JapCarForum General Discussions New Members A big hello from Manchester

A big hello from Manchester

A big hello from Manchester

Pages (3): Previous 1 2 3 Next
Jon
Member
189
09-02-2020, 08:02 AM
#11
crafty_carper I was in trafford friday night as it happens. I go more or less every week. Mine is a GREY one though. The silver one is a polish lad with an Altezza......Mine would have had bright green rear wheels on if you noticed it.

Ive only got a couple pics wich i will put up, and get some better ones when its stops snowing :/

Tom

Yeah I seen yours, I remember the green wheels, I thought it was silver though, must of been the light.

I seen the Polish lad in the Altezza, i had a little 'play' him on our way back to McDonalds, after I got chatting to him, he said he thought he was going to leave me behind Confusedneaky2: I dont think he expected me to sit along side him!

I was in the Red/Gingery IS200, I used to go every week without fail until about 6 months ago, now I only go when I can be bothered, its not as good as it used to be, its too busy now
Jon
09-02-2020, 08:02 AM #11

crafty_carper I was in trafford friday night as it happens. I go more or less every week. Mine is a GREY one though. The silver one is a polish lad with an Altezza......Mine would have had bright green rear wheels on if you noticed it.

Ive only got a couple pics wich i will put up, and get some better ones when its stops snowing :/

Tom

Yeah I seen yours, I remember the green wheels, I thought it was silver though, must of been the light.

I seen the Polish lad in the Altezza, i had a little 'play' him on our way back to McDonalds, after I got chatting to him, he said he thought he was going to leave me behind Confusedneaky2: I dont think he expected me to sit along side him!

I was in the Red/Gingery IS200, I used to go every week without fail until about 6 months ago, now I only go when I can be bothered, its not as good as it used to be, its too busy now

crafty_carper
Junior Member
13
11-02-2020, 02:22 AM
#12
Haha, yeah ive had a play with him a few times too.

I spotted yours straight away when I first come on, was gonna stop when you were parked up at the top but the mrs didnt wanna park all way up there haha

Ill have to come have a look next time your around, have a good natter. Guessing you got the TTE kit?....anything else you had done?

Tom
crafty_carper
11-02-2020, 02:22 AM #12

Haha, yeah ive had a play with him a few times too.

I spotted yours straight away when I first come on, was gonna stop when you were parked up at the top but the mrs didnt wanna park all way up there haha

Ill have to come have a look next time your around, have a good natter. Guessing you got the TTE kit?....anything else you had done?

Tom

Jon
Member
189
11-02-2020, 11:29 AM
#13
Yes and No to the TTE kit. No its not the exact TTE kit, but Yes as to it being practically the same.

I used the same supercharger (Eaton M62, from a Merc SLK230), made my own cradle, used a 130mm pulley from a Merc SLK230 water pump, ebay intercooler, HKS BOV, Patriks Black Box, pipercross air filter and ebay pipework/hoses. Ran it like that with a Cat back 2.5" exhaust and a Camcon piggyback ECU for about 12months before I decatted the manifold, and decatted the main cat. Finally, I changed the standard injectors for 1ZZ injectors from a Toyota Avensis/Celica etc.

I have a 160mm pulley sat here from a Merc Sprinter, but I need to get a 15mm spacer made up before I can put it on. I want to install a AFR gauge before I do that to make the everything is running correctly/safely.

I'll try and come out this Friday. Fell free to come over for a chat/look at my charger install, but its not pretty - function over form and all that.
Jon
11-02-2020, 11:29 AM #13

Yes and No to the TTE kit. No its not the exact TTE kit, but Yes as to it being practically the same.

I used the same supercharger (Eaton M62, from a Merc SLK230), made my own cradle, used a 130mm pulley from a Merc SLK230 water pump, ebay intercooler, HKS BOV, Patriks Black Box, pipercross air filter and ebay pipework/hoses. Ran it like that with a Cat back 2.5" exhaust and a Camcon piggyback ECU for about 12months before I decatted the manifold, and decatted the main cat. Finally, I changed the standard injectors for 1ZZ injectors from a Toyota Avensis/Celica etc.

I have a 160mm pulley sat here from a Merc Sprinter, but I need to get a 15mm spacer made up before I can put it on. I want to install a AFR gauge before I do that to make the everything is running correctly/safely.

I'll try and come out this Friday. Fell free to come over for a chat/look at my charger install, but its not pretty - function over form and all that.

mattlaw
Senior Member
572
11-02-2020, 11:37 AM
#14
Let me know who's out, I only live 2 mins down the road
mattlaw
11-02-2020, 11:37 AM #14

Let me know who's out, I only live 2 mins down the road

Jon
Member
189
11-02-2020, 12:11 PM
#15
mattlaw Let me know who's out, I only live 2 mins down the road

where abouts do you live, just out of interest?
Jon
11-02-2020, 12:11 PM #15

mattlaw Let me know who's out, I only live 2 mins down the road

where abouts do you live, just out of interest?

mattlaw
Senior Member
572
11-02-2020, 12:13 PM
#16
I'm in flixton, quite a few of us in Manchester now
mattlaw
11-02-2020, 12:13 PM #16

I'm in flixton, quite a few of us in Manchester now

Jon
Member
189
11-02-2020, 12:16 PM
#17
Flixton isnt far, I'm only in Irlam.
Jon
11-02-2020, 12:16 PM #17

Flixton isnt far, I'm only in Irlam.

crafty_carper
Junior Member
13
13-02-2020, 09:07 AM
#18
Sounds good pal....
PM me your mobile number & ill give you a text if and when im coming down. Ill more than likely be there friday.

Tom
crafty_carper
13-02-2020, 09:07 AM #18

Sounds good pal....
PM me your mobile number & ill give you a text if and when im coming down. Ill more than likely be there friday.

Tom

mattlaw
Senior Member
572
17-02-2020, 11:14 AM
#19
I take it that was you leaving maccies last night lol
mattlaw
17-02-2020, 11:14 AM #19

I take it that was you leaving maccies last night lol

crafty_carper
Junior Member
13
19-02-2020, 02:24 PM
#20
More than likely mate yeah......is yours the one on the rex8 wheels?
crafty_carper
19-02-2020, 02:24 PM #20

More than likely mate yeah......is yours the one on the rex8 wheels?

Pages (3): Previous 1 2 3 Next
Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 20
Views 920
18-07-2018, 11:09 AM
Last Post by Rabster