Back boosting again :)
Back boosting again :)
23-07-2018, 08:09 AM
Unfortunately I didn't take many pics, just got stuck in instead. But here's my work list:
1. Cut the header heatshield so that it no longer hits against the supercharger
2. Fully clean the engine bay as there's all kinds of metal shavings and stuff floating about in there.
3. Clean the radiator and rad fans as they are covered in sticky white stuff (coolant)
4.Mount new Supercharger....
![[Image: l_photo4.jpg]](http://i2.sqi.sh/s_3/agE/l_photo4.jpg)
One thing that really annoyed me with the previous install was that straight out of the supercharger outlet it hit a 45deg bend, then a 30deg bend in the other direction. So I rotated the supercharger volute slightly and managed to get it to line up perfectly with anothe rpipe below. This allowed me to use 30cm of 4ply to join the two in a straight line. Totally eliminating all bends:
![[Image: l_photo6.jpg]](http://i2.sqi.sh/s_3/agE/l_photo6.jpg)
5. I'm also getting a bit tired of blue, so I started wrapping some of the cables in black or stainless steel braid:
![[Image: l_photo5.jpg]](http://i2.sqi.sh/s_3/agE/l_photo5.jpg)
![[Image: l_photo7.jpg]](http://i2.sqi.sh/s_3/agE/l_photo7.jpg)
For anyone who wants blue stuff (tubes, hose, wire...etc) let me know as I'm going to be selling a lot of it shortly.
Took the car out for a quick drive at about 4pm once I'd finished and MAAAAAAAN is it good to be boosting again. Highest I've hit so far was 12.9PSI, but that was with the car in 'D' and no sports mode so it was shifting gears lower down the RPM range.
So I started at 11am this morning with the eye to doing everything properly and sorting out all the niggles I had from my previous supercharger install.
Unfortunately I didn't take many pics, just got stuck in instead. But here's my work list:
1. Cut the header heatshield so that it no longer hits against the supercharger
2. Fully clean the engine bay as there's all kinds of metal shavings and stuff floating about in there.
3. Clean the radiator and rad fans as they are covered in sticky white stuff (coolant)
4.Mount new Supercharger....
One thing that really annoyed me with the previous install was that straight out of the supercharger outlet it hit a 45deg bend, then a 30deg bend in the other direction. So I rotated the supercharger volute slightly and managed to get it to line up perfectly with anothe rpipe below. This allowed me to use 30cm of 4ply to join the two in a straight line. Totally eliminating all bends:
5. I'm also getting a bit tired of blue, so I started wrapping some of the cables in black or stainless steel braid:
For anyone who wants blue stuff (tubes, hose, wire...etc) let me know as I'm going to be selling a lot of it shortly.
Took the car out for a quick drive at about 4pm once I'd finished and MAAAAAAAN is it good to be boosting again. Highest I've hit so far was 12.9PSI, but that was with the car in 'D' and no sports mode so it was shifting gears lower down the RPM range.
23-07-2018, 08:25 AM
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
23-07-2018, 08:25 AM #3Top job mate!!
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
23-07-2018, 08:27 AM
I like blue, as you know. Though some of yours might be bigger than mine! PM me what ya got.
![[Image: tempsig2.jpg]](http://i121.photobucket.com/albums/o227/84stoney/tempsig2.jpg)
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:All very good mate. I like the bend eliminating. I think it's your new rad that is more likely to get white sticky stuff on it when it arrives! :lol:
I like blue, as you know. Though some of yours might be bigger than mine! PM me what ya got.
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:
23-07-2018, 09:36 AM
Lexusboy I shall have to pop over to see what pipe work fits onto my car....
Deffo mate. I've got quite a lot of generic size tubing so there's bound to be some that fits. You're not far away from me at all are you (wickers)?
Stoney All very good mate. I like the bend eliminating. I think it's your new rad that is more likely to get white sticky stuff on it when it arrives! :lol:
I like blue, as you know. Though some of yours might be bigger than mine! PM me what ya got.
