Side markers on a car
Side markers on a car
I HATE THESE THINGS ON CARS
so can i take them off if i replace with indicators in the wing mirrors ?
give the front wings a smooth out
will it still pass a MOT
will my policeman get funny on the road if i dont have them ?
Right so i have the Masa R34 Front end conversion ready to go on my car but at present it still has the side indicators/markers on the front wings
I HATE THESE THINGS ON CARS
so can i take them off if i replace with indicators in the wing mirrors ?
give the front wings a smooth out
will it still pass a MOT
will my policeman get funny on the road if i dont have them ?
The only rules about them are that they are visible from the side and rear of the car at a certain angle. I'll dig out the blurb and check.
Side repeaters and side markers are 2 different things! I take it you're on about side repeaters as you want to put indicators in the wing mirrors. Side markers tend to be nearer the corners of cars, usually for the US market.
The only rules about them are that they are visible from the side and rear of the car at a certain angle. I'll dig out the blurb and check.
![[Image: tempsig2.jpg]](http://i121.photobucket.com/albums/o227/84stoney/tempsig2.jpg)
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:Yes, I am pretty sure your side repeaters can be anywhere on the front half of the side of the car. As long as they are visible from a certain angle (basically almost 180 degrees). Certainly smoothing factory side repeaters and replacing with ones in the wing mirrors is never usually a problem on any vehicle.
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:60 degrees to 5 degrees view from the rear of the car!
I know this is IVA not MOT but see page 135 here: http://www.dft.gov.uk/vosa/repository/IV...Manual.pdf
60 degrees to 5 degrees view from the rear of the car!
Rabster yeah i have an engraver
^^^ :lol:
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
Rabster yeah i have an engraver
^^^ :lol:
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
but flush mounted into the wing mirror casing on the stagea
Have a look at a recent Merc or BMW, to get a clearer idea!
1 Guest(s)
1 Guest(s)
Views 222
Last Post by