Help find me the pin dimension
Help find me the pin dimension
M11
D1
M74
D31
They are known as SMJ connectors by nissan (super multiple junction)
All 4 connectors have 39 connector slots in each i know for a fact they are not all full in both sides, i would like to track down the right pin dimensions so i can add my own loom inot each connector any one have any ideas
Cheers
ok guys and girls i have a project under way but i need to track down the pin dimension for the connectors in thr front doors of the 350z
M11
D1
M74
D31
They are known as SMJ connectors by nissan (super multiple junction)
All 4 connectors have 39 connector slots in each i know for a fact they are not all full in both sides, i would like to track down the right pin dimensions so i can add my own loom inot each connector any one have any ideas
Cheers
![[Image: tempsig2.jpg]](http://i121.photobucket.com/albums/o227/84stoney/tempsig2.jpg)
ad: It was a tough call to make, but the Supercharged IS200 is being retired. 
Hurricane Go to nissan, speak to parts desk. Buy correct terminals for connector
:thumbup1: They will have a manual like the Toyota 'Wire Harness Repair' one that I linked to in the tech section, with all the connectors and pins part numbers in.
Or find a written off one on eBay and get the connector + tails cut off, that way you'll have loads of spare pins for your projects
Hurricane Go to nissan, speak to parts desk. Buy correct terminals for connector
:thumbup1: They will have a manual like the Toyota 'Wire Harness Repair' one that I linked to in the tech section, with all the connectors and pins part numbers in.
Or find a written off one on eBay and get the connector + tails cut off, that way you'll have loads of spare pins for your projects
i contacted my local nissan they didnt want to offer any info on the pin details :angry:
have contacted few brakers they want 60+ for the connector and a small harness
i contacted my local nissan they didnt want to offer any info on the pin details :angry:
if im honest i dont use the forums that often as they all seem to not want to help unless you are part of the inner circle half of my posts go un aswered for sometime
i may seeif i can track down the manufactuere of the connector and do it that way as i did it on the is220 dash and found all the pin info out that way and ordered the pins from RS
1 Guest(s)
1 Guest(s)