compressor housing puts you off there is a guy selling new ones (suitable for the 20g wheel in this turbo) on eBay for £70. The turbo is held together with a v-band and a large spring clip and has aligning pins so swapping the housings over would be trivial.

£700 collected including the TIAL wastegate, downpipe, and all the bolts and gaskets that I've got to go with it.

toxo
Posting Freak

4,843

05-04-2017, 01:18 AM

#2

I've had some interest in getting the turbo delivered, so have boxed it up and got some quotes. It can be couriered with UPS, insured to cover the value up to £700 for about £40. I can deliver the unit within 50 miles of Milton Keynes for that much, so there are options available if required.

FirebirdPhil
Posting Freak

7,101

05-04-2017, 07:58 AM

#3

I was this close to putting that on my old Lex.......................... Get rid of the flame thrower and get more POWER.

"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"

toxo
Posting Freak

4,843

07-05-2017, 04:43 AM

#4

Offers?! MUST GO!!

toxo
Posting Freak

4,843

12-07-2017, 12:41 AM

#5

Now on eBay... http://cgi.ebay.co.uk/ws/eBayISAPI.dll?V...0575948747

toxo
Posting Freak

4,843

21-07-2017, 01:08 AM

#6

Relisted due to numpty :Chair:

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?V...0580679394

FirebirdPhil
Posting Freak

7,101

21-07-2017, 03:25 AM

#7

Numpty is the word, won it for a bargain and didn't take it:Bazza:

"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"

Recently Browsing
1 Guest(s)