Help me find the Pin-out
Help me find the Pin-out
and there is no multipin connector on the rear now this connector gives me the following
Front L/R Line Level
Rear L/R Line Level
Sub Line level
AUX1 input Line level
Reverse trigger feed
now i only care about the reverse trigger feed for now as that is what i was going to install
sony technical are of no use and have given me a part number
183420421
which brings nothing up....
so im going back to my normal way of doing things im going to make a connector but need the schematics or pin config of the unit
any ideas people
Rabs
Ok so the radio that was in the stagea when i got it was a sony XAV-60 seems a fairly good unit, so i pulled it out the car today to look into wiring the reverse camera in
and there is no multipin connector on the rear now this connector gives me the following
Front L/R Line Level
Rear L/R Line Level
Sub Line level
AUX1 input Line level
Reverse trigger feed
now i only care about the reverse trigger feed for now as that is what i was going to install
sony technical are of no use and have given me a part number
183420421
which brings nothing up....
so im going back to my normal way of doing things im going to make a connector but need the schematics or pin config of the unit
any ideas people
Rabs
yeah on the exploded diagram its the bit labelled up as connector 4 bottom left of the rear of the unit its bugging me like hell im tempted to open it up and see if the board is labelled lol
jay_russell
09-04-2018, 10:19 AM #6sounds like the only option as there is no service book out on it
Linky
bassed on this i make it top left of the white connector for the input.....
ok well i couldnt b bothered to go take it out th car yet so had a hunt around the net and found this site which shows the pins on the loom
Linky
bassed on this i make it top left of the white connector for the input.....
1 Guest(s)
1 Guest(s)
Views 969
Last Post by