Lol yeah. The new radiator will have me
![[Image: love-smiley-086%20wank.gif]](http://www.marriedandflirtingchat.com/forums/images/smilies/love-smiley-086%20wank.gif)
(cleaning it with lots of alu cleaner 
)WIll drop ya a PM tho. I've got lots of vacuum hose, lots of 10mm ID hose (used a lot in the IS)...etc
Edited 03-09-2011, 07:13 PM by jimxms.
Lexusboy I shall have to pop over to see what pipe work fits onto my car....
Deffo mate. I've got quite a lot of generic size tubing so there's bound to be some that fits. You're not far away from me at all are you (wickers)?
Stoney All very good mate. I like the bend eliminating. I think it's your new rad that is more likely to get white sticky stuff on it when it arrives! :lol:
I like blue, as you know. Though some of yours might be bigger than mine! PM me what ya got.
Lol yeah. The new radiator will have me
(cleaning it with lots of alu cleaner )WIll drop ya a PM tho. I've got lots of vacuum hose, lots of 10mm ID hose (used a lot in the IS)...etc
23-07-2018, 10:10 AM
also interested in the blue piping, bring it to JAE?
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
23-07-2018, 10:10 AM #7Looks good mate!
also interested in the blue piping, bring it to JAE?
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
23-07-2018, 10:12 AM
Sparkystav Looks good mate!
also interested in the blue piping, bring it to JAE?
Should have had an Outlaw JAE bring and buy sale!!
speedfreek
23-07-2018, 10:12 AM #8Sparkystav Looks good mate!
also interested in the blue piping, bring it to JAE?
Should have had an Outlaw JAE bring and buy sale!!
'99 Lexus IS200 SE Navigator
[SIZE=3]'93 Mazda Eunos Roadster Turbo[/SIZE]
(Current project)
[SIZE=3]'93 Mazda Eunos Roadster Turbo[/SIZE]
(Current project)
23-07-2018, 10:38 AM
jimxms Deffo mate. I've got quite a lot of generic size tubing so there's bound to be some that fits. You're not far away from me at all are you (wickers)?
Lol yeah. The new radiator will have me
WIll drop ya a PM tho. I've got lots of vacuum hose, lots of 10mm ID hose (used a lot in the IS)...etc
i need about 4 inches of blue vac hose....just noticed today my dump valve vac hose is starting to perish and has big splits not through though but not far off it......:cursing: how much??
![[Image: ormiedit1-2.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/ormiedit1-2.jpg)
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
jimxms Deffo mate. I've got quite a lot of generic size tubing so there's bound to be some that fits. You're not far away from me at all are you (wickers)?
Lol yeah. The new radiator will have me
WIll drop ya a PM tho. I've got lots of vacuum hose, lots of 10mm ID hose (used a lot in the IS)...etc
i need about 4 inches of blue vac hose....just noticed today my dump valve vac hose is starting to perish and has big splits not through though but not far off it......:cursing: how much??
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
23-07-2018, 10:45 AM
ormi i need about 4 inches of blue vac hose....just noticed today my dump valve vac hose is starting to perish and has big splits not through though but not far off it......:cursing: how much??
Mate i have about 10m of blue 10mm pvc hose if thats any use? you have to put it in a jug of hot water to get it on, but its solid sturdy
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
23-07-2018, 10:45 AM #10ormi i need about 4 inches of blue vac hose....just noticed today my dump valve vac hose is starting to perish and has big splits not through though but not far off it......:cursing: how much??
Mate i have about 10m of blue 10mm pvc hose if thats any use? you have to put it in a jug of hot water to get it on, but its solid sturdy
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Recently Browsing
1 Guest(s)
1 Guest(s)
Recently Browsing
1 Guest(s)
1 Guest(s)
Related Threads…
Replies 15
Views 444
Views 444
15-11-2019, 04:07 PM
Last Post byRabster
Last Post by
Replies 9
Views 407
Views 407
08-03-2019, 09:29 AM
Last Post bysprinter2012
Last Post by
Replies 9
Views 391
Views 391
12-01-2019, 09:30 AM
Last Post byel_gencer
Last Post by
Replies 9
Views 480
Views 480
29-03-2018, 01:13 AM
Last Post byparthiban
Last Post by
Replies 9
Views 541
Views 541
30-12-2017, 06:49 AM
Last Post byDaveEdin
Last Post by